Electric Power ›› 2017, Vol. 50 ›› Issue (2): 5-10.DOI: 10.11930/j.issn.1004-9649.2017.02.005.06

• Column of UHV Transmission • Previous Articles     Next Articles

Research on Anti-Vibration Design System for UHV Large Crossing Transmission Line

QI Yi1, 2, RUI Xiaoming1, ZHU Kuanjun1, 2, WANG Jingchao2   

  1. 1. North China Electric Power University, Beijing 102206, China;
    2. China Electric Power Research Institute, Beijing 100192, China
  • Received:2016-08-04 Online:2017-02-20 Published:2017-02-22
  • Supported by:
    This work is supported by Science and Technology Project of State Grid Corporation of China (No. GCB17201200172).

Abstract: It is difficult for UHV large crossing conductors to resist aeolian vibration due to larger span and higher hanging point. At present, laboratory aeolian vibration simulation test is the only effective means to design anti-vibration schemes for UHV large crossing conductors. However, the test process is complicated, and real type conductors and hardwares must be used. An UHV large crossing anti-vibration design system is developed based on finite element method and energy balance principle. Modal analysis, spectrum analysis and transient analysis functions for bundled conductors aeolian vibration are provided, and the dynamic bending strain values at key points of bundled conductors are calculated. Optimized anti-vibration scheme can be recommended to aeolian vibration simulation test by comparison and analysis of several predesigned schemes. Simulation test period can be reduced and anti-vibration design efficiency can be improved with proposed method, which can better meet requirements of UHV power transmission project.

Key words: UHV, large crossing, aeolian vibration, anti-vibration scheme, design system

CLC Number: