Fault Path Direct-Current Resistance Based Off-Line Single-Phase-To-Ground Fault Location

doi:10.11930/j.issn.1004-9649.201903072

Abstract

Abstract: In order to figure out the off-line transmission line fault location, a new fault location method based on fault path direct current resistance measurement is proposed. Firstly, an off-line fault detection and diagnosis method based on three-phase insulation resistance measurement is proposed, including fault type and fault phase diagnosis. Then the single-phase-to-ground fault location method is proposed which occurred the most frequently. In the proposed methods, the ground resistance and three phase direct-current resistance between two substations are measured firstly. Then considering the effect of fault resistance, the KVL is used to form two independent equations which contain two unknown numbers, fault resistance and fault distance. Then fault distance and fault resistance can be figured out by solving equation set. The proposed method is verified in the PSCAD/EMTDC by simulation. The correctness and accuracy of the proposed fault location method are verified. Also it is verified in the field test. It is helpful for clearing the fault for newly-built lines and overhaul lines. It is very important to ensure that transmission lines are put into operation on time.

Key words: direct-current resistance, fault location, transmission line, off-line: fault diagnosis

LI Fuzhi, ZHENG Weibin, ZHANG Wenhai, ZHANG Zhiyong, LIN Defeng, ZHANG Xubo, ZHANG Rongjian. Fault Path Direct-Current Resistance Based Off-Line Single-Phase-To-Ground Fault Location[J]. Electric Power, 2021, 54(2): 140-146.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.201903072

https://www.electricpower.com.cn/EN/Y2021/V54/I2/140

References

[1] HOSSAN M S, CHOWDHURY B. Data-driven fault location scheme for advanced distribution management systems[J]. IEEE Transactions on Smart Grid, 2019, 10(5): 5386-5396.
[2] 丁建忠, 鲍有理, 李澄. 基于电流计算的同杆双回线故障测距算法研究[J]. 中国电力, 2016, 49(8): 59-63
DING Jianzhong, BAO Youli, LI Cheng. Fault location algorithm based on current calculation for parallel transmission lines on same tower[J]. Electric Power, 2016, 49(8): 59-63
[3] DE AGUIAR R A, DALCASTAGNÊ A L, ZÜRN H H, et al. Impedance-based fault location methods: Sensitivity analysis and performance improvement[J]. Electric Power Systems Research, 2018, 155: 236-245.
[4] KRISHNATHEVAR R, NGU E E. Generalized impedance-based fault location for distribution systems[J]. IEEE Transactions on Power Delivery, 2012, 27(1): 449-451.
[5] 尤向阳, 葛笑寒, 吴萍. 基于零序电流波形相似度的接地故障定位方法[J]. 电力系统保护与控制, 2019, 47(14): 125-130
YOU Xiangyang, GE Xiaohan, WU Ping. Grounding fault location method based on waveform similarity of zero-sequence current[J]. Power System Protection and Control, 2019, 47(14): 125-130
[6] LIN S, HE Z Y, LI X P, et al. Travelling wave time-frequency characteristic-based fault location method for transmission lines[J]. IET Generation, Transmission & Distribution, 2012, 6(8): 764.
[7] 李泽文, 周卿松, 曾祥君, 等. 基于行波模量传输时差的配电网接地故障定位新方法[J]. 中国电力, 2015, 48(9): 67-72
LI Zewen, ZHOU Qingsong, ZENG Xiangjun, et al. New fault location method based on time difference of traveling wave mode-component in distribution network[J]. Electric Power, 2015, 48(9): 67-72
[8] 杨鹏, 杨以涵, 杨景, 等. 基于直流法的配电网单相接地故障离线定位研究[J]. 电力系统保护与控制, 2008, 36(22): 57-60, 71
YANG Peng, YANG Yihan, YANG Jing, et al. Study of DC off-line fault location method for distribution networks with single grounding phase[J]. Power System Protection and Control, 2008, 36(22): 57-60, 71
[9] 张利, 杨以涵, 杨秀媛. 配电网离线故障定位方法研究与实现[J]. 电力系统自动化, 2009, 33(1): 70-74
ZHANG Li, YANG Yihan, YANG Xiuyuan. Research and implementation of off-line fault location for distribution network[J]. Automation of Electric Power Systems, 2009, 33(1): 70-74
[10] 陈天翔, 王寅仲, 温定筠, 等. 电气试验(第三版) [M]. 北京: 中国电力出版社, 2005.
[11] 李文利, 唐信, 孙威, 等. 主变直流电阻超标故障分析[J]. 变压器, 2019, 56(6): 83-86
LI Wenli, TANG Xin, SUN Wei, et al. Fault analysis of over-standard fault of main transformer DC resistance[J]. Transformer, 2019, 56(6): 83-86
[12] 国家能源局. 中华人民共和国电力行业标准: 交流输电线路工频电气参数测量导则 DL/T 1583—2016[S]. 北京: 中国电力出版社, 2016.
[13] 夏远洋, 李啸骢, 陈飞翔, 等. 基于FastICA的输电线路行波故障测距方法[J]. 电力系统保护与控制, 2019, 47(1): 138-143.
XIA Yuanyang, LI Xiaocong, CHEN Feixiang, et al. FastICA based traveling wave fault location algorithm for transmission lines[J]. Power System Protection and Control, 2019, 47(1): 138-143.
[14] 贾科, 李论, 宣振文, 等. 基于扰动注入的柔性直流配电网主动故障定位及其仿真研究[J]. 电力系统保护与控制, 2019, 47(4): 99-106.
JIA Ke, LI Lun, XUAN Zhenwen, et al. Study on fault location method and simulation for VSC-DC distribution network based on disturbance injection[J]. Power System Protection and Control, 2019, 47(4): 99-106.
[15] 程宏波, 高雅琦, 王勋, 等. 基于故障类型识别的输电线路自适应测距方法[J]. 电力系统保护与控制, 2019, 47(2): 131-138
CHENG Hongbo, GAO Yaqi, WANG Xun, et al. Adaptive fault location method for transmission line based on fault type recognition[J]. Power System Protection and Control, 2019, 47(2): 131-138
[16] 孙沛瑶, 林圣, 刘磊, 等. 融合行波时频信息的HVDC线路雷击点与短路故障点不一致时的定位方法[J]. 电力系统保护与控制, 2019, 47(5): 88-95
SUN Peiyao, LIN Sheng, LIU Lei, et al. Location method for HVDC transmission line under lightning stoke fault with short-circuit fault position different from lighting position based on time-domain and frequency-domain information of traveling waves[J]. Power System Protection and Control, 2019, 47(5): 88-95