Simulation Study on 1 000-MW Unit Speed Rise During Load Shedding

doi:10.11930/j.issn.1004-9649.2014.4.22.4

Abstract

Abstract: Load shedding is the worst operation scenario for large turbo-generator sets, which will increase rotor speed rapidly and threaten the safety of units greatly. In this paper, the maximum speed rise of a 1 000-MW unit is simulated with Simulink, and quantitative analysis on the influence of reheat steam volume time constant and rotor time constant on the dynamic characteristics of the governing system is performed. Combined with the on-line test data, the fast cut back (FCB) condition is simulated with the speed rise estimated.

Key words: 1 000-MW unit, load rejection, speed rise, Simulink simulation

CLC Number:

TK32

KAN Wei-min, HU Peng-fei, XIE Dan-mei, XIONG Yang-heng. Simulation Study on 1 000-MW Unit Speed Rise During Load Shedding[J]. Electric Power, 2014, 47(4): 22-26.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.2014.4.22.4

https://www.electricpower.com.cn/EN/Y2014/V47/I4/22

References

[1] 王清,黄葆华,伍小林,等. 1 000 MW典型机组甩负荷试验[J].中国电力,2011,44（5）：65-69.
WANG Qing, HUANG Bao-hua, WU Xiao-lin, et al . Steam turbine load rejection test of typical 1 000 MW unit[J]. Electric Power, 2011, 44(5): 65-69.
[2] WAMKEUE R, JOLETTE C, KAMWA I. Alternative approaches for linear analysis and prediction of a synchronous generator under partial-and full-load rejection tests[J]. IET Electric Power Applications, 2007, 1(4): 581-590.
[3] SWIDENBANK E, BROWN M D, FLYNN D. Self-tuning turbine generator control for power plant [J]. Mechatronics, 1999, 9(5): 513-537.
[4] 冯伟忠. 大机组实现快速甩负荷的现实性和技术分析[J]. 动力工程,2008,28（4）：532-536,547.
FENG Wei-zhong. Practicability and technical analysis of implementing fast cut back(FCB) for great capacity power units[J]. Journal of Power Engineering, 2008, 28(4): 532-536, 547.
[5] 唐飞,董斌,赵敏. 超超临界机组在我国的发展及应用[J]. 电力建设,2010,31（1）：80-82.
TANG Fei, DONG Bin, ZHAO Min. USC unit development and application in China [J]. Electric Power Construction, 2010, 31(1): 80-82.
[6] 冯伟忠. 900 MW 超临界机组FCB 试验[J]. 中国电力,2005,38（2）：74-77.
FENG Wei-zhong. FCB test for 900 MW supercritical units[J]. Electric Power, 2005, 38(2): 74-77.
[7] 牛卫东. 单元机组运行[M]. 北京：中国电力出版社,2009.
NIU Wei-dong. The unit operation[M]. Beijing: China Electric Power Press, 2009.
[8] HAMMONS T J, YEO R L, GWEE C L, et al . Enhancement of power system transient response by control of HVDC converter power [J]. Electric Machines and Power Systems, 2000, 28(3): 219-241.
[9] 冯伟忠. 1 000 MW 级火电机组旁路系统作用及配置[J]. 中国电力,2005,38（8）：53-56.
FENG Wei-zhong. Functions and configuration of the bypass system for 1 000 MW class coal-fired power generation units[J].Electric Power, 2005, 38(8): 53-56.
[10] 魏铁铮,郑长庆,应学军. 陡河发电厂200 MW机组锅炉低温再热器改造可行性研究[J]. 华北电力技术,2001（8）：20-21.
WEI Tie-zheng, ZHEN Chang-qing, YIN Xue-jun. Feasibility study on low temperature re-heater improvement of 200 MW boiler unit of Douhe Power Plant [J]. North China Electric Power,2001(8): 20-21.
[11] 冯伟忠. 1 000 MW超超临界机组FCB试验[J]. 中国电力,2008, 41（10）：62-66.
FENG Wei-zhong. FCB test on 1 000 MW ultra-supercritical power generation unit [J]. Electric Power, 2008, 41(10): 62-66.
[12] LU S, HOGG B W. Dynamic nonlinear modelling of power plant by physical principles and neural networks [J]. International Journal of Electrical Power & Energy Systems, 2000, 22(1): 67-78.
[13] 阚伟民,蔡笋,谢诞梅,等. 超超临界1 000 MW机组甩负荷试验研究[J]. 热力发电,2011,40（5）：73-76.
KAN Wei-min, CAI Sun, XIE Dan-mei, et al . Study on load rejection test of ultra-supercritical 1 000 MW unit[J]. Thermal Power Generation, 2011, 40(5): 73-76.
[14] 俞成立. 1 000 MW汽轮机组甩负荷试验分析[J].华东电力,2007,35（6）：32-34.
YU Cheng-li. Load rejection tests for 1 000 MW steam turbine units [J]. East China Electric Power, 2007, 35(6): 32-34.
[15] 史小平,王子才. 汽轮机转速与功率同步控制新方法的仿真研究[J]. 系统仿真学报,2003,15（6）：823-840.
SHI Xiao-ping, WANG Zi-cai. Simulation study of a new method to synchronously control rotate speed and power of a steam turbine [J]. Journal of System Simulation, 2003, 15(6): 823-840.