中国电力 ›› 2014, Vol. 47 ›› Issue (8): 62-66.DOI: 10.11930/j.issn.1004-9649.2014.8.62.4

• 电网 • 上一篇    下一篇

考虑电容器电压特性的配电网无功补偿研究

李珂1, 钱晓俊2, 邰能灵1, 胡彪1, 彭江2   

  1. 1. 上海交通大学电子信息与电气工程学院,上海市 闵行区 200240;
    2. 浙江省浦江供电公司,浙江省 浦江市 322200
  • 收稿日期:2014-05-08 出版日期:2014-08-18 发布日期:2015-12-10
  • 作者简介:李珂(1989—),男,浙江东阳人,博士研究生,从事电力系统优化与微网能量管理系统的研究。E-mail: like1989@sjtu.edu.cn

Reactive Power Planning in Distribution System Based on Capacitor’s Voltage-Dependent Characteristics

LI Ke, QIAN Xiao-jun, TAI Neng-ling, HU Biao, PENG Jiang   

  1. 1. Department of Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240, China;
    2. Pujiang Electric Power Company, Pujiang 322200, China
  • Received:2014-05-08 Online:2014-08-18 Published:2015-12-10

摘要: 因电容器的补偿容量和其接入点的电压水平有着密切关系,所以在潮流分析的基础上,提出一种考虑电容器电压特性,利用节点无功裕度排序法找到系统无功源最佳配置点进行无功补偿的方法。结合某地区配电系统的实际应用,采用该方法对其无功补偿情况进行了分析,仿真结果与实际测试验证了该方法的有效性。

关键词: 电力系统, 配电网, 无功补偿, 补偿电容器, 电压特性, 节点, 无功裕度, 补偿方法, 排序法

Abstract: The actual compensation of capacitor capacity has a very close relationship with the voltage level of the access points. Therefore, based on the power flow analysis, a compensation method, which considers the capacitor’s voltage characteristics, is proposed to use the sorting method for node reactive power margins to find the best configuration for reactive power source access. The method is applied to the distribution system of a region for analyzing the reactive compensation and the results of simulation and actual testing proves the method’s high efficiency.

Key words: power system, distribution system, reactive power compensation, capacitor, voltage-dependent characteristics, node, reactive power margin, compensation method, sorting method

中图分类号: