Study on Optimization of Forging Flange Designing in UHV Steel Tubular Tower

doi:10.11930/j.issn.1004-9649.2013.6.52.4

Abstract

Abstract: The popularization of the steel tubular tower in UHV projects has raised new requirements for the tower reliability and economics. By comparing the materials for steel tubular towers and those for angle steel towers and considering the structural characteristics of the steel tube tower, a method for improving the economics of the UHV steel tube tower by reducing the joints is advanced. The application of the forging flange in UHV steel tubular towers is analyzed in detail and a new method for forging flange fine designing is developed. In addition, combined with the design of the EHV/UHV quadruple-circuit steel tubular tower, the feasibility and economics of the related methods are studied. The research shows that in UHV steel tubular tower designing, the proportion of forging flanges can be minimized through several ways, such as strength classification, distribution optimization and material selection. All these can further improve the economics of the UHV steel tubular towers.

Key words: UHV, steel tubular tower, forging flange, design optimization, tower economics

CLC Number:

TM753

LI Qing-hua, WU Jing, XING Hai-jun, ZHU Bin-rong. Study on Optimization of Forging Flange Designing in UHV Steel Tubular Tower[J]. Electric Power, 2013, 46(6): 52-56.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.2013.6.52.4

https://www.electricpower.com.cn/EN/Y2013/V46/I6/52

References

[1] 孙竹森,程永锋,张强,等. 输电线路钢管塔的推广与应用[J]. 电网技术,2010,34（6）：186-192.
SUN Zhu-sen, CHENG Yong-feng, ZHANG Qiang, et al . Application and dissemination of steel tubular tower in transmission lines [J]. Power System Technology, 2010, 34(6): 186-192.
[2] 杨靖波,李茂华,杨风利,等. 我国输电线路杆塔结构研究新进展[J]. 电网技术,2008,32（22）：77-83.
YANG Jing-bo, LI Mao-hua, YANG Feng-li, et al . New advances in the study of transmission tower structure of China[J]. Power System Technology, 2008, 32(22): 77-83.
[3] 侯景鹏,陈加宝,雷俊方. 输电塔线体系非线性地震反应分析[J]. 中国电力,2012,45（11）：65-69.
HOU Jing-peng, CHEN Jia-bao, LEI Jun-fang. Nonlinear dynamic response analysis of the transmission tower-line system under earthquake [J]. Electric Power, 2012, 45(11): 65-69.
[4] 金逸,肖匀,刘庭,等. 500 kV同塔四回线路不全停运检修作业方式研究[J]. 中国电力,2012,45（9）：29-34.
JIN Yi, XIAO Yun, LIU Ting, et al . Study on circuit service without total outage of the 500 kV transmission line of four circuits on one tower [J]. Electric Power, 2012, 45(9): 29-34.
[5] 倪阳.浅析应用于钢管塔中的日式高颈锻造法兰[J].华东电力, 2009,37（8）：1259-1264.
NI Yang. Analysis of Japanese style welding neck flange on steel pipe tower [J]. East China Electric Power, 2009, 37(8): 1259-1264.
[6] 李清华,杨靖波,韩军科,等. 超/特高压交流同塔四回钢管塔设计及试验[J]. 中国电力,2012,45（3）：14-17.
LI Qing-hua, YANG Jing-bo, HAN Jun-ke, et al . Design and full- scale test for steel tubular tower of UHV and EHV quadruple- circuit transmission line on the same tower[J]. Electric Power,2012, 45(3): 14-17.
[7] 高雁,杨靖波,韩军科.超-特高压多回杆塔结构可靠性分析[J]. 电网技术,2010,34（9）：181-184.
GAO Yan, YANG Jing-bo, HAN Jun-ke. Analysis on structural reliability of multi-circuit tower for EHV and UHV AC power transmission line[J]. Power System Technology, 2010, 34(9): 181-184.
[8] 夏开全,李茂华,李峰. 特高压输电线路直线塔结构分析与试验[J]. 高电压技术,2007,33（11）：56-60.
XIA Kai-quan, LI Mao-hua, LI Feng. Structural analysis and testing research for Chinese 1 000 kV UHV AC transmission tower [J]. High Voltage Engineering, 2007, 33(11): 56-60.
[9] 李茂华,董建尧,杨靖波,等.特高压双回路钢管塔真型试验[J].中国电机工程学报,2009,29（34）：102-107.
LI Mao-hua, DONG Jian-yao, YANG Jing-bo, et al . Full-scale test for tubular steel tower applied in UHV AC double-circuit transmission line[J]. Proceedings of the CSEE, 2009, 29(34): 102-107.
[10] 黄璜,李清华,孟宪乔. Q420大规格角钢在±800 kV特高压杆塔中的应用[J]. 电力建设,2010,31（6）： 65-69.
HUANG Huang, LI Qing-hua, MENG Xian-qiao. Application on Q420 large width angle steel in ±800 kV UHV transmission tower [J]. Electric Power Construction, 2010, 31(6): 65-69.
[11] 中国电力科学研究院. 双回1 000 kV、单回±800 kV与双回500 kV、220 kV交流同塔多回输电线路杆塔材料及结构研究[R]. 2011.
[12] 吴国强,何长华. 钢管塔锻造法兰连接螺栓的受力计算[J]. 电力建设,2009,30（10）：1-5.
WU Guo-qiang, HE Chang-hua. Research on bolt calculation in forging flanges used in steel tube tower[J]. Electric Power Construction, 2009, 30(10): 1-5.
[13] 国家能源局. DL/T 5442—2010 输电线路铁塔制图和构造规定[S]. 2010.
[14] 赵建国,牛林. 日本特高压交流输电技术的研究与实践[J]. 电力系统及其自动化学报,2007,19（4）：1-6.
ZHAO Jian-guo, NIU Lin. Research and application of UHV AC transmission technologies in Japan[J]. Proceedings of the CSU- EPSA, 2007, 19(4): 1-6.
[15] 龚泉,肖立群. 新型钢管塔的设计与应用研究 [J].华东电力,2009, 37（8）：1265-1269.
GONG Quan, XIAO Li-qun. Review of the design and application of new steel-pipe tower [J]. East China Electric Power 2009, 37(8): 1265-1269.
[16] DL/T 5254—2010 架空输电线路钢管塔设计技术规定[S].
[17] 常建伟,徐德录,张东英,等. 我国输电线路钢管塔制造技术现状综述[J]. 钢结构,2011,26（8）：46-50.
CHANG Jian-wei, XU De-lu, ZHANG Dong-ying, et al . A review of manufacturing technology of transmission line steel tubular tower in China [J]. Steel Construction, 2011, 26(8): 46-50.