强度级差带颈锻造法兰试验研究

doi:10.11930.2015.4.107

中国电力 ›› 2015, Vol. 48 ›› Issue (4): 107-112.DOI: 10.11930.2015.4.107

强度级差带颈锻造法兰试验研究

何长华，邢海军，李清华，吴静

中国电力科学研究院，北京 100055

收稿日期:2015-01-11 出版日期:2015-04-25 发布日期:2015-12-03
作者简介:何长华（1962—），男，天津人，高级工程师（教授级），从事输电线路研究。E-mail: hechanghua@epri.sgcc.com.cn

Study on Strength-Difference Forged Hubbed Flange Test

HE Changhua, XING Haijun, LI Qinghua, WU Jing

China Electric Power Research Institute, Beijing 100055, China

Received:2015-01-11 Online:2015-04-25 Published:2015-12-03

摘要/Abstract

摘要： 带颈锻造法兰在输电线路钢管塔上已广泛应用，但带颈法兰规格单一，与钢管受力不匹配，即承载力低的钢管连接承载力偏大的锻造法兰，导致钢管塔不经济。针对目前带颈锻造法兰的设计方法和使用情况，结合钢管塔构件的受力特性及钢管规格库，确定锻造法兰的强度级差配置方案，通过强度级差配置的Q420高强对焊带颈锻造法兰试件轴拉试验，测试了法兰和螺栓的受力特性，验证带颈锻造法兰按强度级差配置和螺栓受力修正系数的合理性，为今后钢结构设计提供了基础性研究数据。

关键词: 强度级差, 带颈锻造法兰, Q420, 钢管塔, 法兰螺栓受力修正系数

Abstract: In recent years, the forged hubbed flange has been widely used on steel tube tower of power transmission line. However, the hubbed flange is of single specification and mismatch with steel tube in stress(i.e., the steel tube with relatively low bearing capacity is connected to the forged flange with relatively high bearing capacity), which makes the steel tube tower uneconomical. Based on the existing design method and practical use of hubbed flange, a strength difference arrangement scheme is determined for forged flange according to the stress characteristics of the members of steel tube tower and the specification bank for steel tube. The stress characteristics of flange and bolt are tested and the rationality of strength-difference-based arrangement of forged hubbed flange and the stress correction coefficient of bolts are verified through the axial tensile test in which the specimen of strength-difference-arranged Q420 high-strength buttwelded forged hubbed flange is used. The test can provide the fundamental data for the design of steel structure in future.

Key words: strength-difference, forged hubbed flange, Q420, steel tube tower, stress correction coefficient of flange bolts

中图分类号:

TU391

何长华，邢海军，李清华，吴静. 强度级差带颈锻造法兰试验研究[J]. 中国电力, 2015, 48(4): 107-112.

HE Changhua, XING Haijun, LI Qinghua, WU Jing. Study on Strength-Difference Forged Hubbed Flange Test[J]. Electric Power, 2015, 48(4): 107-112.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930.2015.4.107

https://www.electricpower.com.cn/CN/Y2015/V48/I4/107

参考文献

[1] 孙竹森，程永锋，张强，等. 输电线路钢管塔的推广应用[J]. 电网技术，2010，34（6）：186－192．
SUN Zhusen, CHENG Yongfeng, ZHANG Qiang, et al. Application and dissemination of steel tubular tower in transmission lines [J]. Power System Technology, 2010, 34(6): 186-192.
[2] 李峰，田璐，陈海波，等. 特高压钢管塔研制与应用[J]. 电力建设，2012，33（11）：70－73．
LI Feng, TIAN Lu, CHEN Haibo, et al. Development and application of steel tube tower in UHV transmission line[J]. Electric Power Construction, 2012, 33(11): 70-73.
[3] 曾德伟，郭耀杰，刘汉生，等. Q460钢锻造平焊带颈法兰节点轴心受压性能分析[J]. 电力建设，2012，33（4）：86－89．
ZENG Dewei, GUO Yaojie, LIU Hansheng, et al. Analysis of the behavior of Q460 forging welding neck flange joints under axial compressive load [J]. Electric Power Construction, 2012, 33(4):86-89.
[4] Q/GDW 391—2009 输电线路钢管塔构造设计规定[S].
Q/GDW 391—2009 Technical regulation for conformation design of steel tubular towers of transmission lines [S].
[5] 李清华，吴静，邢海军，等. 特高压钢管塔锻造法兰优化设计研究[J]. 中国电力，2013，46（6）：52－56．
LI Qinghua, WU Jing, XING Haijun, et al. Study on optimization of forging flange in UHV steel tube tower[J]. Electric Power,2013, 46(6): 52-56.
[6] 吴静. 高强度柔性带颈锻造法兰的应用研究[J].建筑结构，2013，43（8）：36-40.
WU Jing. Application study on high strength flexible high-neck forging flanges [J]. Building Structure, 2013, 43(8): 36-40.
[7] 吴国强，何长华，耿景都，等. 钢管塔锻造法兰连接螺栓的受力计算[J]. 电力建设，2009，30（10）：1-4.
WU Guoqiang, HE Changhua, GENG Jingdu, et al. Research on bolt calculation in forging flanges used in steel tube tower [J]. Electric Power Construction, 2009, 30(10): 1-4.
[8] 付饶，杜风贞，武志勇. 大型锻造法兰脆性开裂原因分析输电钢管塔新型锻造法兰受弯性能研究[J]. 失效分析与预防，2012，7（4）：257-261.
FU Rao, DU Fengzhen, WU Zhiyong. Failure analysis of large forged flange[J]. Failure Analysis and Prevention, 2012, 7(4):257-261.
[9] 陈海波，邢海军，李振福. 750 kV输变电钢管塔架结构承载力及构造的试验研究[J]. 中国电力，2005，33（19）：17－20．
CHEN Haibo, XING Haijun, LI Zhenfu. Testing and study on structure and load-carrying capacity of tubular tower and frame for 750 kV power transmission and transformation[J]. Electric Power, 2005, 33(19): 17-20.
[10] 陈海波，何长华，李振福，等. 钢管结构无加劲法兰计算方法的试验研究[J]. 电力建设，2005，26（7）：16－19．
CHEN Haibo, HE Changhua, LI Zhenfu, et al. Test and study on calculation method of steel tube non-stiffened flange [J]. Electric Power Construction, 2005, 26(7): 16-19.
[11] 施俊杰，潘玉江，秦力，等. 输电钢管塔新型锻造法兰受弯性能研究[J]. 水电能源科学，2013，31（8）：184－187．
SHI Junjie, PAN Yujiang, QIN Li, et al. Stretch bending performance analysis of forging flange for transmission steel tube tower [J]. Water Resources and Power, 2013, 31(8): 184-187.
[12] 吴国志. 螺栓紧固应力与紧固扭矩计算[J]. 内燃机与动力装置，2012（1）：39-41.
WU Guozhi. Calculation of tightening stress and torque of bolt [J]. Internal Combustion Engine & Powerplant, 2012(1): 39-41.

强度级差带颈锻造法兰试验研究

Study on Strength-Difference Forged Hubbed Flange Test

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

[1]	唐盼，雷兴列，刘凯，刘庭，肖宾，彭勇，苏梓铭，吴田. 特高压钢管塔线路带电作业间隙放电特性研究[J]. 中国电力, 2016, 49(3): 72-75.
[2]	邢海军, 韩军科, 施刚, 张大长, 李振宝, 王旭明. 直缝钢管轴压稳定性能研究[J]. 中国电力, 2014, 47(1): 57-62.
[3]	李清华，吴静，邢海军，朱彬荣. 特高压钢管塔锻造法兰优化设计研究[J]. 中国电力, 2013, 46(6): 52-56.
[4]	张子富，杨靖波，杨风利，李清华. 重冰区特高压酒杯型钢管塔设计及试验[J]. 中国电力, 2013, 46(5): 45-50.
[5]	李清华, 杨靖波, 韩军科, 董建尧. 超/特高压交流同塔四回钢管塔设计及试验[J]. 中国电力, 2012, 45(3): 14-17.

模态框（Modal）标题

强度级差带颈锻造法兰试验研究

Study on Strength-Difference Forged Hubbed Flange Test

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics