[1] 曹祖庆. 汽轮机变工况特性[M]. 北京:水利电力出版社,1991:141. [2] 沈士一. 汽轮机原理[M]. 北京:水利电力出版社,1992:163. [3] 蔡颐年. 蒸汽轮机[M]. 西安:西安交通大学出版社,1988:307-310. [4] 江宁,曹祖庆. 从经济性看汽轮机滑压运行的最佳方式[J]. 上海汽轮机,2002(1):36-42. JIANG Ning, CAO Zuqing. In terms of economy is the best mode of steam turbine sliding pressure operation[J]. Shanghai Steam Turbine, 2002(1): 36-42. [5] REINKER J K, MASON P B. Steam turbines for large power applications: GER—3646D[R]. GE Power Systems Schenectady, NewYork: 1996. [6] 张春发,王惠杰,宋之平,等. 火电厂单元机组最优运行初压的定量研究[J]. 中国电机工程学报,2006,26(4):36-40. ZHANG Chunfa, WANG Huijie, SONG Zhiping, et al . Quantitative research of optimal initial operation pressure for the coal-fired power unit plan [J]. Proceedings of the CSEE, 2006, 26(4): 36-40. [7] 万忠海,晏涛,汪飞,等. 汽轮机变压运行全局寻优试验方法[J]. 热力发电,2013(7):100-104. WAN Zhonghai, YAN Tao, WANG Fei, et al . Global optimization test method for variable pressure operation mode in steam turbines [J]. Thermal Power Generation, 2013(7): 100-104. [8] 万忠海,鲁锦,陈文,等. 带过载补汽节流配汽机组变压运行特性研究[J]. 中国电力,2012,45(12):16-20. WAN Zhonghai, LU Jin, CHEN Wen, et al . Research on variable pressure operating characteristics of throttling units with additional supplying steam at overload [J]. Electric Power, 2012, 45(12): 16-20. [9] 李勇,单丽清,徐世明,等. 汽轮机调节汽门重叠度与节流损失之间关系的计算分析[J]. 汽轮机技术,2013,55(4):255-257. LI Yong, SHAN Liqing, XU Shiming, et al . The calculation and analysis on the relation of overlap and throttling losses for steam turbine’s governing valves [J]. Turbine Technology, 2013, 55(4): 255-257. |