[1] |
刘振亚. 特高压电网[M]. 北京:中国经济出版社, 2005.
|
[2] |
刘振亚. 特高压直流输电技术研究成果专辑(2008)[M]. 北京:中国经济出版社, 2005.
|
[3] |
刘振亚. 特高压电网(工程)前期论证[M]. 北京:中国电力出版社, 2008.
|
[4] |
毛艳, 鞠勇, 李庆峰, 等. ±800 kV特高压直流不同型式跳线电气特性的比较分析[J]. 电网技术, 2015, 39(4):961-967 MAO Yan, JU Yong, LI Qingfeng, et al. Comparative analysis of electrical characteristics of different type jumpers on ±800 kV DC transmission line[J]. Power System Technology, 2015, 39(4):961-967
|
[5] |
杨熙, 王青于, 廖晋陶, 等. 1000 kV特高压交流输电线路双回耐张塔刚性跳线电晕抑制分析[J]. 高电压技术, 2014, 40(6):1839-1846 YANG Xi, WANG Qingyu, LIAO Jintao, et al. Corona suppression analysis of rigid jumper in double-circuit tension tower for 1000 kV ultra high voltage AC transmission line[J]. High Voltage Engineering, 2014, 40(6):1839-1846
|
[6] |
黄文武, 贺振华, 蔡炜, 等. 基于紫外成像技术的棒-板间隙放电环境因素研究[J]. 高电压技术, 2015, 41(8):2788-2794 HUANG Wenwu, HE Zhenhua, CAI Wei, et al. Study on the environ-mental factors of rod-plane gap discharge based on UV imaging[J]. High Voltage Engineering, 2015, 41(8):2788-2794
|
[7] |
李靖, 彭宗仁, 刘鹏, 等. 特高压交流铝管式刚性跳线电场计算和分析[J]. 高电压技术, 2010, 36(1):205-211 LI Jing, PENG Zongren, LIU Peng, et al. Electric field calculation and analysis of UHVAC aluminum tube rigid jumper[J]. High Voltage Engineering, 2010, 36(1):205-211
|
[8] |
谢梁, 谷莉莉, 郑怀清, 等. 特高压交流刚性跳线金具电晕试验[J]. 高电压技术, 2009, 35(3):470-474 XIE Liang, GU Lili, ZHENG Huaiqing, et al. Corona test for UHVAC rigid jumper[J]. High Voltage Engineering, 2009, 35(3):470-474
|
[9] |
董吉谔. 电力金具手册[M]. 3版. 北京:中国电力出版社, 2010.
|
[10] |
张殿生. 电力工程高压送电线路手册[M]. 北京:中国电力出版社, 2004.
|
[11] |
陈勇, 万启发, 霍峰, 等. 1000 kV交流输电线路导线的电晕特性[J]. 高电压技术, 2007, 33(11):43-45 CHEN Yong, WAN Qifa, HUO Feng, et al. Corona characteristics of conductors for 1000 kV AC transmission lines[J]. High Voltage Engineering, 2007, 33(11):43-45
|
[12] |
王少华, 梅冰笑, 叶自强, 等. 紫外成像检测技术及其在电气设备电晕放电检测中的应用[J]. 高压电器, 2011, 47(11):92-97 WANG Shaohua, MEI Bingxiao, YE Ziqiang, et al. Ultraviolet imaging detection technology and application in corona discharge detection of electrical equipment[J]. High Voltage Apparatus, 2011, 47(11):92-97
|
[13] |
程应镗. 送电线路金具的设计安装试验和应用[M]. 北京:水利电力出版社, 1989.
|
[14] |
电力金具通用技术条件:GB/T 2314-2008[S]. 北京:中国标准出版社, 2008.
|
[15] |
1000 kV架空输电线路设计规范:GB 50665-2011[M]. 北京:中国电力出版社, 2014.
|
[16] |
熊易, 王保山, 左中秋, 等. 输电线路用带外串联间隙避雷器绝缘配合性能研究[J]. 高电压技术, 2014, 40(5):1399-1406 XIONGYi, WANG Baoshan, ZUO Zhongqiu, et al. Insulation coordination performance of externally gapped line arresters for transmission lines[J]. High Voltage Technology, 2014, 40(5):1399-1406
|
[17] |
王巨丰, 刘赟, 黎彬, 等. 基于向量电气几何模型的输电线路绕击耐雷性能研究[J]. 电网技术, 2008, 32(S2):240-244 WANG Jufeng, LIU Yun, LI Bin, et al. Research on shielding failure flashover rate for transmission line based on vector electric geometry model[J]. Power System Technology, 2008, 32(S2):240-244
|
[18] |
刘振国. 750 kV输电线路悬垂绝缘子串型式的探讨[J]. 电力建设, 2004, 25(6):24-26 LIU Zhenguo. Inquisition into type of suspension insulator strings for 750 kV transmission line[J]. Electric Power Construction, 2004, 25(6):24-26
|
[19] |
潘少成, 张要强, 胡选, 等. 1000 kV交流特高压双柱组合耐张塔软跳线电气试验[J]. 电力建设, 2011, 32(6):26-29 PAN Shaocheng, ZHANG Yaoqiang, HU Xuan, et al. Electric test of flexible jumper in double-pole-composite strain tower of 1000 kV AC ultra high voltage[J]. Electrical Power Construction, 2011, 32(6):26-29
|
[20] |
郑德至. 关于金具电晕及无线电干扰试验电压的探讨[J]. 电力建设, 1989(5):16-18 ZHENG Dezhi. Discussion on test voltage of corona and radio interference for fitting[J]. Electrical Power Construction, 1989(5):16-18
|
[21] |
王茂成, 邹悦, 王亚飞, 等. 输电线路复合绝缘子和金具串的优化设计[J]. 电力建设, 2011, 32(4):96-99 WANG Maocheng, ZOU Yue, WANG Yafei, et al. Optimization design of composite insulator and hardware string[J]. Electric Power Construction, 2011, 32(4):96-99
|