Temperature and Efficiency Analysis of Line Laser in Removing Tree Barriers for Overhead Lines

doi:10.11930/j.issn.1004-9649.202004059

Abstract

Abstract: Overhead line tree barriers may cause line tripping faults and are a major hidden danger to line operation. It is a safe and effective way to remove the tree barriers under the transmission lines by high energy laser. By taking six types of typical trees as the research objects, finite element models are established to analyze the temperature distribution characteristics and burning efficiency of these trees under point and line laser cauterization, and point and line cauterization experiments are conducted respectively. The results show that the temperature of the tree surface decreases sharply from the the laser spot center to the spot edge, and the thermal effect is only obvious in the center of the burning area, and the temperature rising rate at the spot center slows down with the heating time. Within the same time period, compared to other five tree types, Paulownia has the highest temperature, reaching 1259.20 °C at maximum in 15 s. When the output power of laser is the same, the point laser and line laser have an average burning speed of 0.37 mm/s and 5.45 mm/s, respectively. The experimental results show that the line laser is 6.53-8.45 times faster than the point laser in average burning speed, which indicates that the line laser has a significantly higher burning speed than that of point laser. The research results can provide an important basis for application of line laser in clearing tree barriers.

Key words: point laser, line laser, tree barrier, burning efficiency, transmission line

XU Xin, FANG Chunhua, ZHI Li, DING Can, DONG Xiaohu, CHENG Sheng, SUN Wei, TAO Yuning. Temperature and Efficiency Analysis of Line Laser in Removing Tree Barriers for Overhead Lines[J]. Electric Power, 2022, 55(5): 94-101.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.202004059

https://www.electricpower.com.cn/EN/Y2022/V55/I5/94

References

[1] 路艳巧, 孙翠英, 曹红卫, 等. 基于边缘计算与深度学习的输电设备异物检测方法[J]. 中国电力, 2020, 53(6): 27–33
LU Yanqiao, SUN Cuiying, CAO Hongwei, et al. Foreign body detection method for transmission equipment based on edge computing and deep learning[J]. Electric Power, 2020, 53(6): 27–33
[2] 邓永强, 陈婧, 郑聪, 等. 基于有限元仿真和微分进化算法的电场测量仪支架优化[J]. 智慧电力, 2020, 48(2): 71–77
DENG Yongqiang, CHEN Jing, ZHENG Cong, et al. Optimization design of electric field measuring instrument holder based on finite element simulation and differential evolution algorithm[J]. Smart Power, 2020, 48(2): 71–77
[3] 王勇, 苗虹, 莫思特, 等. 高压架空输电线路防冰、融冰、除冰技术研究综述[J]. 电力系统保护与控制, 2020, 48(18): 178–187
WANG Yong, MIAO Hong, MO Site, et al. Summary of research on anti-ice, ice melting and de-icing of high voltage overhead transmission lines[J]. Power System Protection and Control, 2020, 48(18): 178–187
[4] 戴永东, 王茂飞, 唐达獒, 等. 基于双视卷积神经网络的输电线路自动巡检[J]. 电力科学与技术学报, 2021, 36(5): 201–210
DAI Yongdong, WANG Maofei, TANG Daao, et al. Research on automatic inspection of transmission line based on cross-view convolution neural network[J]. Journal of Electric Power Science and Technology, 2021, 36(5): 201–210
[5] 楼平, 岳灵平, 李龙. 新型激光除异物技术在特高压输电线路的应用[J]. 浙江电力, 2018, 37(6): 6–9
LOU Ping, YUE Lingping, LI Long. Application of new laser removal technology of foreign bodies in UHV transmission lines[J]. Zhejiang Electric Power, 2018, 37(6): 6–9
[6] 周维维, 樊卫华, 姜姗. 激光异物清除器装置研究[J]. 计算机测量与控制, 2018, 26(7): 123–127
ZHOU Weiwei, FAN Weihua, JIANG Shan. Research on laser foreign body remover device[J]. Computer Measurement & Control, 2018, 26(7): 123–127
[7] 叶德茂, 颜世恒, 张志刚. 远距离激光清障试验研究及机理分析[J]. 中国造船, 2019, 60(增刊1): 117–122
YE demao, YAN Shiheng, ZHANG Zhigang. Experimental research and mechanism analysis of long-distance laser obstacle removal[J]. Shipbuilding of China, 2019, 60(S1): 117–122
[8] 方春华, 周秋雨, 李景, 等. 瓷质绝缘子表面激光辐射温度和应力特性研究[J]. 高压电器, 2019, 55(6): 151–156, 163
FANG Chunhua, ZHOU Qiuyu, LI Jing, et al. Investigation on temperature and stress characteristics of porcelain insulator surface under laser irradiation[J]. High Voltage Apparatus, 2019, 55(6): 151–156, 163
[9] 陈杰, 梁伟, 张志坚, 等. 架空线路异物激光清除技术研究[J]. 激光技术, 2017, 41(5): 659–663
CHEN Jie, LIANG Wei, ZHANG Zhijian, et al. Study on laser removal technology of foreign bodies on overhead transmission lines[J]. Laser Technology, 2017, 41(5): 659–663
[10] 赵元林, 智勇军, 岐召阳. 便携式输电线路异物处理装置的研制[J]. 电力安全技术, 2017, 19(7): 44–47
ZHAO Yuanlin, ZHI Yongjun, QI Zhaoyang. Development of portable foreign matter treatment device for transmission line[J]. Power Security Technology, 2017, 19(7): 44–47
[11] 陈前荣, 王国玉, 陈永光, 等. 1064nm激光大气透过率数据库的建立与应用[J]. 激光与红外, 2007, 37(7): 610–613
CHEN Qianrong, WANG Guoyu, CHEN Yongguang, et al. Creation and application of the atmospheric transmittance database for 1064nm laser[J]. Laser & Infrared, 2007, 37(7): 610–613
[12] 黄清, 魏旭, 周志成. 激光对架空输电导线的温度影响研究[J]. 江苏电机工程, 2016, 35(6): 45–49
HUANG Qing, WEI Xu, ZHOU Zhicheng. Research on temperature effect of laser on overhead transmission line[J]. Jiangsu Electrical Engineering, 2016, 35(6): 45–49
[13] 李鸿泽, 陈光, 刘洋, 等. 架空线路典型导线与异物激光烧蚀特性试验研究[J]. 高电压技术, 2015, 41(增刊1): 107–111
LI Hongze, CHEN Guang, LIU Yang, et al. Experimental study on laser ablation characteristics of typical conductors and foreign matters of overhead lines[J]. High Voltage Technology, 2015, 41(S1): 107–111
[14] 朱殷, 陈浩, 王晓光. 激光功率对铝质量动态烧蚀影响的数值仿真[J]. 计算机仿真, 2015, 32(7): 7–9
ZHU Yin, CHEN Hao, WANG Xiaoguang. Dynamic simulation of mass-ablation process of Al[J]. Computer Simulation, 2015, 32(7): 7–9
[15] 孙岳, 黄海明, 高锁文. 激光烧蚀机理研究进展[J]. 失效分析与预防, 2008, 3(2): 58–63
SUN Yue, HUANG Haiming, GAO Suowen. Progress of research in laser ablation mechanism[J]. Failure Analysis and Prevention, 2008, 3(2): 58–63
[16] 李阳龙, 王伟平. 激光与聚合物的相互作用及其应用[J]. 光电技术应用, 2010, 25(2): 8–13, 60
LI Yanglong, WANG Weiping. Laser interaction with polymers and its applications[J]. Electro-Optic Technology Application, 2010, 25(2): 8–13, 60
[17] 毛强. 基于机载激光雷达智能测距输电线路树障的方法研究[J]. 湖北电力, 2017, 41(2): 20–23
MAO Qiang. Discuss on method to intelligent detection tree barrier along power transmission line based on helicopter LiDAR[J]. Hubei Electric Power, 2017, 41(2): 20–23
[18] 郑耀华. 架空输电线路走廊树障在线监测关键技术研究[J]. 机电信息, 2014(24): 150–151
[19] 王英军. 激光标准技术在电网异物清除方面应用研讨[J]. 中国标准化, 2017(16): 230–231
[20] 吴哲, 陈哲, 马岩, 等. 激光烧灼后的木材表面特征比较研究[J]. 西北林学院学报, 2018, 33(5): 189–194
WU Zhe, CHEN Zhe, MA Yan, et al. Comparative study on wood surface characteristics after laser burning[J]. Journal of Northwest Forestry University, 2018, 33(5): 189–194
[21] 侯祝强. 木材导热系数的研究[J]. 林业科学, 1992, 28(2): 153–160
HOU Zhuqiang. Studies on thermal conductivity of air-dried wood[J]. Scientia Silvae Sinicae, 1992, 28(2): 153–160
[22] 郝晓峰, 熊幸阳, 允帅, 等. 基于串并联理论木材导热系数的初探研究[J]. 林产工业, 2017, 44(8): 53–56
HAO Xiaofeng, XIONG Xingyang, YUN Shuai, et al. A preliminary study of wood conductivity coefficient based on series-parallel theory[J]. China Forest Products Industry, 2017, 44(8): 53–56
[23] 方广东. 无人机激光除异物装置研究[J]. 中国科技信息, 2019(21): 34–35
[24] 徐鑫, 方春华, 智李, 等. 连续激光作用下瓷质绝缘子温度和热应力分析[J]. 光电子·激光, 2021, 32(1): 78–87
XU Xin, FANG Chunhua, ZHI Li, et al. Analysis of temperature and thermal stress of porcelain insulator under continuous laser irradiation[J]. Journal of Optoelectronics·Laser, 2021, 32(1): 78–87
[25] 曾震武, 赵云芳, 袁博, 等. 基于ANSYS的激光反导热力效应研究[J]. 西安邮电学院学报, 2011, 16(增刊2): 7–10
ZENG Zhenwu, ZHAO Yunfang, YUAN Bo, et al. Research on thermal stress in laser anti-missile process based on ANSYS[J]. Journal of Xi'an University of Posts and Telecommunications, 2011, 16(S2): 7–10