扩径导线结构稳定性评估体系

doi:10.11930.2015.6.86

摘要/Abstract

摘要： 在满足输电容量和线路工程要求的前提下，使用扩径导线能够节省导体材料，进而减少铁塔载荷和结构重量。提出了4种JL（Ｘ）K/G1A-530（630）/45扩径导线的设计方案；针对4种扩径导线开展了扩径导线结构稳定性仿真分析、扩径导线结构稳定性展放验证、扩径导线与放线设备适配性及扩径导线的压接研究。根据研究结果，推荐圆线疏绞型扩径导线用于浙福线1 000 kV特高压交流同塔双回线路工程，给出了关于张力设备、放线滑车、卡线器、旋转连接器等施工设备的指导意见，并提出了评估扩径导线结构稳定性的方法。

关键词: 疏绞型扩径导线, 特高压, 同塔双回线路, 结构稳定性, 临界跳股张力

Abstract: Given the certain transmission capacity and engineering requirements, application of expanded diameter conductor can save conductor material and reduce the tower load and structure weight. Design schemes have been proposed and systematic studies have been carried out for four types of JL(X)K/G1A-530(630)/45 expanded diameter conductors, including simulation analysis and conductor-laying verification of structural stability, study of the suitability between the expanded diameter conductor and the conductor-laying equipment and study of the conductor crimping. Based on the studies, the expanded diameter round wires conductor with less strand of inner layer has been recommended for application in the Zhejiang~Fujian 1 000 kV ultra-high voltage transmission line, and guidance is provided on such construction equipment as tension equipment, tackle for paying-off, wire line cards and rotary joint. Finally, a stability evaluation system is established for the expanded-diameter conductor.

Key words: expanded diameter conductor with less strand of inner layer, ultra-high voltage, double-circuit on one-tower transmission line, structure stability, critical strand jumping tension

中图分类号:

TM75

万建成，司佳钧，刘龙，刘臻. 扩径导线结构稳定性评估体系[J]. 中国电力, 2015, 48(6): 86-93.

WAN Jiancheng, SI Jiajun, LIU Long, LIU Zhen. Evaluation System for Structural Stability of Expanded Diameter Conductor[J]. Electric Power, 2015, 48(6): 86-93.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930.2015.6.86

https://www.electricpower.com.cn/CN/Y2015/V48/I6/86

参考文献

[1] GB/T 1179—2008 圆线同心绞架空导线[S]. 2008
[2] 刘本粹，喻新强，郭日彩．扩径导线在超高压大容量输电工程中的应用展望[J]．电网技术，2007，31（21）：11－16．
LIU Bencui, Yu Xinqiang. Application prospect of diameter- extended conductor in EHV AC large-capacity transmission projects [J]. Power System Technology, 2007, 31(21): 11-16．
[3] 黄豪士. 输电线路节能型增扩容导线的特性[J]. 电力建设，2010，31（2）：29－34．
HUANG Haoshi. Transmission line energy-saving type upgrading conductor characteristics [J]. Electric Power Construction, 2010,31(2): 29-34.
[4] 毕庶达． 750 kV输电线路扩径导线跳股原因分析[J]．电力建设，2006，27（9）：2－3．
BI Shuda. Analysis on causes of strand jumping of extended diameter conductor for 750 kV transmission line[J]. Electric Power Construction, 2006, 27(9): 2-3.
[5] 张禄琦，郝阳，李小亭，等．扩径导线在特高压交流输电线路工程中的应用[J]．电力建设，2012，33（8）：92－95．
ZHANG Luqi, HAO Yang, LI Xiaoting, et al． Application of Diameter-extended Conductor in UHVAC Transmission Line Projects [J]． Electric Power Construction, 2012, 33(8): 92-95．
[6] 冯玉昌，李云阁，顿连标． 750 kV扩径导线的运行情况总结[J]．电力建设，2007，28（10）：43－46．
FENG Yuchang, LI Yunge. Operating summary of the 750 kV Oversized conductor[J]. Electric Power Construction, 2007, 28(10): 43-46．
[7] 金榕，王飞，冯爱军．西宁-格尔木750 kV双回路输变电工程用扩径导线LGJK-310/50的研制[J]．青海电力，2011，30（4）：16－18．
JIN Rong, WANG Fei. Design of LGJK-310/50 expanded- diameter conductor for xining-geermu 750 kV transmission line[J]. Qinghai Electric Power, 2011, 30(4): 16-18.
[8] 万建成. 扩径导线的分类与扩径方式的选择[J]. 电力建设， 2010，31（6）：112－118．
WAN Jiancheng, LIU Zhen, SUN Baodong, et al. Classification and applicability of diameter-expanded conductor[J]. Electric Power Construction, 2010, 31(6): 112-118.
[9] 冯登泰．接触力学的发展概况[J]．力学进展，1989，17（4）：431-446．
FENG Dengtai. The development situation of contact mechanics[J]. Advances in Mechanics, 1989, 17(4): 431-446.
[10] 尚勇，陈志达．带有摩擦的单边接触大变形问题的研究[J]．应用数学与力学，1989，10（12）：17－23．
SHANG Yong, CHEN Zhida. Large deformation of unilateral contact problem with friction[J]. Applied mathematics and mechanics, 1989, 10(12): 17-23.
[11] 杨智勇，王伟，苏帆，等. 采用数字图像处理方法对架空输电导线散股的研究[J]. 中国电力，2014，47（1）：1－7．
YANG Zhiyong, WANG Wei, SU Fan, et al. Research on untwisted strand of overhead transmission lines based on digital image processing method [J]. Electric Power, 2014, 47(1): 1-7.
[12] 欧阳克俭，胡波涛，陈军君，等. 特高压输电导线断线冲击效应研究[J]. 中国电力，2013，46（7）：52－56．
OUYANG Kejian, HU Botao, CHEN Junjun, et al. Impact effect research of UHV transmission conductor break [J]. Electric Power, 2013, 46(7): 52-56.
[13] JIANG W G, HENSHALL J L, WALTON J M． A concise finite element model for 3-layer straight wire rope strand[J]．International Journal of Mechanical Sciences, 2000, 42(1): 63-86．
[14] 刘金朝，王成国，梁国平．多弹性体接触问题的数值算法[J]．中国铁道科学，2003，24（3）：69－73．
LIU Jinchao, WANG Chengguo. Numerical algorithm to solve elastic multi-body contact problems[J]. China Railway Science, 2003, 24(3): 69-73.
[15] JIANG W G, WARBY M, HENSHALL J L. Statically indeterminate contacts in axially loaded wire strand[J]． European Journal of Mechanics A/Solids, 2008, 27(1): 69-78．
[16] JIANG W G． A concise finite element model for pure bending analysis of simple wire strand[J]． International Journal of Mechanical Science, 2012, 54(1): 69-73．
[17] 万建成，司佳钧，刘彬，等. 一种结构稳定的大截面扩径导线设计[J]. 电力建设，2013，34（10）：92－96．
WAN Jiancheng, SI Jiajun, LIU Bin, et al. Design of expanded diameter conductor with large section and stable structure[J]. Electric Power Construction, 2013, 34(10): 92-96.