汽轮机DEH转速控制模式下的节能优化

doi:10.11930/j.issn.1004-9649.201908014

摘要/Abstract

摘要： 降低运行成本、提质增效、节能减排是目前火电行业的迫切需求。阐述汽轮机组数字式电液控制系统（digital electric-hydraulic control system，DEH）在转速控制模式下普遍存在的启机暖机时间长、暖机不充分、汽缸温升率较难控制以及甩负荷后操作复杂、转速难以稳定、短时间内重新并网困难等问题。从汽轮机调节汽门、控制机构入手，分析机组启动暖机的加热过程及甩负荷后的动态过程，对比现有技术的利弊，总结得出在机组启动过程中阀位函数设置不合理、甩负荷后DEH转速控制模式与旁路阀门特性不匹配是导致上述问题的根本原因。提出一种汽轮机DEH转速控制模式下的变阀位函数的优化方法，该方法能够实现自动暖机和机组甩负荷后的快速并网，在提高机组安全性的同时，保障机组的经济性，极大减轻了运行人员的工作压力及工作量。

关键词: 汽轮机, 转速控制, 数字电液控制系统, 节能, 暖机

Abstract: Currently thermal power industry calls for the operation cost reduction, quality and efficiency improvement as well as energy-saving and emission reduction urgently. In this paper, the problems that have been existing in digital electric-hydraulic control system (DEH) speed control mode widely are discussed in terms of long start-up duration, inadequate warming-up process, difficult control over cylinder temperature rise rate, the complex operation, unstable speed and unsuccessful re-connecting to the grid in a short time after load rejection. Starting with the regulating valve and control mechanism of steam turbine, the heating process and dynamic process after load rejection are analyzed. By comparing the pros and cons of the existing techniques, the unreasonable settings of valve position function during the start-up process and the mismatch between DEH speed control mode and bypass valve characteristics after load rejection are concluded as the root causes of the above problems. At last, an optimization method of variable valve position function in steam turbine DEH speed control mode is proposed, which can realize automatic warming-up and fast grid-connection of the unit after load rejection. Therefore it can improve the security of the unit while maintaining its economic performance. In addition, the operators' workload is greatly reduced and their stress at work is relieved.

Key words: steam turbine, speed control mode, digital electro-hydraulic control system, energy-saving, warming-up

徐章福, 邓彤天, 钟晶亮, 王锁斌, 张世海. 汽轮机DEH转速控制模式下的节能优化[J]. 中国电力, 2020, 53(4): 186-192.

XU Zhangfu, DENG Tongtian, ZHONG Jingliang, WANG Suobin, ZHANG Shihai. Energy-Saving Optimization of Steam Turbine DEH under Speed Control Mode[J]. Electric Power, 2020, 53(4): 186-192.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.201908014

https://www.electricpower.com.cn/CN/Y2020/V53/I4/186

参考文献

[1] 肖宏伟. 2018年电力形势分析与2019年展望[J]. 中国物价, 2019, 2(358): 13–16
XIAO Hongwei. Power situation analysis in 2018 and prospect in 2019[J]. China Price, 2019, 2(358): 13–16
[2] 李新, 容冰, 穆献中, 等. 生态环保推动火电行业高质量发展的路径机制及改进对策[J]. 环境保护, 2019, 47(2): 59–63
LI Xin, RONG Bing, MU Xianzhong, et al. The mechanism and improving measure of ecological environmental protection to promote high-quality development of thermal power industry[J]. Environmental Protection, 2019, 47(2): 59–63
[3] 周斌, 崔雪, 邹晨露, 等. 基于合作博弈的风水火联合运营研究[J]. 电测与仪表, 2019, 56(6): 69–75
ZHOU Bin, CUI Xue, ZOU Chenlu, et al. Research on wind-hydro-thermal power joint operation based on cooperative game theory[J]. Electrical Measurement & Instrumentation, 2019, 56(6): 69–75
[4] 黄小军. 600 MW汽轮机的优化启动[J]. 华电技术, 2016, 38(7): 20–24
HUANG Xiaojun. Optimal start up on 600 MW steam turbine[J]. Huadian Technology, 2016, 38(7): 20–24
[5] 郑文广, 司顺勇, 朱良松, 等. 1 000 MW机组启停节油技术研究[J]. 中国电力, 2014, 47(4): 38–43
ZHENG Wenguang, SI Shunyong, ZHU Liangsong, et al. Study on oil-saving technology in startup and shutdown of 1 000 MW units[J]. Electric Power, 2014, 47(4): 38–43
[6] 丁勇富. 配CFB锅炉的300 MW机组汽轮机暖机效果探讨[J]. 热力发电, 2010, 39(3): 78–81
DING Yongfu. An approach to warm-up effectiveness of steam turbine equipped for 300 MW CFB unit[J]. Thermal Power Generation, 2010, 39(3): 78–81
[7] 查文建. 联合循环机组凝汽器压力对汽轮机冷态启动暖机时间的影响[J]. 浙江电力, 2015, 34(5): 49–52
ZHA Wenjian. Influence of combined cycle units condenser pressure on warming-up time of turbine cold-state startup[J]. Zhejiang Electric Power, 2015, 34(5): 49–52
[8] 宗绪东, 孙奉仲. 配汽机构对汽轮机组经济性的影响及优化研究[J]. 汽轮机技术, 2015, 57(6): 475–477
ZONG Xudong SUN Fengzhong. Steam distribution device effect and optimization on the economy of steam turbo unit[J]. Turbine Technology, 2015, 57(6): 475–477
[9] 刘新龙, 巨林仓, 胡平. DEH阀门流量特性曲线校正[J]. 汽轮机技术, 2011, 53(4): 288–290
LIU Xinlong, JU Lincang, HU Ping. Adjustment for the flow characteristic curve of DEH valves[J]. Turbine Technology, 2011, 53(4): 288–290
[10] 万祥, 胡念苏, 韩鹏飞, 等. 大数据挖掘技术应用于汽轮机组运行性能优化的研究[J]. 中国电机工程学报, 2016, 36(2): 459–467
WAN Xiang, HU Niansu, HAN Pengfei, et al. Research on application of big data mining technology in performance optimization of steam turbines[J]. Proceedings of the CSEE, 2016, 36(2): 459–467
[11] 张春发, 王惠杰, 宋之平, 等. 火电厂单元机组最优运行初压的定量研究[J]. 中国电机工程学报, 2006, 26(4): 36–40
ZHANG Chunfa, WANG Huijie, SONG Zhiping, et al. Quantitative research of optimal initial operation pressure for the coal-fired power unit plant[J]. Proceedings of the CSEE, 2006, 26(4): 36–40
[12] 潘阳, 袁奇, 朱光宇. 进汽结构对部分进汽损失的影响研究[J]. 中国电机工程学报, 2018, 38(14): 4156–4164, 4321
PAN Yang, YUAN Qi, ZHU Guangyu. Numerical investigation on the influence of inlet structure on partial-admission losses[J]. Proceedings of the CSEE, 2018, 38(14): 4156–4164, 4321
[13] 张锐锋, 吴鹏, 柏毅辉, 等. 基于历史数据挖掘的汽轮机阀门管理曲线优化[J]. 电站系统工程, 2018, 34(5): 49–52
ZHANG Ruifeng, WU Peng, BAI Yihui, et al. Optimization for management curves of turbine valves based on historical data mining[J]. Power System Engineering, 2018, 34(5): 49–52
[14] 黄勇, 陈源培. DEH压力限制对超超临界机组甩负荷的影响[J]. 热力透平, 2012, 41(4): 303–306
HUANG Yong, CHEN Yuanpei. Effect of DEH main steam pressure limitation on load rejection of USC steam turbine unit[J]. Thermal Turbine, 2012, 41(4): 303–306
[15] 阚伟民, 蔡笋, 谢诞梅, 等. 超超临界1 000 MW机组甩负荷试验研究[J]. 热力发电, 2011, 40(5): 73–76, 80
KAN Weimin, CAI Sun, XIE Danmei, et al. Study on load rejection test of ultra-supercritical 1 000 MW unit[J]. Thermal Power Generation, 2011, 40(5): 73–76, 80
[16] 王异成, 张宝, 丁阳俊, 等. 660 MW机组甩负荷试验时转速飞升过高原因分析[J]. 浙江电力, 2015, 34(9): 46–49
WANG Yicheng, ZHANG Bao, DING Yangjun, et al. Cause analysis on high rotation speed rising of 660 MW units in load shedding test[J]. Zhejiang Electric Power, 2015, 34(9): 46–49
[17] 王家胜, 赵杰, 钟晶亮, 等. 超临界机组甩负荷试验超速原因分析及处理[J]. 热力发电, 2018, 47(8): 115–119
WANG Jiasheng, ZHAO Jie, ZHONG Jingliang, et al. Reason analysis and treatment for over-speed of load rejection test of supercritical units[J]. Thermal Power Generation, 2018, 47(8): 115–119
[18] 郭亚楠, 谢诞梅, 梅子岳, 等. CPR1000核电汽轮机高压缸甩负荷工况热应力及变形分析[J]. 热能动力工程, 2019, 34(2): 31–38
GUO Yanan, XIE Danmei, MEI Ziyue, et al. Thermal stress and deformation of high pressure casing of CPR1000 nuclear steam turbine in the load rejection condition[J]. Journal of Engineering for Thermal Energy and Power, 2019, 34(2): 31–38
[19] 徐章福, 邓彤天, 钟晶亮, 等. 一种用于汽轮发电机组甩负荷后快速稳定转速的方法: CN106958465A[P]. 2017-07-18.
[20] 徐章福, 邓彤天, 钟晶亮, 等. 一种适用于高中压联合启动汽轮发电机组的暖机方法: CN106948890A[P]. 2017-07-14.