[1] 张法科. 大型汽轮机不同喷嘴配汽方式对轴瓦温度和轴振动的影响[J]. 电力建设,2012,33(10):67-70. ZHANG Fa-ke. Influence of different nozzle governing modes on bearing pad temperature and shaft vibration in large turbine [J].Electric Power Construction, 2012, 33(10): 67-70. [2] 姜求志,王金瑞,马士林. 火力发电厂金属材料手册[M]. 北京:中国电力出版社,2001:535-540. [3] 韩彦广,黄来. 600 MW超临界汽轮机调峰运行过程中高中压转子疲劳寿命分析[J]. 汽轮机技术,2012,54(1):59-62. HAN Yan-guang, HUANG Lai. Fatigue life analysis of 600 MW supercritical steam turbine HIP rotor under peak load operation[J]. Turbine Technology, 2012, 54(1): 59-62. [4] 施维新,石静波. 汽轮发电机组振动及事故[M]. 北京:中国电力出版社,2008:64-66. [5] 张法科. 660 MW超临界汽轮机组高压调节阀故障分析与处理[J]. 内蒙古电力技术,2012,30(2):119-122. ZHANG Fa-ke. Analysis and treatment of 660 MW supercritical steam turbine high-pressure regulating valve failure[J]. Ineer Mongolia Electric Power, 2012, 30(2): 119-122. [6] 田国成,陈会平,柳洪涛. 超临界汽轮机高中压转子弯曲及异常振动的分析与处理[J]. 动力工程,2009,29(10):909-913. TIAN Guo-cheng, CHEN Hui-ping, LIU Hong-tao. The analysis and treatment of HP/IP rotor’s bending and abnormal vibration of the supercritical steam turbine[J]. Journal of Power Engineering, 2009, 29(10): 909-913. [7] 郭平英,刘宝林. 大型汽轮机高中压转子大轴弯曲事故分析及对策[J]. 陕西电力,2009,27(9):42-45. GUO Ping-ying, LIU Bao-lin. Analysis on accident of main shaft bending of HP-IP rotors in large steam turbine and its countermeasures [J]. Shaanxi Power, 2009, 27(9): 42-45. [8] 张学延,杨寿敏,张卫军,等. 汽轮发电机组转子材质缺陷引起的振动问题[J]. 中国电力,2010,43(5):38-42. ZHANG Xue-yan, YANG Shou-min, ZHANG Wei-jun, et al .Vibration problems caused by materical defects of turbine- generator unit rotor [J]. Electric Power, 2010, 43(5): 38-42. [9] 何国安,张礼强,张学延,等. 国产600 WM汽轮机高中压转子弯曲的动平衡策略[J]. 热力透平,2011,40(4):274-277. HE Guo-an, ZHANG Li-qiang, ZHANG Xue-yan, et al . Dynamic balance of HP-IP rotor for domestic 600 MW steam turbines [J]. Thermal Turbine, 2011, 40(4): 274-277. [10] 肖高绘,葛庆,蒋浦宁,等. 600 WM超临界机组高中压转子弯曲的动平衡修复[J]. 热力透平,2009,38(4):259-262. XIAO Gao-hui, GE Qing, JIANG Pu-ning, et al . Solving deflection of HP-IP rotor for a 600 MW supercritical unit by dynamic balance test [J]. Thermal Turbine, 2009, 38(4): 259-262. [11] 朱洪波,李红明,张俊杰. 沙角C厂660 MW机组中压转子弯曲事故分析及改进[J]. 中国电力,1997,30(11):37-40. ZHU Hong-bo, LI Hong-ming, ZHANG Jun-jie. Bending failure analysis and improvement of intermediate pressure rotor of 660 MW unit in Shajiao C power plant[J]. Electric Power, 1997, 30(11): 37-40. [12] 陆颂元.大型机组动静碰磨的振动特征及现场应急处理方法[J]. 中国电力,2003,36(1):6-11. LIU Song-yuan. Vibration characteristics and on-site emergency trouble-shooting method of rubbing between moving and stationary parts of steam turbine-generator units [J]. Electric Power, 2003, 36(1): 6-11. [13] 张学延,张卫军,王延博. 汽轮发电机转子突发性振动问题分析[J]. 中国电力,2001,34(12):11-15. ZHANG Xue-yan, ZHANG Wei-jun, WANG Yan-bo. Analysis of sudden vibration of turbo-generator rotor [J]. Electric Power, 2001, 34(12): 11-15. |