[1] 李明,周志平,付晨鹏,等.超临界600 MW汽轮机高压调节汽门优化及经济性分析[J].汽轮机技术,2010,52(2):144-149. LI Ming, ZHOU Zhi-ping, FU Chen-peng, et al . 600 MW supercritical steam turbine high pressure control valve optimization and economic analysis[J]. Turbine Technology, 2010, 52(2):144-149. [2] 王学栋,宫革,陈方高,等.超临界660 MW汽轮机调门运行方式研究与优化[J].中国电力,2010,43(9):57-62. WANG Xue-dong, GONG Ge, CHEN Fang-gao, et al . Research and optimization of governing valve operation mode of 660 MW supercritical steam turbine[J].Electric Power,2010,43(9):57-62. [3] 范鑫,秦建明,付晨鹏,等.超临界600 MW汽轮机滑压优化运行的试验研究[J].汽轮机技术,2011,53(2):143-150. FAN Xin, QIN Jian-ming, FU Chen-peng, et al . Test study on optimization of sliding pressure operation for supercritical 600 MW steam turbine[J].Turbine Technology,2011,53(2):143-150. [4] 范鑫,秦建明,李明,等.超临界600 MW汽轮机运行方式的优化研究[J].动力工程学报,2012,32(5):356-361. FAN Xin, QIN Jian-ming, LI Ming, et al . Study on operation mode optimization for a 600 MW supercritical steam turbine[J].Journal of Chinese Society of Power Engineering, 2012,32(5):356-361. [5] 田丰,邓少翔,韩景复,等.国产600 MW汽轮机单顺阀滑压运行特性试验研究[J].汽轮机技术,2009,51(2):144-147. TIAN Feng, DENG Shao-xiang, HAN Jing-fu, et al . Experimental study on sliding pressure operation characteristics of single valve and sequence valve of a domestic made 600 MW turbine[J].Turbine Technology, 2009,51(2):144-147. [6] 孙永平,童小忠,樊印龙. 600 MW机组滑压运行方式优化的试验研究[J].热力发电,2007,36(8):66-68. SUN Yong-ping, TONG Xiao-zhong, FAN Yin-long. Test study on optimization of sliding pressure operation mode for 600 MW units[J]. Thermal Power Generation,2007,36(8):66-68. [7] ASME PTC6—2004, Steam turbines performance test codes[S]. New York, US:ASME,2004:7-86. [8] 中国国家标准化管理委员会.GB/T 8117.2—2008 汽轮机热力性能验收试验规程(第2部分)[S].北京:中国标准出版社,2008:8-44. [9] 郑体宽.热力发电厂[M].北京:中国电力出版社,2003:24-33. [10] 王宁玲,张勇,杨勇平,等.600 MW火电机组节能降耗分析与优化措施[J].中国电力,2009,42(9):55-58. WANG Ning-ling, ZHANG Yong, YANG Yong-ping, et al . Analysis and optimized measures for the energy conservation and consumption reduction of 600 MW thermal power units[J].Electric Power,2009,42(9):55-58. [11] 林万超.火电厂热系统节能理论[M].西安:西安交通大学出版社,1994. [12] 周兰欣,华敏,王统彬,等.主蒸汽压力与热耗修正曲线的变工况计算法[J].热能动力工程,2011,26(3):351-353. ZHOU Lan-xin, HUA Min, WANG Tong-bin, et al . Method for calculating main steam pressure and heat rate correction curves under off-design operating conditions[J]. Journal of Engineering for Thermal Energy and Power,2011,26(3):351-353. [13] 李秀云,严俊杰,林万超.滑压机组背压变化对经济性影响的两种新计算方法[J]. 中国电机工程学报,1999,19(9):22-26. LI Xiu-yun, YAN Jun-jie, LIN Wan-chao. Quantitative study on the economy of exhaust pressure change for the initial pressure slide unit[J]. Proceedings of the CSEE, 1999,19(9): 22-26. |