Electric Power ›› 2018, Vol. 51 ›› Issue (10): 130-133,138.DOI: 10.11930/j.issn.1004-9649.201711088

Previous Articles     Next Articles

Analysis of Performance for SCR Deactivated Catalyst before and after Regeneration

DU Zhen1, WU Bo2, YAN Min1, ZHANG Yang1, ZHU Yue1   

  1. 1. Huadian Electric Power Research Institute Co., Ltd., Hangzhou 310030, China;
    2. Hongyanchi Power Plant of Huadian Xinjiang Power Co., Ltd., Urumqi 830047, China
  • Received:2017-11-08 Revised:2018-01-15 Online:2018-10-05 Published:2018-10-12
  • Supported by:
    This work is supported by Young Talents of China Society of Electrical Engineering (No.JLB-2017-283); National Key Research and Development Program of China (No.2016YFC0203704-2).

Abstract: In order to systematically study the performance of deactivated SCR catalyst for coal-fired power plant before and after regeneration, the microscopic characteristics of deactivated catalyst for a 330MW coal-fired unit are analyzed. The testing results show that after regeneration the active components of the catalyst after regeneration are effectively supplemented, and the catalyst activity is greatly improved. During the regeneration process, the sulfate salt deposition on the catalyst surface is eliminated and the weak acid and the strong acidity sites of the catalyst surface are enhanced, while the anatase phase of the catalyst is well maintained, and the microstructure of the catalyst is restored to a relaxed and even state. This proves that the catalyst regeneration method in terms of adding active ingredients and eliminating deposited salt can prolong the service life of the catalyst, and reduce the production cost of the power plant.

Key words: coal-fired power plant, SCR denitrification, deactivated catalyst, regeneration, micro-characteristics

CLC Number: