Research on the Temperature Control Optimization Method to Reduce Gas Consumption of Gas Turbine

doi:10.11930/j.issn.1004-9649.201803097

Abstract

Abstract: The exhaust gas temperature of the gas turbine affects the efficiency of gas-steam combined cycle plant. The effective control of the exhaust gas temperature depends on the temperature control strategy of the gas turbine. This paper introduces the design principle and control method of temperature control for GE gas turbine. Regarding the calculation process of different types of temperature control curves, corresponding optimization methods are analyzed and explored. Based on the exhaust temperature and economic requirements, and then combined with the performance of existing equipment, the IGV temperature control line (TTRXGV), pressure ratio temperature control line (TTRXP), and power temperature control line (TTRXS) are optimized for temperature control strategies. After the optimization, the gas consumption of gas turbine is reduced by 0.000 5 m³/kWh after being converted into pure condensing condition. The economy is improved under the condition that the requirements are satisfied for secure and stable operation of the gas turbine, which demonstrate the effectiveness and reliability of the optimization method.

Key words: combined cycle, gas turbine, temperature control, control optimization

CLC Number:

TK471

FAN Jinji, ZHANG Chi. Research on the Temperature Control Optimization Method to Reduce Gas Consumption of Gas Turbine[J]. Electric Power, 2018, 51(12): 20-28.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.201803097

https://www.electricpower.com.cn/EN/Y2018/V51/I12/20

References 18

[1]	赵春,王培红. 燃气-蒸汽联合循环热经济学分析评价指标研究[J]. 中国电机工程学报, 2013, 33(23):44-50. ZHAO Chun, WANG Peihong. Thermal-economic analysis and evaluation index of gas-steam combined cycle[J]. Proceedings of the CSEE, 2013, 33(23):44-50.
[2]	黄素华, 苏保兴, 华宇东, 等. 燃气轮机NOx排放控制技术[J]. 中国电力, 2012, 45(6):100-103. HUANG Suhua, SU Baoxing, HUA Yudong,et al. NOx emission control technology in gas turbines[J]. Electric Power, 2012, 45(6):100-103.
[3]	富兆龙, 刘志勇, 张琨鹏, 等. PG9171E型燃气轮机温度控制分析[J]. 中国电力, 2015, 48(2):31-37. FU Zhaolong, LIU Zhiyong, ZHANG Yipeng,et al. Temperature control analysis of PG9171E gas turbine[J]. Electric Power, 2015, 48(2):31-37.
[4]	杨志鹏. GE 9F系列燃气轮机控制策略研究[D].上海:上海发电设备成套设计研究院,2017.
[5]	郑炯智, 张国强, 许彦平, 等. 顶底循环参数对燃气-蒸汽联合循环全工况性能影响分析[J]. 中国电机工程学报, 2016, 36(23):6418-6431, 6607. ZHENG Yuzhi, ZHANG Guoqiang, XU Yanping, et al. Analysis of the influence of top-bottom cycle parameters on the overall performance of gas-steam combined cycle[J]. Proceedings of the CSEE, 2016, 36(23):6418-6431, 6607.
[6]	蒋洪德,任静,李雪英,等. 重型燃气轮机现状与发展趋势[J]. 中国电机工程学报, 2014, 34(29):5096-5102. JIANG Hongde, REN Jing, LI Xueying,et al. Situation and development trend of heavy gas turbine[J]. Proceedings of the CSEE, 2014, 34(29):5096-5102.
[7]	黄素华, 荆迪, 庄劼, 等. 重型燃气轮机DLN2.0+系统燃烧调整实践[J]. 中国电力, 2018, 51(4):96-100. HUANG Suhua, JING Di, ZHUANG Jie, et al. Combustion tuning practice of DLN 2.0+ system for heavy duty gas turbine[J]. Electric Power, 2018, 51(4):96-100.
[8]	杨承,黄志峰,马晓茜. 联合循环热电联产机组变工况性能分析[J]. 中国电机工程学报, 2017, 37(12):3514-3524,3680. YANG Cheng,HUANG Zhifeng, MA Xiaoqian. Analysis of variable performance of combined cycle combined heat and power units[J]. Proceedings of the CSEE, 2017, 37(12):3514-3524,3680.
[9]	孙中伟. 某型燃机燃烧室的数值模拟[J]. 机械工程师, 2017(3):85-86. SUN Zhongwei. Numerical simulation of a combustor in a gas turbine[J]. Mechanical Engineer, 2017(3):85-86.
[10]	金培君,王欢欢. 9E燃气轮机透平框架冷却系统优化[J]. 华电技术, 2012, 34(S1):52-55
[11]	卢可. 新型燃气轮机再热联合循环发电关键技术研究[D].北京:华北电力大学(北京),2017.
[12]	张颖. GE9FA重型燃气轮机建模与控制研究[D].北京:华北电力大学,2014.
[13]	陈鹏飞. 航改燃气轮机燃烧室与烟气出口温度品质改善的数值研究[D].沈阳:沈阳工程学院,2016.
[14]	张文辉,李颖. 燃气轮机温度控制与性能试验[J]. 上海电力, 2006(1):36-38. ZHANG Wenhui, LI Ying. Temperature control and performance test of gas turbines[J]. Shanghai Electric Power, 2006(1):36-38.
[15]	焦树建, 孙守林, 张艳春, 等. 燃气-蒸汽联合循环[M].北京:机械工业出版社, 2000.
[16]	章褆,任鑫. S109FA联合循环燃气轮机温度控制分析[J]. 燃气轮机技术, 2010, 23(1):34-38. ZHANG Yi,REN Xin. Temperature control analysis of S109FA combined cycle gas turbine[J]. Gas Turbine Technology, 2010, 23(1):34-38.
[17]	杨承, 黄志峰, 马晓茜. 联合循环机组中燃气轮机部件劣化对功率效率的敏感性分析[J]. 中国电机工程学报, 2015, 35(22):5803-5810. YANG Cheng, HUANG Zhifeng, MA Xiaoqian. Sensitivity analysis of power unit efficiency degradation of gas turbine components in combined cycle units[J]. Proceedings of the CSEE, 2015, 35(22):5803-5810.
[18]	蔡志杰. 基于9F级燃气-蒸汽联合循环机组经济运行的优化设计[J]. 中国电业(技术版), 2013(12):50-53. CAI Zhijie. Optimized design of economic optimization design of steam combined cycle units based on the 9F gas for the economic operation[J]. China Electric Power(Technology Edition), 2013(12):50-53.