中国电力 ›› 2016, Vol. 49 ›› Issue (11): 20-24.DOI: 10.11930/j.issn.1004-9649.2016.11.020.05

• 电网 • 上一篇    下一篇

±800 kV/6 250 A锡盟—泰州直流输电工程换流阀合成运行试验

才利存, 常忠廷, 李娟   

  1. 许继电气股份有限公司,河南 许昌 461000
  • 收稿日期:2016-09-08 出版日期:2016-11-10 发布日期:2016-12-09
  • 作者简介:才利存(1983—),男,辽宁锦州人,工程师,从事高压直流输电换流阀试验研究。E-mail: cailicun@163.com
  • 基金资助:
    河南省重大科技专项资助项目(141100210100)

Thyristor Valve Synthetic Operational Test of ±800 kV/6 250 A Ximeng-Taizhou UHVDC Project

CAI Licun, CHANG Zhongting, LI Juan   

  1. XJ Electric Co., Ltd, Xuchang 461000, China
  • Received:2016-09-08 Online:2016-11-10 Published:2016-12-09
  • Supported by:
    This work is supported by Major Science and Fechnology Project of Henan Province of China (No. 141100210100).

摘要: 为满足锡盟—泰州±800 kV/6 250 A换流阀运行试验的要求,建立了新型合成试验回路。介绍了新型合成试验回路的主要特点及解决的主要难题,结合实际工程研究合成试验回路主要设备的参数选取,并以此参数进行了±800 kV/6 250 A换流阀的运行试验。试验结果表明,所研究的合成试验回路完全可以满足±800 kV/6 250 A换流阀运行试验要求,验证了换流阀设计的合理性及可靠性。

关键词: 特高压, 直流输电, 运行试验, 合成回路, ±, 800 kV/6 250 A, 换流阀

Abstract: To meet the thyristor valve operation test requirements of the Ximeng-Taizhou ±800 kV/6 250 A project, a new-type synthetic test circuit is built. The main features of the test circuit and the principal problems that need to be addressed are introduced. The main equipment parameters of the synthetic circuit are investigated and used for the operation test of ±800 kV/6 250 A thyristor valve. The test result shows that the proposed synthetic test circuit can meet the operation test requirements of the ±800 kV/6 250 A thyristor valve, and the rationality and reliability of the thyristor valve design are verified.

Key words: UHV, DC transmission, operation test, synthetic circuit, ±, 800 kV/6 250 A, thyristor valve

中图分类号: