Electric Power ›› 2023, Vol. 56 ›› Issue (6): 31-39.DOI: 10.11930/j.issn.1004-9649.202208091

• Stability Analysis and Control of New Energy Power System • Previous Articles     Next Articles

Identification Method for Control Parameters of Doubly-Fed Induction Generator Based on LSTM Neural Network

XUE Fei1, LI Hongqiang1, LI Xutao1, XU Hengshan2   

  1. 1. Electric Power Research Institute of State Grid Ningxia Electric Power Co., Ltd., Yinchuan 750001, China;
    2. College of Electrical Engineering & New Energy, China Three Gorges University, Yichang 443002, China
  • Received:2022-08-25 Revised:2023-04-27 Accepted:2022-11-23 Online:2023-06-23 Published:2023-06-28
  • Supported by:
    This work is supported by Natural Science Foundation of Ningxia Hui Autonomous Region (No.2022AAC03612).

Abstract: Since it is difficult to obtain highly accurate control parameters of the electromagnetic model of a doubly-fed induction generator (DFIG) under transient conditions, a high precision identification method for the control parameters of DFIG based on long short-term memory (LSTM) neural network was proposed. Firstly, the RT-LAB hardware-in-the-loop (HIL) simulation platform was used to measure and obtain the HIL data of the DFIG controller, and the identification model of DFIG was built in the Plecs platform. Secondly, the Person correlation coefficient method was used to extract highly correlated features and train the neural network. Finally, the proposed LSTM neural network was used to identify the control parameters of DFIG and compare them with the measured data. As a result, the feasibility, effectiveness, and practicability of the proposed method were verified. The results show that compared with the traditional identification methods, the proposed parameter identification method based on LSTM neural network can effectively improve the identification accuracy of the control parameters of the electromagnetic model of DFIGs under transient conditions.

Key words: doubly-fed induction generator, hard-in-the-loop, parameter identification, long short-term memory network, Person correlation coefficient method