中国电力 ›› 2022, Vol. 55 ›› Issue (4): 70-77.DOI: 10.11930/j.issn.1004-9649.202106020

• 基于电力电子装备的配电网运行控制与形态演变 • 上一篇    下一篇

未来配电网的分布式形态及规划方法

赵一男1, 宋斌1, 钱振宇2, 李顺昕1   

  1. 1. 国网冀北电力有限公司经济技术研究院,北京 100038;
    2. 上海交通大学 电气工程系,上海 200240
  • 收稿日期:2021-06-17 修回日期:2022-03-09 出版日期:2022-04-28 发布日期:2022-04-24
  • 作者简介:赵一男(1984—),女,高级工程师,从事配电网规划与评估、配电网安全经济运行研究,E-mail:friever@163.com;宋斌(1991—),男,工程师,从事电力系统规划设计,E-mail:444973563@qq.com;钱振宇(1996—),男,通信作者,硕士研究生,从事配电网规划、电力系统经济运行研究,E-mail:prohsw@126.com
  • 基金资助:
    国家自然科学基金资助项目(基于互逆映射对偶性的电力网络方程多解和可解性问题研究,51777121);国网冀北电力有限公司科技项目(未来配电网的分布式形态及规划方法研究,B3018 F20000 D)。

Dispatching Architecture and Planning Method of Future Distribution Network

ZHAO Yinan1, SONG Bin1, QIAN Zhenyu2, LI Shunxin1   

  1. 1. State Grid Jibei Electric Economic Research Institute, Beijing 100038, China;
    2. Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • Received:2021-06-17 Revised:2022-03-09 Online:2022-04-28 Published:2022-04-24
  • Supported by:
    This work is supported by National Natural Science Foundation of China (Research on Multiple Solutions and Solvability of Power Network Equations Based on Duality of Reciprocal Mapping, No. 51777121), Science and Technology Project of State Grid Jibei Electric Power Co.,Ltd. (Research on Dispatching Architecture and Planning Method of Future Distribution Network, No. B3018F20000D)

摘要: 随着物联网(Internet of Things,IoT)技术的逐渐成熟,智能终端设备大面积接入是大势所趋,同时大量分布式电源接入也对配电网架构形成冲击。首先,研究未来配电网的分布式形态,提出在集中式和分布式形态间进行转换的配电网设想,并给出分布式单元评估和划分方法。接着,研究柔性建模方法,并将其应用于配电网规划。最后,通过算例检验了所提的设想。

关键词: 未来配电网, 柔性规划, 分布式形态, 分布式电源

Abstract: With the development of Internet of Things(IoT)technology, the large-scale access of smart terminal equipment is the general trend. At the same time, a large number of distributed generation access also has an impact on the distribution network architecture. This paper first studies the distributed architecture of distribution network in the future and puts for-ward the idea of distribution network which can transform between centralized form and distributed form. The evaluation and division method of coupling units are given. Then, the method of flexibility modeling is studied and applied to distribution network planning. Finally, an example is given to test the assumption.

Key words: future distribution network, planning method considering flexibility, dispatching architecture, distributed generation