中国电力 ›› 2020, Vol. 53 ›› Issue (1): 169-176.DOI: 10.11930/j.issn.1004-9649.201904070

• 发电 • 上一篇    下一篇

润滑油交流油泵振动问题分析及治理

何小锋1, 刘晓锋1, 卢修连1, 华东奇2, 马运翔1, 何利鹏1, 唐鹏涛2   

  1. 1. 江苏方天电力技术有限公司, 江苏 南京 211102;
    2. 国家电投集团协鑫滨海发电有限公司, 江苏 滨海 224500
  • 收稿日期:2019-04-14 修回日期:2019-07-02 发布日期:2020-01-15
  • 作者简介:何小锋(1983-),男,硕士,高级工程师,从事旋转机械振动分析及处理工作,E-mail:118hxf@163.com

Analysis and Treatment of the Vibration Problem of AC Lubricating Oil Pump

HE Xiaofeng1, LIU Xiaofeng1, LU Xiulian1, HUA Dongqi2, MA Yunxiang1, HE Lipeng1, TANG Pengtao2   

  1. 1. Jiangsu Frontier Electric Technologies Co., Ltd., Nanjing 211102, China;
    2. SPIC Jiangsu Electric Power Co., Ltd., Binhai 224500, China
  • Received:2019-04-14 Revised:2019-07-02 Published:2020-01-15

摘要: 为了解决给水泵汽轮机交流润滑油泵的振动问题,保障机组的安全运行,采用了数值计算结合现场振动测试分析的方法,确认故障原因,设计合理的加固方案,最终解决振动故障。结果表明,交流油泵振动大,主要原因是由起支撑作用的油箱顶板垂直向整体刚度弱导致的共振和顶板受力后不均匀变形引起的泵底座倾斜所致。

关键词: 油泵, 振动, 刚度, 共振, 不均匀变形, 数值计算

Abstract: In order to solve the vibration problem of the AC lubricating oil pumps for the feed water pump driving turbine and ensure the safe operation of the unit, the method of numerical calculation combined with on-site vibration testing and analysis is adopted to diagnose the cause of the fault, then design a reasonable reinforcement scheme and eventually solve the vibration fault problem. The results show that the resonance caused by the weak vertical integral stiffness of the supporting oil tank roof and the uneven deformation of the roof from the tilt of the pump foot are the major reasons contributing to the large vibrations of the AC lubricating oil pumps.

Key words: oil pump, vibration, stiffness, resonance, non-uniform deformation, numerical calculation