Electric Power ›› 2015, Vol. 48 ›› Issue (4): 50-53.DOI: 10.11930/j.issn.10.11930.2015.4.50

• Column of Flue Gas Denilralion • Previous Articles     Next Articles

omparative Analysis on the Performance of High-Content Aluminium De-NOx Catalysts before and after Operation

YAN Min1, CHEN Jinsheng2, SONG Xiaoning3, DU Zhen1   

  1. 1. China Huadian Electric Research Institute, Hangzhou 310030, China;
    2. Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021, China;
    3. Zhejiang Electric Power Test&Research Institute, Hangzhou 310014, China
  • Received:2015-01-12 Online:2015-12-03 Published:2015-04-25

Abstract: In order to study the impact of excessive Al2O3 added to the catalyst carrier on the catalyst and its performance the appearance, technological characteristics, main chemical components, micro mechanisms, crystal structures and SEM between the fresh and 8 000-h-used high-content aluminum catalyst are compared and analyzed. The results show that after 8 000 hours of operation, the Al2O3 in the catalysts interacts with the SO2 and SO3 in the flue gas and turns to Al2(SO4)3 , which causes not only the catalysts to deform and break down, but also the micro specific surface area to fall off rapidly and the particles of the catalysts to sintering. Consequently, the denitration efficiency drops down sharply. Therefore, high-content aluminium de-NOx catalysts should be avoided being applied in the de-NOx reactors.

Key words: thermal power plant, flue gas de-NOx, selective catalytic reduction, catalyst, high-content aluminium catalyst, Al2O3

CLC Number: