660 MW超临界燃煤机组变负荷过程动态特性的仿真研究

doi:10.11930/j.issn.1004-9649.201903088

中国电力 ›› 2019, Vol. 52 ›› Issue (5): 13-20.DOI: 10.11930/j.issn.1004-9649.201903088

• 智能发电关键技术专栏 • 上一篇下一篇

660 MW超临界燃煤机组变负荷过程动态特性的仿真研究

赵永亮¹, 刁保圣², 韩翔², 刘明¹, 王珠¹, 种道彤¹, 严俊杰¹

1. 西安交通大学动力工程多相流国家重点实验室, 陕西西安 710049;
2. 国家能源集团宿迁发电有限公司, 江苏宿迁 223800

收稿日期:2019-03-24 修回日期:2019-04-22 出版日期:2019-05-05 发布日期:2019-05-14
作者简介:赵永亮(1991-),男,博士研究生,从事燃煤机组瞬态过程中运行灵活安全性仿真研究,E-mail:yl.zhao@stu.xjtu.edu.cn;刁保圣(1972-),男,高级工程师,从事火力发电基建、生产运行、智慧煤电企业建设以及火力发电企业管理等研究,E-mail:baosheng.diao@chnenergy.com.cn;韩翔(1975-),男,硕士,高级工程师,从事热工自动化及工程管理研究,E-mail:34891290@qq.com;刘明(1985-),男,通信作者,博士,副教授,从事热工控制优化、智慧电站、火电厂节能和超临界二氧化碳新型动力循环等研究,E-mail:ming.liu@mail.xjtu.edu.cn
基金资助:
国家重点研发计划资助项目（2017YFB0602101）。

Simulation Study on the Dynamic Characteristics of a 660 MW Supercritical Coal-Fired Power Unit During AGC Processes

ZHAO Yongliang¹, DIAO Baosheng², HAN Xiang², LIU Ming¹, WANG Zhu¹, CHONG Daotong¹, YAN Junjie¹

1. State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China;
2. National Energy Group Suqian Power Generation Co., Ltd., Suqian 223800, China

Received:2019-03-24 Revised:2019-04-22 Online:2019-05-05 Published:2019-05-14
Supported by:
This work is supported by National Key Research and Development Program of China (No.2017YFB0602101).

摘要/Abstract

摘要： 燃煤机组变负荷速率的提升是电网AGC（automatic generation control）调节过程灵活性的重要评价指标。建立了660 MW超临界一次再热燃煤机组的动态仿真模型，并嵌入了详细热工控制模型，获得了75%~100%THA范围内不同变负荷速率下的机组主要热力参数的动态变化规律。利用工质最大温度偏差和平均标准煤耗率差值为评价指标，对燃煤机组AGC变负荷过程的安全性和经济性开展了分析。研究结果表明：随着变负荷速率的提高，输出功率、主汽温度和再热蒸汽温度波动越来越剧烈，水冷壁出口、屏式过热器出口、水平低温再热器入口和垂直低温再热器出口的工质最大温度偏差逐渐增大，最大值分别为24.7、29.1、26.1和41.3 ℃。随着升负荷速率的提高，平均标准煤耗率差值逐渐减小，变化范围为2.35~2.53 g/（kW·h），随着降负荷速率的提高，平均标准煤耗率差值的绝对值逐渐减小，变化范围为-2.64~-2.50 g/（kW·h）。

关键词: 智能发电, 运行灵活性, 自动发电控制, 燃煤机组, 标准煤耗率, 动态仿真

Abstract: Improvement of loading change rate in coal-fired power units is one of the key evaluation index of flexibilities in the power system during automatic generation control (AGC) regulating processes. In this study, the dynamic simulation models of a 660 MW supercritical reheat coal-fired power unit were developed with the detailed control systems embedded. Then, the dynamic characteristics of main thermal parameters at different loading change rate ranging from 75% to 100% THA were obtained. Taking the maximal fluid temperature deviation and average standard coal consumption rate deviation as the evaluation indexes, the security and economy of the coal-fired power units during AGC load change processes were analyzed. The results reveal that with the increase of loading change rate, the output power, main steam temperature and reheat steam temperature fluctuate more drastically. Besides, the maximal fluid temperature deviations increase gradually at water wall outlet, platen superheater outlet, horizontal low-temperature reheater inlet, and vertical low-temperature reheater outlet, which are 24.7, 29.1, 26.1, 41.3℃, respectively. The average standard coal consumption rate deviation decreases when the loading up rate increases, ranging from 2.35 to 2.53 g/(kW·h). On the other hand, the absolute value of average standard coal consumption rate deviation decreases when loading down rate goes up, ranging from -2.64 to -2.50 g/(kW·h).

Key words: intelligent generation, operational flexibility, automatic generation control, coal-fired power unit, standard coal consumption rate, dynamic simulation

中图分类号:

TK22

赵永亮, 刁保圣, 韩翔, 刘明, 王珠, 种道彤, 严俊杰. 660 MW超临界燃煤机组变负荷过程动态特性的仿真研究[J]. 中国电力, 2019, 52(5): 13-20.

ZHAO Yongliang, DIAO Baosheng, HAN Xiang, LIU Ming, WANG Zhu, CHONG Daotong, YAN Junjie. Simulation Study on the Dynamic Characteristics of a 660 MW Supercritical Coal-Fired Power Unit During AGC Processes[J]. Electric Power, 2019, 52(5): 13-20.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.201903088

https://www.electricpower.com.cn/CN/Y2019/V52/I5/13

参考文献 20

[1]	ZAPPA W, JUNGINGER M, VAN DEN BROEK M. Is a 100% renewable European power system feasible by 2050?[J]. Applied Energy, 2019, 233-234:1027-1050.
[2]	LU X, MCELROY M B, PENG W, et al. Challenges faced by china compared with the us in developing wind power[J]. Nature energy, 2016, 1:16061.
[3]	MA J, SILVA V, BELHOMME R, et al. Evaluating and planning flexibility in sustainable power systems[J]. IEEE Transactions on Sustainable Energy, 2013, 4(1):200-209.
[4]	LUND P D, LINDGREN J, MIKKOLA J, et al. Review of energy system flexibility measures to enable high levels of variable renewable electricity[J]. Renewable and Sustainable Energy Reviews, 2015, 45:785-807.
[5]	HAN X, CHEN X, MCELROY M B, et al. Modeling formulation and validation for accelerated simulation and flexibility assessment on large scale power systems under higher renewable penetrations[J]. Applied Energy, 2019, 237:145-154.
[6]	LUO X, WANG J H, DOONER M, et al. Overview of current development in electrical energy storage technologies and the application potential in power system operation[J]. Applied Energy, 2015, 137:511-536.
[7]	GONZALEZ-SALAZAR MA, KIRSTEN T, PRCHLIK L. Review of the operational flexibility and emissions of gas-and coal-fired power plants in a future with growing renewables[J]. Renewable and Sustainable Energy Reviews, 2018, 82:1497-1513.
[8]	RICHTER M, OELJEKLAUS G, GÖRNER K. Improving the load flexibility of coal-fired power plants by the integration of a thermal energy storage[J]. Applied Energy, 2019, 236:607-621.
[9]	ZHAO Y L, LIU M, WANG C Y, et al. Increasing operational flexibility of supercritical coal-fired power plants by regulating thermal system configuration during transient processes[J]. Applied Energy, 2018, 228:2375-2386.
[10]	ZHAO Y L, WANG C Y, LIU M, et al. Improving operational flexibility by regulating extraction steam of high-pressure heaters on a 660 MW supercritical coal-fired power plant:A dynamic simulation[J]. Applied Energy, 2018, 212:1295-1309.
[11]	LONG D T, WANG W, YAO C, et al. An experiment-based model of condensate throttling and its utilization in load control of 1000 MW power units[J]. Energy, 2017, 133:941-954.
[12]	WANG C Y, LIU M, ZHAO Y L, et al. Dynamic modeling and operation optimization for the cold end system of thermal power plants during transient processes[J]. Energy, 2018, 145:734-746.
[13]	GARBRECHT O, BIEBER M, KNEER R. Increasing fossil power plant flexibility by integrating molten-salt thermal storage[J]. Energy, 2017, 118:876-883.
[14]	WANG C Y, LIU M, LI B X, et al. Thermodynamic analysis on the transient cycling of coal-fired power plants:Simulation study of a 660 MW supercritical unit[J]. Energy, 2017, 122:505-527.
[15]	WANG C Y, ZHAO Y L, LIU M, et al. Peak shaving operational optimization of supercritical coal-fired power plants by revising control strategy for water-fuel ratio[J]. Applied Energy, 2018, 216:212-223.
[16]	王朝阳, 常仁杰, 朱庆玉, 等. 两种水煤比控制策略下调峰机组的能耗特性[J]. 西安交通大学学报, 2018, 52(7):115-122 WANG Chaoyang, CHANG Renjie, ZHU Qingyu, et al. Energy consumption characteristics of power units with two water-coal ratio control strategies in transient peak load regulation[J]. Journal of Xi'an Jiaotong University, 2018, 52(7):115-122
[17]	何钧, 鄢波, 彭道刚, 等. 利用过热器蓄热提升机组AGC负荷响应能力的研究与应用[J]. 中国电力, 2017, 50(7):74-78 HE Jun, YAN Bo, PENG Daogang, et al. Study and application of improving load response capacity with superheaters stored energy for coal-fired power plant[J]. Electric Power, 2017, 50(7):74-78
[18]	宫广正. 超临界火电机组运行灵活性提升控制策略研究及应用[J]. 中国电力, 2017, 50(8):22-26 GONG Guangzheng. Research on and application of the control strategy for flexibility improvement of supercritical fossil-fired power units[J]. Electric Power, 2017, 50(8):22-26
[19]	高爱国, 尚勇, 康静秋. 提高自动发电控制性能指标的协调控制策略优化与应用[J]. 热力发电, 2012, 41(12):43-47 GAO Aiguo, SHANG Yong, KANG Jingqiu. Optimization and application of coordination control strategy for improving the AGC performance[J]. Thermal Power Generation, 2012, 41(12):43-47
[20]	刘吉臻, 王耀函, 曾德良, 等. 基于凝结水节流的火电机组AGC控制优化方法[J]. 中国电机工程学报, 2017, 37(23):6918-6925 LIU Jizhen, WANG Yaohan, ZENG Deliang, et al. An AGC control method of thermal unit based on condensate throttling[J]. Proceedings of the CSEE, 2017, 37(23):6918-6925

660 MW超临界燃煤机组变负荷过程动态特性的仿真研究

Simulation Study on the Dynamic Characteristics of a 660 MW Supercritical Coal-Fired Power Unit During AGC Processes

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics

[1]	张磊, 马晓伟, 王满亮, 陈力, 高丙团. 互联新能源电力系统区内AGC机组分布式协同控制策略[J]. 中国电力, 2025, 58(3): 8-19.
[2]	张玉敏, 尹延宾, 吉兴全, 叶平峰, 孙东磊, 宋爱全. 计及热网不同运行状态下灵活性供给能力的综合能源系统优化调度[J]. 中国电力, 2025, 58(2): 88-102.
[3]	孙东磊, 王宪, 孙毅, 孟祥飞, 张涌琛, 张玉敏. 基于多面体不确定集合的电力系统灵活性量化评估方法[J]. 中国电力, 2024, 57(9): 146-155.
[4]	陈胜, 张洪略, 夏天, 杨雪, 张文军, 颜伟. 考虑TCPS考核约束的AGC机组动态优化模型[J]. 中国电力, 2024, 57(8): 145-151.
[5]	徐峰亮, 王克谦, 王文豪, 王鹏, 王焕昌, 张帅, 赵凤展. 计及运行灵活性的中压配电系统源-网-储协同扩展规划[J]. 中国电力, 2024, 57(7): 98-108.
[6]	王益斌, 陈飞雄, 邵振国, 张抒凌, 张伟骏, 李智诚. 基于权重系数校正的火储两阶段联合调频方法[J]. 中国电力, 2024, 57(3): 83-94.
[7]	万明元, 任鑫, 王渡, 金亚飞, 王志刚, 王廷举, 杨昌宏, 刘昊坤. 100 MW级联式S-CO₂循环动态特性研究[J]. 中国电力, 2024, 57(12): 169-177.
[8]	曹斌, 苏珂, 原帅, 肖谭南, 陈颖. 基于微分代数神经网络的含新能源区域电网端口动态特性学习方法[J]. 中国电力, 2023, 56(2): 23-31.
[9]	张国柱, 张钧泰, 文钰, 杨凯旋, 刘明, 刘继平. 燃煤机组烟气余热及水回收系统变工况特性和调控策略[J]. 中国电力, 2022, 55(4): 214-220.
[10]	刘志坦, 姚杰, 庄柯, 喻乐蒙, 周凯. 燃气轮机与燃煤机组SCR脱硝催化剂特性比较[J]. 中国电力, 2021, 54(6): 145-152.
[11]	贾西部. 石灰石-石膏湿法脱硫废水排放量深度解析[J]. 中国电力, 2020, 53(8): 139-144,163.
[12]	张顺, 闫培飞, 姚洪宇, 李生鹏, 曹士保, 高亚洲. 亚临界汽包炉深度调峰安全性评估及控制优化技术[J]. 中国电力, 2020, 53(7): 203-210.
[13]	唐耀华, 郭为民, 崔杨. 水-火电机组频率控制策略研究[J]. 中国电力, 2020, 53(6): 153-160,178.
[14]	张艳军, 刘佳琦, 高凯, 张建, 周在彦, 姜赫. 基于冲击负荷注入的电力系统混合动态仿真方法[J]. 中国电力, 2020, 53(3): 59-65.
[15]	张文建, 梁庚, 李庚达, 崔青汝. 智慧化全数字技术及其在电厂中的应用[J]. 中国电力, 2020, 53(11): 202-211.

模态框（Modal）标题

660 MW超临界燃煤机组变负荷过程动态特性的仿真研究

Simulation Study on the Dynamic Characteristics of a 660 MW Supercritical Coal-Fired Power Unit During AGC Processes

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 20

相关文章 15

编辑推荐

Metrics