The Numerical Analysis on Temperature Rise Multiphysics Coupling of GIS Disconnector Contacts

doi:10.11930/j.issn.1004-9649.201612013

Abstract

Abstract: The overheat fault of gas insulated switch-gear (GIS) disconnector contacts severely damages the reliable operation of equipment. In order to monitor the temperature rise and the overheat fault of GIS disconnector contacts, this paper establishes a 3D numerical coupled multi-physics model of eddy current-fluid-temperature of GIS with contacts. The resistance of contactor is replaced by a conductor with variable resistivity, and the current density and power loss of GIS disconnector are calculated through analyzing the electromagnetic field. The temperature of conductor and tank are calculated by using the finite element model whose heat source is power loss. The inversion law and influence factors of the temperature rise of GIS disconnector contacts are studied based on the coupled multi-physics model. The results show that the relationship between the contact of phase A, B and the temperature rise of tank is 1:0.215, and the relationship between the contact C and the temperature rise of tank is 1:0.165. The research results can provide theoretical basis and technical support for monitoring the temperature rise of GIS.

Key words: GIS, disconnector, coupled multi-physics, finite element, temperature rise

CLC Number:

TM561

ZHOU Tian, LI Zipin, SHEN Quanyu, SHU Naiqiu, WU Yuanchao. The Numerical Analysis on Temperature Rise Multiphysics Coupling of GIS Disconnector Contacts[J]. Electric Power, 2018, 51(2): 13-20.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.201612013

https://www.electricpower.com.cn/EN/Y2018/V51/I2/13

References

[1] 罗学琛. 六氟化硫气体绝缘全封闭组合电器(GIS)[M]. 北京: 中国电力出版社, 1999: 83-88.
[2] 王静君, 黄瑜珑. 一起500 kV GIS隔离开关绝缘闪络的事故分析[J]. 高压电器, 2013, 49(9): 119-122.
WANG Jingjun, HUANG Yulong. Analysis on an insulation breakdown accident of 500 kV GIS disconnector[J]. High Voltage Apparatus, 2013, 49(9): 119-122.
[3] BENATO R, DUGHIERO F. Solution of coupled electromagnetic and thermal problems in gas-insulated transmission lines[J]. IEEE Transactions on Magnetics, 2003, 39(3): 1741-1744.
[4] LI Y, HO S L, WANG N. Calculations of electro-magnetic field and thermal problem in an isolated phase bus by using FE model[C]//IEEE International Conference on Power System Technology, New Delhi, India, 2008.
[5] 宋帆, 申春红, 林莘, 等. 800 kV GIS隔离开关磁场—温度场计算与分析[J]. 高电压技术, 2008, 34(7): 1383-1388.
SONG Fan, SHEN Chunhong, LIN Xin, et al. Calculation and analysis on magneto-thermal fields of 800 kV GIS disconnector[J]. High Voltage Engineering, 2008, 34(7): 1383-1388.
[6] YOON J H, AHN H S, CHOI J, et al. An estimation technology of temperature rise in GIS bus bar using three-dimensional coupled-field multi-physics[C]//IEEE International Symposium on Electrical Insulation, Van-couver, Canada, 2008.
[7] KIM J K, LEE J Y, WEE S B, et al. A novel coupled magneto-thermal-flow analysis for temperature rise prediction of power apparatus[C]//International Conference on Electrical Machines and Systems, Wuhan, China, 2008.
[8] KIM S W, KIM H H, HAHN S C, et al. Coupled finite-element-analytic technique for prediction of temperature rise in power apparatus[J]. IEEE Transactions on Magnetics, 2002, 38(2): 921-924.
[9] KIM J K, HAHN S C, PARK K Y, et al. Temperature rise prediction of EHV GIS bus bar by coupled magneto-thermal finite element method[J]. IEEE Transactions on Magnetics, 2005, 41(5): 1636-1639.
[10] PAULKE J, WEICHERT H, STEINHAEUSER P. Thermal simulation of switchgear[J]. IEEE Transactions on Components and Packaging Technologies, 2002, 25(3): 434-439.
[11] GUAN X, SHU N, KANG B, et al. Multiphysics analysis of plug-in connector under steady and short circuit conditions[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2015, 5(3): 320-327.
[12] JANG S M, CHO S K, LEE S H, et al. Thermal analysis of induction heating roll with heat pipes[J]. IEEE Transactions on Magnetics, 2003, 39(5): 3244-3246.
[13] ZHANG Y J, RUAN J J, HUANG T, et al. Calculations of temperature rise in air-cooled induction motors through 3-D coupled electromagnetic fluid-dynamical and thermal finite-element analysis[J]. IEEE Transactions on Magnetics, 2012, 48(2): 1047-1050.
[14] KIM H K, JUNG J K, PARK K Y, et al. Efficient technique for 3-D finite element analysis of skin effect in current-carrying conductors[J]. IEEE Transactions on Magnetics, 2004, 40(2): 1326-1329.
[15] LABRIDIS D, HATZIATHANASSIOU V. Finite element computation of field, forces and inductances in underground SF₆ insulated cables using a coupled magneto-thermal formulation[J]. IEEE Transactions on Magnetics, 1994, 30(4): 1407-1415.
[16] 杨世铭, 陶文铨. 传热学[M]. 4版. 北京: 高等教育出版社, 2006: 202-206.
[17] 贾志杰, 张斌. GIS回路电阻超标缺陷定位分析[J]. 中国电力, 2015, 48(5): 46-50.
JIA Zhijie, ZHANG Bin. Location analysis of GIS circuit resistance defection[J]. Electric Power, 2015, 48(5): 46-50.
[18] 曾雄杰, 刘旭明, 黄文武, 等. 超声波局放监测在GIS耐压局放试验中的应用[J]. 中国电力, 2014, 47(8): 13-20.
ZENG Xiongjie, LIU Xuming, HUANG Wenwu, et al. Application of ultrasonic-based PD monitoring system in the test of withstanding voltage and PD[J]. Electric Power, 2014, 47(8): 13-20.
[19] 陈昊, 郭湘奇, 田涛, 等. 隔离开关闭锁回路电子档案系统的构建及应用[J]. 中国电力, 2012, 45(7): 20-23.
CHEN Hao, GUO Xiangqi, TIAN Tao, et al. Establishment and implementation of electronic archives for block circuit of isolation switches[J]. Electric Power, 2012, 45(7): 20-23.