Research and Implementation on Soft Backup Technique for Thermal Power Generating Units

doi:10.11930/j.issn.10.11930.2015.10.38

Abstract

Abstract: Distributed control systems(DCS) are implemented in domestic thermal power plants to realize real-time control over the generation units. The main equipments may become inoperational due to DCS failures or improper isolation of on-line maintenance. In this case, generally it is not easy to handle the consequential problems and the accident usually will propagate, causing more severe damages to the power generating units. If there are two different independent control logics in the operation of main auxiliary equipments, of which one is the main control logic in operation and the other is the backup one on standby, the reliability of the auxiliary equipments will be no doubt greatly improved. Therefore, through the study and implementation on soft backup technique in the phase Ⅱ expansion project of Tianji Power Plant, the backup operation on six main draught fans is realized. The movable blades of the six main draught fans can be controlled by the analog control system. It can also be switched to the soft backup control mode. These two kinds of control methods are up and running in different controllers simultaneously, thus the reliability of the analog control system is enhanced.

Key words: thermal power generating unit, soft backup technique, research, implementation

CLC Number:

TK323

GUI Yishu, SHEN Congqi, XIA Jie, FEI Zhangsheng, WU Zhoujing. Research and Implementation on Soft Backup Technique for Thermal Power Generating Units[J]. journal1, 2015, 48(10): 38-42.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.10.11930.2015.10.38

https://www.electricpower.com.cn/EN/Y2015/V48/I10/38

References

[1] 王淼婺．浙江省火电机组自动化技术改造综述[J]．浙江电力，2003（3）：1－3．
WANG Miaowu. Overview of DCS technology for thermal power generating units in Zhejiang Province[J]. Zhejiang Electric Power, 2003(3): 1-3.
[2] 庞怀军． 600 MW燃煤机组DCS控制系统的设计与研究[D]．山东：山东大学，2005．
[3] 电力行业热工自动化标准化技术委员会．火电厂热控系统可靠性配置与事故预控[M]．北京：中国电力出版社，2010：26-28．
[4] 电力行业热工自动化标准化技术委员会．火力发电厂分散控制系统典型故障应急处理预案：艾默生Ovation系统[M]．北京：中国电力出版社，2012：125-128．
[5] 瞿德双． 660 MW超超临界Π型锅炉再热汽温623 ℃探索[J]．中国电力，2013，46（4）：28－31．
ZHAI Deshuang. Exploration of adopting 623 ℃ reheat steam temperature in 660-MW ultra-supercritical type Π boilers [J]. Electric Power, 2013, 46(4): 28-31.
[6] 崔振武，丁永君． DCS故障分析及技术措施[J]．自动化博览，2010（8）：62－64．
CUI Zhenwu, DING Yongjun. DCS failure analysis and technical measures [J]. Automation Panorama, 2010(8): 62-64.
[7] 刘复平，刘武林，朱晓星．火电机组 DCS系统失电故障安全隐患的调查及研究[J]．湖南电力，2007，27（6）：28－30．
LIU Fuping, LIU Wulin, ZHU Xiaoxing. Investigation and research of hidden danger caused by DCS power failure in power unit [J]. Hunan Electric Power, 2007, 27(6): 28-30.
[8] 章卫军，丁俊宏，叶国满，等．提高热控系统故障应急处理能力的研究[J]．浙江电力，2013（5）：37－40．
ZHANG Weijun, DING Junhong, YE Guoman, et al. Research on improving emergency handling capacity of thermal control system faults [J]. Zhejiang Electric Power, 2013(5): 37-40.

[1]	LIU Qing, ZHANG Lili, LI Jiangtao, ZHANG Chenglong, TAN Xiandong, ZHANG Kai, GUO Wei. Study on the Trend of China's Electricity Consumption during the “14 th Five Year Plan” [J]. Electric Power, 2022, 55(1): 214-219.
[2]	PENG Long, NING Jian, WANG Yi, LU Juanjuan, ZHANG Yong, LUO Yuchun. Design and Application of State Estimation Research Mode [J]. Electric Power, 2020, 53(7): 169-175.
[3]	PEI Zheyi, LIANG Zhifeng, LU Weihua, LI Xintong, WANG Zhenhao. Wide-Area Distributed Photovoltaic Power Generation Monitoring and Output Estimation [J]. Electric Power, 2020, 53(6): 87-96.
[4]	SUN Qiang, CHEN Qian, PAN Hangping, YONG Weizhen, CHEN Yang, WANG Jianxue. Comparative Analysis of Integrated Energy Service Implementation Paths in Typical Districts and Counties [J]. Electric Power, 2020, 53(12): 92-100,109.
[5]	TONG Sheng, LIU Le, WANG Pengfei. Coordinative Two-Stage Superheated Steam Temperature Linkage Control Based on Multivariable Generalized Predictive Control Algorithm [J]. Electric Power, 2020, 53(10): 215-223.
[6]	ZENG Ming, LIU Yingxin, WANG Xing, DONG Houqi, ZHANG Zhigang, HUO Xianxu. Research Status and Technical Route of Regional Integrated Energy System Simulation Platform [J]. Electric Power, 2019, 52(6): 87-93.
[7]	ZHANG Xiaodong, WANG Pengfei, LIU Le. Research and Application of Denitrification Optimal Control Based on Multi-Variable Generalized Predictive Control Algorithms [J]. Electric Power, 2019, 52(10): 178-184.
[8]	LU Cencen, WU Kuayu, WU Long, HAN Bing, SHEN Yijun, LU Haiqing. Study on a New-Type Phase Adaptive Power System Stabilizer and Its Simulation [J]. Electric Power, 2017, 50(9): 77-83.
[9]	ZHU Zhi. Research on the Implementation of Energy Saving and Ultra Low Emission Technique in W-Flame Boilers in Guizhou Province [J]. Electric Power, 2017, 50(8): 158-162.
[10]	WU Zhili, WANG Xuyang. Reflections on Implementation of the 13th Five-Year Distribution Network Planning [J]. Electric Power, 2017, 50(1): 25-29.
[11]	YANG Tao, HUANG Xiaoming, XUAN Jiazhuo. Analysis on Application of Active Power Transducer in Thermal Power Generating Units [J]. Electric Power, 2016, 49(6): 53-56.
[12]	XU Ruifeng, ZHAO Junying, ZHANG Donghai. Retrofit Design and Control of 600-MW Unit Heating System [J]. journal1, 2015, 48(7): 72-75.
[13]	LI Xin, TENG Ling, XIONG Hongzhang, GAO Qiang, LU Lifeng, WANG Yang. Research on On-Line Monitoring Scheme of Power Time Synchronization System [J]. Electric Power, 2015, 48(12): 12-15.
[14]	MA Hong-ming, ZHOU Nian-rong, XIAO Dan, TAN Xiang-yu, LI Jing-rui. Study on Partial Discharge Detection in GIS under AC Voltage and DC Voltage [J]. Electric Power, 2014, 47(3): 125-129.
[15]	GUI Yi-shu, SHEN Cong-qi, LYU Qiang. Study and Implementation of Comprehensive Thermal Protection Optimization in a Power Plant [J]. Electric Power, 2014, 47(12): 17-20.