状态估计研究模式设计及应用

doi:10.11930/j.issn.1004-9649.201809119

中国电力 ›› 2020, Vol. 53 ›› Issue (7): 169-175.DOI: 10.11930/j.issn.1004-9649.201809119

• 智能电网状态估计及其应急仿真专栏 • 上一篇下一篇

状态估计研究模式设计及应用

彭龙^1,2, 宁剑³, 王毅^1,2, 陆娟娟^1,2, 张勇³, 罗玉春^1,2

1. 南瑞集团（国网电力科学研究院）有限公司，江苏南京 210061;
2. 国电南瑞科技股份有限公司，江苏南京 210061;
3. 国家电网公司华北分部，北京 100053

收稿日期:2018-10-16 修回日期:2019-04-25 发布日期:2020-07-05
作者简介:彭龙(1988—)，男，工程师，通信作者，从事电网调度自动化系统分析与控制研究，E-mail: penglong@sgcc.com.cn;宁剑(1986—)，男，硕士，高级工程师，从事调度自动化技术研究及运行管理，E-mail: ning.jian@nc.sgcc.com.cn;王毅(1980—)，男，硕士，高级工程师，从事电网调度自动化分析与控制研究，E-mail: wongyee@outlook.com

Design and Application of State Estimation Research Mode

PENG Long^1,2, NING Jian³, WANG Yi^1,2, LU Juanjuan^1,2, ZHANG Yong³, LUO Yuchun^1,2

1. NARI Group Corporation (State Grid Electric Power Research Institute), Nanjing 210061, China;
2. NARI Technology Co., Ltd., Nanjing 210061, China;
3. North China Branch of State Grid Corporation of China, Beijing 100053, China

Received:2018-10-16 Revised:2019-04-25 Published:2020-07-05

摘要/Abstract

摘要： 由于实际电力系统运行工况复杂，状态估计无法避免出现不收敛的情况，反演时难以再现断面结果，在对量测方式和参数进行调整时会造成合格率指标波动，同时也会影响实时网络分析应用系统的稳定运行。分析现有状态估计运行中存在的问题及应用需求，设计实现了状态估计研究模式分析平台。首先，通过断面管理和读取功能保存状态估计计算所需的全部信息；然后，通过研究模式反演，实现断面读取、分析调试计算；最后，通过分析对比功能，为参数和量测调整提供指标参考。上述工作使得状态估计计算结果完整再现，并且分析过程独立于实时状态估计因而不影响实时合格率，自动化专业人员可以依据分析对比功能提供的指标对量测和参数问题有目标地进行分析。通过华北分中心的实际使用，证明平台功能可满足专业人员对状态估计的分析调试需求。

关键词: 调度控制系统, 状态估计, 量测错误, 发散, 研究模式

Abstract: Because of the complexity of actual operation conditions of power systems, non-convergence is hard to be avoided in state estimation and section results are difficult to be reproduced in inversion, and the adjustment of measurement and parameters will lead to the fluctuation of the eligibility rate and affect the stable operation of the real-time network analysis application system. Based on an analysis of the existing problems and application requirements in operation of state estimation, a research mode analysis platform for state estimation is designed and implemented. Firstly, all the information needed for state estimation is saved through section management and reading function; secondly, section reading, analysis and debugging calculation are realized through researching mode inversion; finally, the indicator reference is provided for parameters and measurement adjustment through comparison function. The results of state estimation are completely reproduced, and the analysis process is independent of the real-time state estimation and thus does not affect the real-time eligibility rate. The automation professionals can analyze the measurement and parameter problems purposefully according to the indicators provided by the comparison function. Through the actual application in North China Branch Center of SGCC, it is proved that the platform's functions can meet the needs of professionals for analysis and debugging of state estimation. The analysis basis is provided through index comparison. Through the actual use of North China Branch Center, it is proved that the platform function can meet the needs of professional personnel for analysis and debugging of state estimation.

Key words: dispatching and control system, state estimation, measurement error, diverge, research mode

彭龙, 宁剑, 王毅, 陆娟娟, 张勇, 罗玉春. 状态估计研究模式设计及应用[J]. 中国电力, 2020, 53(7): 169-175.

PENG Long, NING Jian, WANG Yi, LU Juanjuan, ZHANG Yong, LUO Yuchun. Design and Application of State Estimation Research Mode[J]. Electric Power, 2020, 53(7): 169-175.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.201809119

https://www.electricpower.com.cn/CN/Y2020/V53/I7/169

参考文献

[1] 卢强, 何光宇, 陈颖. 智能电力系统与智能电网[M]. 北京: 清华大学出版社, 2013.
[2] WU F F, LIU W H E. Detection of topology errors by state estimation (power systems)[J]. IEEE Transactions on Power Systems, 1989, 4(1): 176-183.
[3] ALSAC O, VEMPATI N, STOTT B, et al. Generalized state estimation[J]. IEEE Transactions on Power Systems, 1998, 13(3): 1069-1075.
[4] ABUR A, KIM H. Identifying the unknown circuit breaker statuses in power network[J]. IEEE Transactions on Power Systems, 1995, 10(4): 2029-2037.
[5] MILI L, STEENO G, DOBRACA F, et al. A robust estimation method for topology error identification[J]. IEEE Transactions on Power Systems, 1999, 14(4): 1469-1476.
[6] SINGH N, OESCH F. Practical experience with rule-based on-line topology error detection[J]. IEEE Transactions on Power Systems, 1994, 9(2): 841-847.
[7] 周苏荃, 柳焯. 新息图法拓扑错误辨识[J]. 电力系统自动化, 2000, 24(4): 23-27
ZHOU Suquan, LIU Zhuo. An innovation graph approach to topology error identification[J]. Automation of Electric Power Systems, 2000, 24(4): 23-27
[8] 周苏荃, 柳焯. 新息图的智能特征[J]. 电力系统自动化, 2000, 24(13): 15-18, 70
ZHOU Suquan, LIU Zhuo. The intelligent characteristics of the innovation graph[J]. Automation of Electric Power Systems, 2000, 24(13): 15-18, 70
[9] 周苏荃, 李昌, 柳焯. 加权新息图法识别小潮流支路拓扑错误[J]. 电力系统自动化, 2001, 25(5): 27-30
ZHOU Suquan, LI Chang, LIU Zhuo. A weighted innovation graph approach for identifying topology errors on branches with small load flow[J]. Automation of Electric Power Systems, 2001, 25(5): 27-30
[10] 周苏荃, 柳焯. 新息图法识别多重网络结构动态变化[J]. 中国电机工程学报, 2001, 21(10): 67-72
ZHOU Suquan, LIU Zhuo. Identification of multiple dynamic network structure changes by the innovation graph approach[J]. Proceedings of the CSEE, 2001, 21(10): 67-72
[11] 周苏荃, 柳焯. 负荷突变与拓扑错误及坏数据三者交叠情况下的识别问题[J]. 中国电机工程学报, 2002, 22(6): 6-10
ZHOU Suquan, LIU Zhuo. The identification of three simultaneous anormalies of sudden load change and topology error and bad data[J]. Proceedings of the CSEE, 2002, 22(6): 6-10
[12] 张艳军, 葛延峰, 高凯, 等. 基于广域测量系统的新息图辨识不良数据方法[J]. 电力系统自动化, 2010, 34(23): 25-29
ZHANG Yanjun, GE Yanfeng, GAO Kai, et al. Bad data identification based on innovation graph technique in wide area measurement system[J]. Automation of Electric Power Systems, 2010, 34(23): 25-29
[13] 毛志强, 蔡中勤, 周苏荃, 等. 基于新息图法的电力系统负荷突变辨识[J]. 电力系统自动化, 2011, 35(12): 37-41
MAO Zhiqiang, CAI Zhongqin, ZHOU Suquan, et al. Identification of sudden load changes based on innovation graph approach[J]. Automation of Electric Power Systems, 2011, 35(12): 37-41
[14] 孙宏斌, 高峰, 张伯明, 等. 电力系统最小信息损失状态估计的信息学原理[J]. 中国电机工程学报, 2005, 25(6): 11-16
SUN Hongbin, GAO Feng, ZHANG Boming, et al. Information principle for state estimation in power systems based on minimum information loss[J]. Proceedings of the CSEE, 2005, 25(6): 11-16
[15] 孙宏斌, 高峰, 张伯明, 等. 最小信息损失状态估计中潮流和拓扑统一估计的通用理论[J]. 中国电机工程学报, 2005, 25(17): 1-4
SUN Hongbin, GAO Feng, ZHANG Boming, et al. Minimum information loss based state estimation: general theory for unified estimation of power flow and topology[J]. Proceedings of the CSEE, 2005, 25(17): 1-4
[16] 孙宏斌, 高峰, 张伯明, 等. 最小信息损失状态估计在拓扑错误辨识中的应用[J]. 中国电机工程学报, 2005, 25(18): 1-5
SUN Hongbin, GAO Feng, ZHANG Boming, et al. Application of minimum information loss based state estimation to topology error identification[J]. Proceedings of the CSEE, 2005, 25(18): 1-5
[17] 陈芳, 韩学山, 康凯. 一种识别闭合开关元件信息错误的状态估计方法[J]. 电力系统自动化, 2011, 35(1): 50-54
CHEN Fang, HAN Xueshan, KANG Kai. State estimation algorithm with identification of closed breakers information[J]. Automation of Electric Power Systems, 2011, 35(1): 50-54
[18] 卢志刚, 程慧琳, 张静, 等. 基于改进离散BCC算法的电网开关信息错误辨识[J]. 电力系统自动化, 2012, 36(12): 55-60
LU Zhigang, CHENG Huilin, ZHANG Jing, et al. A method for switch information error identification based on improved discrete bacterial colony chemotaxis algorithm[J]. Automation of Electric Power Systems, 2012, 36(12): 55-60
[19] 孙宏斌, 张伯明, 相年德. 实时网络分析中开关电流和功率的计算[J]. 电力系统自动化, 1996, 20(5): 25-28, 52
SUN Hongbin, ZHANG Boming, XIANG Niande. An algorithm to calculate current and power flowthrough circuit breaker in realtime network analysis[J]. Automation of Electric Power Systems, 1996, 20(5): 25-28, 52
[20] 宁剑, 王毅, 邹德虎, 等. 状态估计智能分析功能设计与应用[J]. 中国电力, 2015, 48(2): 85-89
NING Jian, WANG Yi, ZOU Dehu, et al. Design and application of state estimation intelligent analysis[J]. Electric Power, 2015, 48(2): 85-89

状态估计研究模式设计及应用

Design and Application of State Estimation Research Mode

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	贺全鹏, 刘苇, 杨维永, 魏兴慎, 王琦. 针对负荷重分配攻击的移动目标防御策略[J]. 中国电力, 2024, 57(9): 44-52.
[2]	张玉敏, 张涌琛, 叶平峰, 吉兴全, 石春友, 蔡富东, 李一宸. 基于集合经验模态分解的增强核岭回归配电系统状态估计[J]. 中国电力, 2024, 57(9): 156-168.
[3]	朱沐雨, 马宏忠, 郭鹏宇, 宣文婧. 典型调峰/调频工况下储能电池组荷电状态估计[J]. 中国电力, 2024, 57(6): 18-26.
[4]	赵化时, 黄耀辉, 宋智强, 许建中, 郑可欣, 梁康康. 含LCC/MMC交直流混联系统的状态估计及不良数据检测[J]. 中国电力, 2024, 57(11): 62-69.
[5]	马光, 朱文, 顾慧杰, 赵化时, 何锡祺, 陈世杰. 基于加权最小绝对值状态估计的有源配电网拓扑辨识方法[J]. 中国电力, 2024, 57(1): 167-174.
[6]	张媛, 夏向阳, 岳家辉, 刘代飞, 王明琦. 基于电池簇放电电量的电池堆不一致性在线监测方法[J]. 中国电力, 2023, 56(7): 207-215,227.
[7]	郭梦芳, 杜翔, 王飞. 考虑边界等式约束的电-气-热综合能源系统鲁棒状态估计方法[J]. 中国电力, 2023, 56(6): 101-106.
[8]	袁兆祥, 肖智宏, 王晶, 于燕玲, 黄炎, 高星乐. 考虑多时刻和压缩候选集合的配电网最小化采集优化方法[J]. 中国电力, 2023, 56(12): 20-30.
[9]	田钧祥, 陈铁, 陈彬. 基于改进自适应UKF算法的中压配电网鲁棒动态状态估计方法[J]. 中国电力, 2023, 56(11): 128-133.
[10]	刘文军, 欧名勇, 夏向阳, 李湘华, 岳家辉. 基于欧姆内阻压降的电池簇不一致性在线监测方法研究[J]. 中国电力, 2022, 55(8): 87-95.
[11]	马思棋, 王忠. 基于贝叶斯优化弹性网络回归的谐波状态估计方法[J]. 中国电力, 2022, 55(8): 104-112.
[12]	李峰, 彭慧敏, 袁虎玲, 万芳茹, 黄天罡, 李威. UPFC在线运行优化辅助决策应用功能设计[J]. 中国电力, 2021, 54(7): 76-82.
[13]	赵静波, 卫志农, 王晗雯, 解兵, 黄梅, 孟侠. 不确定量测下发电机动态状态估计性能分析[J]. 中国电力, 2020, 53(7): 149-159.
[14]	罗玉春, 王毅, 闪鑫, 戴则梅, 张磊. 超大规模电网快速状态估计的实现方法[J]. 中国电力, 2020, 53(7): 132-140.
[15]	王顺江, 孙乔, 侯验秋, 林济铿. 基于状态估计及综合可疑度的参数辨识和修正方法[J]. 中国电力, 2020, 53(2): 36-42.

模态框（Modal）标题

状态估计研究模式设计及应用

Design and Application of State Estimation Research Mode

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics