面向继电保护系统级测试的缺陷自动定位方法

doi:10.11930/j.issn.1004-9649.201705110

中国电力 ›› 2018, Vol. 51 ›› Issue (5): 10-16.DOI: 10.11930/j.issn.1004-9649.201705110

面向继电保护系统级测试的缺陷自动定位方法

陈创, 陈文睿, 李津

广州供电局有限公司, 广东广州 510620

收稿日期:2017-05-23 修回日期:2018-03-20 出版日期:2018-05-05 发布日期:2018-05-07
作者简介:陈创(1975-),男,广东茂名人,高级工程师,从事变电站继电保护和自动化现场维护工作,E-mail:13802964287@139.com;陈文睿(1984-),男,海南海口人,工程师,从事变电站继电保护和自动化专业管理工作,E-mail:chen_wr@sina.com;李津(1985-),男,湖南长沙人,硕士研究生,工程师,从事变电站继电保护和自动化现场维护工作,E-mail:304922952@qq.com
基金资助:
广东省自然科学基金资助项目（S2013010012885）；广州供电局有限公司科技项目（GZM2014-2-0033）。

Automatic Defect Locating Method for Relay Protection Systematic Testing

CHEN Chuang, CHEN Wenrui, LI Jin

Guangzhou Power Supply Bureau, Guangzhou 510620, China

Received:2017-05-23 Revised:2018-03-20 Online:2018-05-05 Published:2018-05-07
Supported by:
This work is supported by the Natural Science Foundation of Guangdong Province (No.S2013010012885) and the Science and Technology of Guangzhou Power Supply Bureau (No.GZM2014-2-0033).

摘要/Abstract

摘要： 为提升智能变电站继电保护测试的效率，提高继电保护可靠性，提出了面向智能变电站继电保护系统级测试的缺陷自动定位方法。分析当前继电保护系统级测试的功能架构，阐述了方法的定位。建立了过程层网络的数据流模型，该数据流模型包括端口连接模型，报文发布模型和订阅模型。基于该模型提出了继电保护测试的缺陷定位方法，算例分析表明，缺陷定位方法能够将缺陷精确定位到故障端口及其相邻链路，帮助测试人员快速发现缺陷位置，提高继电保护系统测试效率继电保护系统可靠性有着重要意义。

关键词: 继电保护, 测试, 系统级, 缺陷定位

Abstract: In order to increase efficiency and improve reliability of protective relaying system testing, an automatic defect locating method for relay protection systematic testing is proposed. Firstly, a data flow model, including port connection, publishing and subscribing models is developed. Based on proposed data flow model, a fault location method is established. In order to verify accuracy of developed models and proposed methods, a simplified protective relaying system is employed to present a case study. The proposed model and method are applied to the case and the fault location results demonstrate the accuracy and efficiency of proposed model and method during protective relaying testing.

Key words: relay protection, testing, whole-view, defect locating

中图分类号:

TM774

陈创, 陈文睿, 李津. 面向继电保护系统级测试的缺陷自动定位方法[J]. 中国电力, 2018, 51(5): 10-16.

CHEN Chuang, CHEN Wenrui, LI Jin. Automatic Defect Locating Method for Relay Protection Systematic Testing[J]. Electric Power, 2018, 51(5): 10-16.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.201705110

https://www.electricpower.com.cn/CN/Y2018/V51/I5/10

参考文献

[1] IEEE Power & Energy Society. IEEE guide for power system protection testing:IEEE C37.233[S]. 2009.
[2] INGRAM D M E, STEINHAUSER F, MARINESCU C, et al. Direct evaluation of IEC 61850-9-2 process bus network performance[J]. IEEE Transactions on Smart Grid, 2012, 3,(4):1853-1854.
[3] YANG L, CROSSLEY P A, WEN A, et al. Design and performance testing of a multivendor IEC61850-9-2 process bus based protection scheme[J]. IEEE Transactions on Smart Grid, 2014, 5(3):1159-1164.
[4] 侯伟宏, 裘愉涛, 吴振杰, 等. 智能变电站继电保护GOOSE回路安全措施研究[J]. 中国电力, 2014, 47(09):143-148.HOU Weihong, QIU Yutao, WU Zhenjie, et al. Study on GOOSE isolation measures in smart substation relay protection[J]. Electric Power, 2014, 47(09):143-148.
[5] Wang J, Zhou H. Conceptual design and the future development for operation smart system in China southern power grid[J]. Ieee transactions on smart grid. 2013, 4(3):1621-1629.
[6] Cai Y, Cao Y, Li Y, et al. Cascading failure analysis considering interaction between power grids and communication networks[J]. IEEE Transactions on Smart Grid, 2016, 7(1):530-538.
[7] 汤奕, 李峰, 王琦, 等. 通信系统故障对电力系统实时负荷控制影响的量化评价方法[J]. 电力自动化设备, 2017, 37(2):90-96.TANG Yi, LI Feng, WANG Qi, et al. Quantitative evaluation of communication system fault effect on real-time load control of power system[J]. Electric Power Automation Equipment, 2017, 37(2):90-96.
[8] ZADEH M R D, SIDHU T S, KLIMEK A. Implementation and testing of directional comparison bus protection based on IEC61850 process bus[J]. IEEE Transactions on Power Delivery, 2011, 26(3):1530-1537.
[9] INGRAM D M E, SCHAUB P, TAYLOR R R, et al. Performance analysis of IEC 61850 sampled value process bus networks[J]. IEEE Transactions on Industrial Informatics, 2013, 9(3):1445-1454.
[10] 叶远波, 孙月琴, 黄太贵, 等. 继电保护相关二次回路的在线状态检测技术[J]. 电力系统自动化, 2014, 38(23):108-113.YE Yuanbo, SUN Yueqin, HUANG Taigui, et al. On-line state detection technology of relay protection relevant secondary circuits[J]. Automation of Electric Power Systems, 2014, 38(23):108-113.
[11] 朱林, 王鹏远, 石东源. 智能变电站通信网络状态监测信息模型及配置描述[J]. 电力系统自动化, 2013, 37(11):87-92.ZHU Lin, WANG Pengyuan, SHI Dongyuan. Status monitoring information model and configuration description of communication network in smart substations[J]. Automation of Electric Power Systems, 2013, 37(11):87-92.
[12] 井实. 智能变电站二次系统测试方法及其关键技术研究[D]. 成都:电子科技大学, 2013.
[13] JING S, HUANG Q, WU J, et al. A novel whole-view test approach for onsite commissioning in smart substation[J]. IEEE Transactions on Power Delivery, 2013, 28(3):1715-1722.
[14] 井实, 黄琦, 甄威, 等. 基于无线同步技术的智能变电站全场景试验系统[J]. 电力系统自动化, 2013, 37(2):72-78.JING Shi, HUANG Qi, ZHEN Wei, et al. A panoramic test system for intelligent substation based on wireless time synchronization technology[J]. Automation of Electric Power Systems. 2013, 37(2):72-78.
[15] 张延旭. 智能变电站继电保护系统的信息流建模与可靠性提升策略[D]. 广州:华南理工大学, 2016.
[16] INGRAM D M E, SCHAUB P, CAMPBELL D A. Use of precision time protocol to synchronize sampled-value process buses[J]. IEEE Transactions on Instrumentation and Measurement, 2012, 61(5):1173-1180.
[17] ZADEH M R D, SIDHU T S, KLIMEK A. Suitability analysis of practical directional algorithms for use in directional comparison bus protection based on IEC 61850 process bus[J]. IET Generation, Transmission & Distribution, 2011, 5(2):199-208.
[18] MA K, HUANG S, CHEN J, et al. Discussion of the testing technology for protection device used in digital substation[C]//China International Conference on Electricity Distribution. IEEE, 2011:1-5.
[19] Network Engineering Guidelines:IEC 61850-90-4[S/OL]. (2013-08-01)[2017-01-03]. http://www.iec.ch/
[20] 王海柱, 蔡泽祥, 邵向潮, 等. 智能变电站过程层网络关键对象建模与仿真[J]. 中国电力. 2013(6):80-84.WANG Haizhu, CAI Zexiang, SHAO Xiangchao, et al. Modeling and simulation of key objects in process-level network of smart substation[J].Electric Power. 2013(6):80-84.
[21] 凌光, 王志亮, 吕建龙, 等. 基于OPNET的智能变电站过程层网络建模方法[J]. 中国电力, 2017, 50(01):79-84, 91.LING Guang, WANG Zhiliang, LV Jianlong, et al. Modeling method for process-level network in smart substation based on OPNET[J]. Electric Power, 2017, 50(01):79-84, 91.
[22] 陈桥平, 陈志光, 黄勇, 等. 基于虚拟连接割集的智能变电站继电保护安全隔离策略[J]. 中国电力, 2016, 49(3):88-93.CHEN Qiaoping, CHEN Zhiguang, HUANG Yong, et al. Security isolation strategies based on virtual connections cut set for relay protection in smart substation[J]. Electric Power, 2016, 49(3):88-93.
[23] ZHANG Y, CAI Z, LI X, et al. Analytical modeling of traffic flow in the substation communication network[J]. IEEE Transactions on Power Delivery, 2015, 30(5):2119-2127.
[24] 张延旭, 蔡泽祥, 龙翩翩, 等.智能变电站通信网络实时故障诊断模型与方法[J]. 电网技术, 2016, 40(6):1851-1857.ZHANG Yanxu, CAI Zexiang, LONG Pianpian. Real-time fault diagnosing models and method for communication network in smart substation[J]. Power System Technology, 2016, 40(6):1851-1857.
[25] 邹俊雄, 黄成巧, 张延旭, 等.智能变电站通信网络虚拟局域网建模与优化配置方法[J]. 电力自动化设备, 2015, 35(8):137-142.ZOU Junxiong, HUANG Chengqiao, ZHANG Yanxu, et al. Modelling and optimization of VLAN for smart substation communication network[J]. Electric Power Automation Equipment, 2015, 35(8):137-142.

面向继电保护系统级测试的缺陷自动定位方法

Automatic Defect Locating Method for Relay Protection Systematic Testing

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	刘清泉, 杨鹏, 李铁成, 王献志, 文明浩. 应对继电保护多场景的数字仿真测试方法[J]. 中国电力, 2025, 58(2): 118-125.
[2]	余江, 高宏慧, 史泽兵, 蒋纬纬, 武芳瑛, 詹庆才, 张蕊. 继电保护远程运维系统报文合规检测及入侵阻断技术应用[J]. 中国电力, 2024, 57(3): 135-143, 151.
[3]	刘中硕, 郑少明, 陶畅, 刘一民, 陈乾, 王书鸿, 于逸廷, 薛安成. 继电保护装置缺陷文本专业词典构建及其语言特性分析[J]. 中国电力, 2023, 56(7): 146-155.
[4]	叶远波, 章昊, 王同文, 王志华, 陈勇. 基于边缘物联的电力系统二次继保设备测试管控技术[J]. 中国电力, 2023, 56(7): 156-162,174.
[5]	张业茂, 李妮, 周翠娟, 鲁浩男. 750 kV高海拔交流输电线路无线电干扰测试数据分析[J]. 中国电力, 2023, 56(2): 77-85.
[6]	刘林彬, 苗泉强, 李俊娥. 基于模糊测试的GOOSE协议解析漏洞挖掘方法[J]. 中国电力, 2022, 55(4): 33-43.
[7]	叶远波, 程晓平, 张兆云, 刘宏君, 汪伟, 邵庆祝. 电力系统故障区域录波自动分析关键技术[J]. 中国电力, 2022, 55(4): 93-99.
[8]	万克厅, 陆玲霞, 于淼, 齐冬莲. 基于多组件并行架构的电力CPS实时联合仿真平台[J]. 中国电力, 2022, 55(2): 51-61.
[9]	牛海军, 张雪松, 全姗姗, 刘胜春, 司佳钧. 特高压交流线路金具常见电晕位置及串型优化[J]. 中国电力, 2022, 55(2): 108-114.
[10]	于永军, 许立国, 林子杰, 孙冰涵, 刘秋降, 吴振升, 任之杰. 基于级联Ｈ桥变流器的风电网宽频带谐波阻抗测量装置[J]. 中国电力, 2022, 55(11): 73-83.
[11]	杨胡萍, 黄煌, 何志勤, 张扬, 杨文思, 周睿. 基于数据拟合的继保设备失效率调整因子模型[J]. 中国电力, 2021, 54(9): 96-101.
[12]	谭振龙, 钱相宜, 蔡文畅. 配置高抗站的海上风电长距离海缆送出继电保护分析[J]. 中国电力, 2021, 54(8): 175-181.
[13]	邓二平, 孟鹤立, 王延浩, 赵志斌, 黄永章. 高压大功率器件用6 kV/180 ℃高温反偏测试装置研制[J]. 中国电力, 2021, 54(2): 133-139.
[14]	刘浩然, 周凯, 王昱皓, 李蓉, 傅尧, 饶显杰. 基于电磁耦合注入的电力电缆局部缺陷在线定位方法[J]. 中国电力, 2021, 54(12): 177-185,194.
[15]	肖磊, 李伯中, 张素香, 赖俊森, 刘璐, 田照宇. 电力通信网络中的量子保密通信示范应用与测评[J]. 中国电力, 2021, 54(1): 175-181,202.

模态框（Modal）标题

面向继电保护系统级测试的缺陷自动定位方法

Automatic Defect Locating Method for Relay Protection Systematic Testing

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics