基于减温水调节阀门流量特性补偿的汽温控制系统优化

doi:10.11930/j.issn.1004-9649.2016.10.022.06

摘要/Abstract

摘要： 蒸汽温度控制回路的调节品质对火电机组的安全、经济运行至关重要，而执行机构的流量特性直接影响控制系统调节品质。通过分析常用的线性阀门、等百分比阀门和抛物线阀门流量静态特性，并结合控制系统和控制参数的整定分析方法，指出了选用线性调节阀可使控制系统在不同阀门开度下系统调节性能不变，对提高调节系统稳定性最为有利。为了提高实际运行过程阀门开度与流量的线性度，给出了调节阀门流量特性的补偿原理和阀门流量特性补偿函数的求取方法。以某660 MW亚临界机组为例，利用历史数据求取了两侧调节阀门流量修正函数，并对控制回路进行了流量补偿优化。运行实践表明，锅炉过热汽温调节回路经过流量补偿优化后，过热汽温调节品质有了明显的改善。最后，指出了对阀门流量特性进行补偿校正应作为设备检修、维护的定期工作之一。

关键词: 火电机组, 控制系统, 调节阀, 流量特性, 补偿, 优化, 过热汽温

Abstract: The regulation quality of the steam temperature control system is of great importance to the safety and economical operation of thermal generation units. Particularly, the flow characteristics of the governing valve actuator directly affect the regulation quality of the control system. In this paper, through the analysis on the flow static characteristics of linear, equal percentage and parabolic valves and in combination with the tuning of the control system and parameters, it is concluded that the linear governing valve can maintain the regulation quality unchanged at different valve openings, which is good for the improvement of the control system stability. To improve the linearity degree of the governing valve in practical operation, the flow characteristic compensation principles and the calculation methods are put forward. Taking a 660-MW subcritical thermal generation unit for example, the flow characteristics of the A/B governing valves are calculated with the historic data of position and flow, and the flow compensation is applied in the steam temperature control loops. The unit operation result indicates that the regulation quality of the superheated temperature control loops is substantially improved. Finally, it is suggested that the flow characteristic compensation and correction of the valves should be taken regularly as part of the equipment maintenance.

Key words: thermal generation unit, control system, governing valve, flow characteristics, compensation, optimization, superheated steam temperature

中图分类号:

TK268.1

黄卫剑，李一波，万文军. 基于减温水调节阀门流量特性补偿的汽温控制系统优化[J]. 中国电力, 2016, 49(10): 22-27.

HUANG Weijian, LI Yibo, WAN Wenjun. Optimization of the Steam Temperature Control System Based on the Flow Characteristic Compensation of Desuperheating Water Regulating Valve[J]. Electric Power, 2016, 49(10): 22-27.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.2016.10.022.06

https://www.electricpower.com.cn/CN/Y2016/V49/I10/22

参考文献

[1] 孟祥荣，毕贞福. 一种新的大型电站煤粉锅炉蒸汽温度控制方法探讨[J]. 电站系统工程，2009，25（5）：49-50，64．
MENG Xiangrong, BI Zhenfu. Exploration of a new method for control of steam temperature of coal-fired power plant[J]. Power System Engineering, 2009, 25(5): 49-50, 64.
[2] 牛培峰，郭兴华，王磊，等. 火电厂汽包锅炉汽温控制的研究进展与发展趋势[J]. 燕山大学学报，2008，32（4）：367-372．
NIU Peifeng, GUO Xinghua, WANG Lei, et al. Present situation and development of superheated steam temperature control in steam drum boiler of thermal power plant[J]. Journal of Yanshan University, 2008, 32(4): 367-372.
[3] 韩忠旭，阎翠会，张智. 锅炉蒸汽温度鲁棒控制系统研究及其稳定性分析[J]. 中国电机工程学报，2010，30（8）：101-109．
HAN Zhongxu, YAN Cuihui, ZHANG Zhi. Study on robust control system of boiler steam temperature and analysis on its stability [J]. Proceedings of the CSEE, 2010, 30(8): 101-109.
[4] 宋年年，熊淑燕，安舞，等. 带负荷前馈的Smith预估串级汽温控制系统仿真研究[J]. 计算机仿真，1996，13（2）：25-29．
SONG Niannian, XIONG Shuyan, AN Wu, et al. A simulation method of cascade superheated steam temperature system using Smith predictor with load feed forward control[J]. Computer Simulation, 1996, 13(2): 25-29.
[5] 罗嘉，李锋，张宏福，等. 过热汽温增益自适应Smith预估控制[J]. 电力系统及其自动化学报，2010，22（1）：156-160.
LUO Jia, LI Feng, ZHANG Hongfu, et al. Gain adaptive smith prediction control of superheated steam temperature[J].Proceedings of the CSU-EPSA, 2010, 22(1): 156-160.
[6] 张虹，陈淑羚，张兵. 仿人智能控制器的模糊自整定[J]. 内蒙古工业大学学报（自然科学版），1999（3）：201-205.
ZHANG Hong, CHEN Shuling, ZHANG Bing. A self-tuning approach of HSIC based on fuzzy inference[J]. Journal of Inner Mongolia Polytechnic University, 1999(3): 201-205.
[7] 易杰. 模糊自适应PID控制器的设计及应用研究[J]. 制造业自动化，2009（9）：141-143，186．
YI Jie. Application research and design of self-adjusting controller of PID parameter[J]. Manufacturing Automation, 2009(9): 141-143, 186.
[8] 于希宁，管志敏，魏文超. Fuzzy自调整PID的Smith预估循环流化床控制系统[J]. 现代电力，2007，24（2）：61-65．
YU Xining, GUAN Zhimin, WEI Wenchao. CFB boiler control systems based on Fuzzy self-tuning PID Smith controllers[J]. Modern Electric Power, 2007, 24(2): 61-65.
[9] 董红生. 基于连续继电辨识的自整定PID控制器[J]. 微计算机信息，2004，20（12）： 22-23，70．
DONG Hongsheng. Research on auto-tuning PID controller based on sequential rely identification[J]. Control & Automation, 2004, 20(12): 22-23, 70.
[10] 王田，薛建中，习志勇，等. 基于RBF神经网络辨识的过热蒸汽温度控制[J]. 热力发电，2008，37（10）：87-91，94．
WANG Tian, XUE Jianzhong, XI Zhiyong, et al. Control of superheated steam temperature based on RBF neural network identification [J]. Thermal Power Generation, 2008, 37(10): 87-91, 94.
[11] 刘吉臻，李建强，张栾英，等. 用RBF网络整定的火电厂主汽温PID串级控制系统[J]. 动力工程，2006（1）：89-92，134.
LIU Jizhen, LI Jianqiang, ZHANG Luanying, et al. PID cascade control system of power plant main steam temperature network tuning [J]. Journal of Power Engineering, 2006(1): 89-92, 134.
[12] 卫红. 调节阀流量特性变化对调节精度的影响[J]. 中国氯碱， 2014，34（7）：44-46．
WEI Hong. Research of flow characteristics change for control precision effect [J]. China Chlor-Alkali, 2014, 34(7): 44-46.
[13] 王鹏. 调节阀的选择及流量特性分析[J]. 中国机械，2014（7）： 67-67.
[14] 董高峰. 调节阀的正确选型及注意事项[J]. 计量技术，2007（10）：70-72.
[15] 陈立锋. PID控制技术及其参数整定方法[J]. 济宁学院学报， 2008（6）：23-24，27．
[16] 詹训进. 用Ziegler-Nichols方法拓展整定PID调节器的参数[J]. 韶关学院学报（自然科学），2006（9）：42-45.
[17] 董红生. 基于继电辨识的大时滞对象的内模控制[J]. 自动化仪表，2006（11）：14-17．
[18] 文新宇，张井岗，赵志诚. 内模控制研究综述[J]. 电气自动化， 2003（1）：3-7.
[19] 陈刚，丁纪文，吴辉. 减温水调节阀流量特性预补偿[J]. 通用机械，2013（7）：70-74．
[20] 王学斌，金秀梅. 流量对阀门特性的补偿方法[J]. 锅
炉制造， 1999（2）： 54-56．
WANG Xuebin, JIN Xiumei. Flow compensation for valve performance [J]. Boiler Manufacturing, 1999(2): 54-56.