Analysis on Actual Operation Performance of SCR Denitration Catalyst

doi:10.11930/j.issn.1004-9649.201707159

Abstract

Abstract: The control of the actual operating performance of the catalyst is critical to the stable operation of SCR denitrification system. In this paper, the fresh catalyst and used catalyst after different time periods of operation in a power plant were taken as the research objects. The physical and chemical properties, mechanical properties, and microstructure of catalyst are tested, and its impact on the operation of the catalyst is analyzed. Through the study on the process characteristics and activity of the catalyst in operation, it is expected that the catalyst performance test will provide the basis for the replacement and installation of the denitration catalyst. The results show that after the catalyst having been installed and used for more than two years in the coal-fired power plant, operational risk has increased to certain level with the escaping rate of ammonia approaching the upper limit of the guaranteed value . In order to ensure the safe and efficient operation of the denitrification system, the catalyst management should be actively involved after being put into service.

Key words: coal-fired power plant, denitrification, SCR, catalyst, catalyst activity, denitrification efficiency, escaping ammonia

CLC Number:

X511
TM621

DU Zhen, WANG Zhidong, YAN Min, JIANG Jianping, ZHU Yue. Analysis on Actual Operation Performance of SCR Denitration Catalyst[J]. Electric Power, 2018, 51(2): 133-136,155.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.201707159

https://www.electricpower.com.cn/EN/Y2018/V51/I2/133

References

[1] LI Qichao, CHEN Sifan, LIU Zhenyu, et al. Combined effect of KCl and SO₂ on the selective catalytic reduction of NO by NH₃ over V₂O₅/TiO₂ catalyst[J]. Applied Catalysis B: Environmental, 2015, 164: 475-482.
[2] HU P, HAN L, DONG S. A facile one-pot method to synthesize a polypyrrole/hemin nanocomposite and its application in biosensor, dye removal, and photothermal therapy[J]. Acs Applied Materials& Interfaces, 2014, 6(1): 500-506.
[3] 杜振, 钱徐悦, 何胜, 等.燃煤电厂烟气SCR脱硝成本分析与优化[J].中国电力, 2013, 46(10):124-128.
DU Zhen, QIAN Xuyue, HE Sheng, et al. Analysis and optimization for operating costs of gas SCR de-NO_x in coal-fired power plants[J].Electric Power, 2013, 46(10):124-128.
[4] 杜振, 付银成, 钱徐悦, 等.V-Sb-Nb/TiO₂催化剂的制备及其抗中毒性能研究[J].热力发电, 2014, 43(7):72-76.
DU Zhen, FU Yincheng, QIAN Xuyue, et al. Preparation and anti-poisoning behavior of V-Sb-Nb/TiO₂ catalysts[J]. Thermal Power Generation, 2014, 43(7):72-76.
[5] 杜振, 杨立强, 晏敏, 等.SCR脱硝催化剂全过程管理的构建与实施[J].中国电力, 2016, 49(4):12-16, 22.
DU Zhen, YANG Liqiang, YAN Min, et al. Construction and implementation of the whole process management for SCR denitration catalyst[J].Electric Power, 2016, 49(4):12-16, 22.
[6] LEE S M, KIM S S, HONG S C. Systematic mechanism study of the high temperature SCR of NO_x by NH₃ over a W/TiO₂ catalyst [J]. Chemical Engineering Science, 2012, 79(37): 177-185.
[7] LI X, LI J, PENG Y, et al. Regeneration of commercial SCR catalysts: Probing the existing forms of arsenic oxide[J].Environmental Science & Technology, 2015, 49( 16): 9971-9978.
[8] KIM J W, LEE W G, HWANG I S, et al. Recovery of tungsten from spent selective catalytic reduction catalysts by pressure leaching[J]. Journal of Industrial and Engineering Chemistry, 2015, 28: 73-77.
[9] 商雪松, 陈进生, 胡恭任. 不同运行时间烟气脱硝催化剂性能对比分析[J].中国电力, 2012, 45(1): 45-49.
SHANG Xuesong, CHEN Jinsheng, HU Gongren. Comparative analysis of de-NO_x catalysts with different operation-time[J].Electric Power, 2012, 45(1): 45-49.
[10] 陈进生, 商雪松, 赵金平, 等.烟气脱硝催化剂的性能检测与评价[J].中国电力, 2010, 43(11):64-69.
CHEN Jinsheng, SHANG Xuesong, ZHAO Jinping, et al.Performance determination and evaluation of denitration catalyst in flue gas[J].Electric Power, 2010, 43(11):64-69.
[11] 安敬学, 王磊, 秦淇, 等.SCR 脱硝系统催化剂磨损机理分析与治理[J].热力发电, 2015, 44(12):119-125.
AN Jingxue, WANG Lei, QIN Qi, et al. Mechanism research on catalyst attrition in SCR denitration system and the treatment[J]. Thermal Power Generation, 2015, 44(12):119-125.
[12] 肖雨亭, 徐莉, 贾曼, 等.蜂窝式脱硝催化剂在烟气中磨损行为的模拟研究[J].中国电力, 2012, 45(12):96-98.
XIAO Yuting, XU Li, JIA Man, et al.Research on abrasion simulation of de-NO_x honeycomb catalysts in flue gas[J].Electric Power, 2012, 45(12):96-98.
[13] 夏力伟, 张学锁, 韦红旗, 等.SCR烟气脱硝系统上层催化剂磨损原因分析[J].热力发电, 2015, 44(2):110-114.
XIA Liwei, ZHANG Xuesuo, WEI Hongqi, et al. Reason analysis on abrasion of upper catalyst layer in an SCR de-NO_x device:field test and numerical simulation[J]. Thermal Power Generation, 2015, 44(2):110-114.
[14] 晏敏, 陈进生, 宋小宁, 等.高含铝脱硝催化剂运行前后性能对比分析[J].中国电力, 2015, 48(4): 50-53.
YAN Min, CHEN Jinsheng, SONG Xiaoning, et al.Comparative analysis on the performance of high-content aluminium De-NO_x catalysts before and after operation [J].Electric Power, 2015, 48(4): 50-53.
[15] 王乐乐, 孔凡海, 何金亮, 等.超低排放形势下SCR脱硝系统运行存在问题与对策[J].热力发电, 2016, 45(12):19-24.
WANG Lele, KONG Fanhai, HE Jinliang, et al. Difficulties and countermeasures of SCR denitration system operation in ultra low emission situation[J]. Thermal Power Generation, 2016, 45(12):19-24.