汽轮发电机组轴系扭振模型参数识别方法

doi:10.11930/j.issn.1004-9649.2017.04.100.06

摘要/Abstract

摘要： 扭振在线监测和保护设备的扭应力分析精度取决于汽轮发电机组轴系扭振模型与实际轴系在扭振固有特性上的一致性。然而,在模化过程中模型的刚度往往容易出现误差,从而影响扭振分析的准确性。为了估算出模型的扭转刚度参数并消除其扭振固有特性误差,提出了一种通过建立刚度参数微增量与模型固有特性变化量之间的关系方程,求解刚度参数调整量的参数识别方法。经过反复迭代,调整后模型的扭振固有特性可与实测结果非常接近,从而保证扭振应力分析的准确性。

关键词: 汽轮发电机组, 轴系扭振, 扭振模型, 参数识别

Abstract: The precision of the torsional stress analysis for torsional vibration online monitoring and protection depends on the similarity of the inherent torsional vibration characteristics between the torsional vibration model and the actual turbine-generator shafts. However, errors are often produced in the stiffness parameters during the modeling process, which affects the precision of the torsional vibration analysis. In order to estimate the stiffness parameters of the model and eliminate the error of the inherent torsional vibration characteristics, a parameter estimation method for obtaining the adjustment of the stiffness parameters is proposed by establishing the relational equation between the micro-increment of the stiffness parameters and the changes of the inherent characteristics. Through repeated iteration, the inherent characteristics of the adjusted model can be very close to the torsional vibration test results, and thus ensures the precision of the torsional vibration stress analysis.

Key words: turbine-generator, torsional vibration, torsional vibration model, parameter estimation

中图分类号:

TM621

金铁铮, 张磊, 徐亚涛, 张俊杰, 崔亚辉, 顾煜炯. 汽轮发电机组轴系扭振模型参数识别方法[J]. 中国电力, 2017, 50(4): 100-105.

JIN Tiezheng, ZHANG Lei, XU Yatao, ZHANG Junjie, CUI Yahui, GU Yujiong. Parameter Estimation Method for Torsional Vibration Model of Turbine-Generator Shafts[J]. Electric Power, 2017, 50(4): 100-105.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.2017.04.100.06

https://www.electricpower.com.cn/CN/Y2017/V50/I4/100

参考文献

[1] WALKER D N, BOWER C E J, JACKSON R L, et al . Results of subsynchronous resonance test at Mohave[J]. IEEE Trans on Power Apparatus and Systems, 1975, 94(5): 1878-1889.
[2] 刘世宇,谢小荣,王仲鸿. 我国火电基地串补输电系统的次同步谐振问题[J]. 电网技术,2008,32（1）：5-8.
LIU Shiyu, XIE Xiaorong, WANG Zhonghong. SSR problem in compensated transmission system of thermal power bases in China [J]. Power System Technology, 2008, 32(1): 5-8.
[3] 杨煜,陈陈. 伊敏—大庆500 kV输电系统次同步谐振分析—兼论发电机轴系共振频率[J]. 电网技术,2000,24（5）：10-12.
YANG Yu, CHEN Chen. SSR in Yimin-Daqing 500 kV transmission system[J]. Power System Technology, 2000, 24(5): 10-12.
[4] 徐政,张帆. 托克托电厂串补送出方案次同步谐振问题的计算和分析[J]. 中国电力,2006,39（11）：21-26.
XU Zheng, ZHANG Fan. SSR analysis of series compensation transmission scheme for Tuoketuo Power Plant [J]. Electric Power, 2006, 39(11): 21-26.
[5] 齐阳. 多HVDC输电系统SSO抑制措施的协调控制研究[J]. 中国电力,2014,47（4）：108-112.
QI Yang. The coordination control for SSO restrain in multi- HVDC transmission system [J]. Electric Power, 2014, 47(4): 108-112.
[6] 郑志萍,吴军,杨武盖,等. 一种新的阻尼正弦原子分解算法辨识SSO模态参数[J]. 中国电力,2016,49（1）：75-79.
ZHENG Zhiping, WU Jun, YANG Wugai, et al . Modal parameter identification of SSO based on damping sine atomic decomposition optimized by improved IWO[J]. Electric Power, 2016, 49(1): 75-79.
[7] 董晓亮,谢小荣,李江,等. 大型风电场中不同位置的风机对次同步谐振特性影响程度的比较分析[J]. 中国电机工程学报, 2015,35（20）：5173-5180.
DONG Xiaoliang, XIE Xiaorong, LI Jiang, et al . Comparative study of the impact on subsynchronous resonance characteristics from the different location of wind generators in a large wind farm [J]. Proceedings of the CSEE, 2015, 35(20): 5173-5180.
[8] MIAO Z. Impedance-model-based SSR analysis for Type 3 wind generator and series-compensated network [J]. IEEE Transactions on Energy Conversion, 2012, 27(4): 984-991.
[9] FAN L, KAVASSERI R, MIAO Z, et al . Modeling of DFIG based wind farms for SSR analysis[J]. IEEE Transactions on Power Delivery, 2010, 25(4): 2073-2082.
[10] VARMA R K, AUDDY S, SEMSEDINI Y. Mitigation of subsynchronous resonance in a series-compensated wind farm using FACTS controllers[J]. IEEE Transactions on Power Delivery, 2008, 23(3): 1645-1654.
[11] 余畅,苏寅生,黄河. 盘南电厂汽轮机组轴系扭振保护装置启动情况分析[J]. 南方电网技术,2010,4（3）：92-95.
YU Chang, SU Yinsheng, HUANG He. Analysis on the start-up detail of torsional stress relay devices of turbine generators in Pannan Plant [J]. Southern Power System Technology, 2010, 4(3): 92-95.
[12] 王虎军,任小朦,刘锋,等. 发电厂轴系扭振保护装置动作分析[J]. 内蒙古电力技术,2011,29（5）：24-29.
WANG Hujun, REN Xiaomeng, LIU Feng, et al . Analysis to motion of shafting torsional vibration protective device in power plant [J]. Inner Mongolia Electric Power, 2011, 29(5): 24-29.
[13] 陈大宇,赵永林,刘全,等. 上都电厂轴系次同步扭振保护系统[J]. 电力系统保护与控制,2010,38（6）：122-125.
CHEN Dayu, ZHAO Yonglin, LIU Quan, et al . Torsional protection system at Shangdu Power Plant[J]. Power System Protection and Control, 2010, 38(6): 122-125.
[14] 顾煜炯,何成兵,杨昆. 汽轮发电机组轴系扭振监测与分析系统[J]. 仪器仪表学报,2001,22（3）：269-273.
GU Yujiong, HE Chengbing, YANG Kun. A monitoring and analyzing system for torsional vibrations of turbogenerator shafts [J]. Chinese Journal of Scientific Instrument, 2001, 22(3): 269-273.
[15] 张勇,蒋滋康,朱伟. DK-Ⅱ A型扭振监测系统[J]. 清华大学学报（自然科学版）,1996,36（7）：19-23.
ZHANG Yong, JIANG Zikang, ZHU Wei. DK-Ⅱ A type torsional vibration monitoring system[J]. Journal of Tsinghua University (Sci & Tech), 1996, 36(7): 19-23.
[16] 晏水平,黄树红. 汽轮发电机组转子温度分布对其扭转振动的影响[J]. 中国电机工程学报,2000,20（11）：10-12,16.
YAN Shuiping, HUANG Shuhong. Impact of temperature distribution on the torsional vibration of turbogenerator rotors [J]. Proceedings of the CSEE, 2000, 20(11): 10-12, 16.
[17] 徐婧,顾煜炯. 考虑轴系温度分布时扭振四端网络模型的修正[J]. 汽轮机技术,2013,55（6）：436-439.
XU Jing, GU Yujiong. A modified four-terminal network model of torsional vibration after considering the temperature distributions of the shafts [J]. Turbine Technology, 2013, 55(6): 436-439.
[18] 刘延柱,陈文良,陈立群. 振动力学[M]. 北京：高等教育出版社,1998：76-77.
LIU Yanzhu, CHEN Wenliang, CHEN Liqun. Vibration mechanics [M]. Beijing: Higher Education Press, 1998: 76-77.
[19] 赵昌宗. 大型汽轮发电机组扭振的计算和测量[J]. 东方电机, 2013（6）：55-62.
ZHAO Changzong. Monitoring and analysis for torsional vibration in turbine-generator shafts [J]. Dongfang Electrical Machine, 2013(6): 55-62.