Research on Electric Contact Calculation and Heating of 500 kV Transmission Line Clamps

doi:10.11930/j.issn.1004-9649.2016.11.025.06

Abstract

Abstract: In order to solve the clamp breaking problems caused by high operating temperature of 500 kV transmission line clamps, the calculation method of clamp contact resistance is investigated based on the NY-type clamps, and a finite element model of clamp electric contact heating is established with ANSYS to study the relation between the maximum electric contact temperature and the contact pressure and the temperature variation from the internal to external of the clamp. From the studies, it is found that the maximum temperature tends to decrease rapidly first and slowly afterwards with the pressure increase, and the maximum temperature reaches 31.42 ℃ at I=600 A under rated pressure; With the pressure increase, the maximum temperature occurs successively on the electric contact between aluminum plate and bolt, and the electric contact between the aluminums, and the electric contact between aluminum plate and bolt; A temperature difference exist between the internal and external of clamps but their temperature varies consistently, so the external temperature of clamps can present indirectly the operating temperature of clamps. Finally, the calculation method and simulation results are verified by experiments.

Key words: clamp, electric contact, contact resistance, contact pressure, maximum temperature, temperature difference

CLC Number:

TM751

BAO Jiankang, GAO Bo, ZHANG Xueqing. Research on Electric Contact Calculation and Heating of 500 kV Transmission Line Clamps[J]. Electric Power, 2016, 49(11): 25-30.

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.electricpower.com.cn/EN/10.11930/j.issn.1004-9649.2016.11.025.06

https://www.electricpower.com.cn/EN/Y2016/V49/I11/25

References

[1] 刘纯,陈红冬,欧阳克俭,等. 碳纤维复合芯导线耐张线夹断裂分析[J]. 中国电力,2015,48（10）：97-100.
LIU Chun, CHEN Hongdong, OUYANG Kejian, et al . Analysis on the strain clamp fracture of ACCC[J]. Electric Power, 2015, 48(10): 97-100.
[2] 丁永福,王祖力,张燕秉,等. ±800 kV特高压直流换流站阀厅金具的结构特点[J]. 高压电器,2013,49（9）：13-18.
DING Yongfu, WANG Zhuli, ZHANG Yanbing, et al . Design structure characteristics of valve hall fittings in the ±800 kV HVDC converter station[J]. High Voltage Apparatus, 2013, 49(9): 13-18.
[3] 徐元哲,王乐天,刘雪冬,等. 电力电缆接头测温系统的设计[J]. 高电压技术,2009,35（12）：2977-2982.
XU Yuanzhe, WANG Letian, LIU Xuedong, et al . Design of temperature measurement system for cable junction based on FBG[J]. High Voltage Engineering, 2009, 35(12): 2977-2982.
[4] 李雪. 耐热导线耐张线夹发热问题解决方案研究[D]. 北京：华北电力大学,2010：9-10.
LI Xue. Research on the solution to the problem of the heat- resisting wire strain clamp giving off heat[D]. Beijing: North China Electric Power University, 2010: 9-10.
[5] 林杰,刘刚,张海鹏,等. 架空线路并沟线夹温度分布研究[J]. 电力系统保护与控制,2013,41（24）：88-94.
LIN Jie, LIU Gang, ZHANG Haipeng, et al . Research of temperature distribution of overhead lines parallel groove clamp[J]. Power System Protection and Control, 2013, 41(24): 88-94.
[6] 李阳林,周龙武,张宇,等. 双分裂导线连接金具异常发热原因分析与研究[J]. 中国电力,2016,49（5）：35-38.
LI Yanglin, ZHOU Longwu, ZHANG Yu, et al . Analysis on the abnormal heating of the link fittings for double-bundled conductors [J]. Electric Power, 2016, 49(5): 35-38.
[7] 王财宝,盛戈皞,曾奕,等. 基于ZigBee技术的导线接头温度集群监测[J]. 电力自动化设备,2009,29（11）：45-49.
WANG Caibao, SHENG Gehao, ZENG Yi, et al . Cluster monitoring system of transmission line joint temperatures based on ZigBee technology[J]. Electric Power Automation Equipment, 2009, 29(11): 45-49.
[8] 任丽佳,盛戈皞,曾奕,等. 动态提高输电线路输送容量技术的导线温度模型[J]. 电力系统自动化,2009,33（5）：40-44.
REN Lijia, SHENG Gehao, ZENG Yi, et al . A conductor temperature model based on dynamic line rating technology[J]. Automation of Electric Power Systems, 2009, 33(5): 40-44.
[9] 任西春,朱宽军,刘超群. 特高压输电线路新型防舞器建模分析[J]. 中国电机工程学报,2011,31（16）： 96-101.
REN Xichun, ZHU Kuanjun, LIU Chaoqun. Modeling and analysis of new anti-galloping devices on UHV transmission lines[J]. Proceedings of the CSEE, 2011, 31(16): 96-101.
[10] 谢天喜,莫娟,彭宗仁,等. 750 kV输电线路耐张塔绕跳间隔棒结构优化[J]. 高电压技术,2011,37（7）：1656-1662.
XIE Tianxi, MO Juan, PENG Zongren, et al . Strcture optimization of spacers on jumpers of strain towers on 750 kV transmission line [J]. High Voltage Engineering, 2011, 37(7): 1656-1662.
[11] 厉天威,黄文京,何民,等. 有限元法在高压输电线路线夹能量损耗计算中的应用[J]. 电网技术,2011,35（4）：218-222.
LI Tianwei, HUANG Wenjing, HE Min, et al. Power loss calculation of clamps for high voltage transmission line by finite element method[J]. Power System Technology, 2011, 35(4): 218-222.
[12] MILENKO B, VALERY K, NIKOLAI M. 电接触理论、应用与技术[M]. 许良军,译. 北京：机械工业出版社,2010：46-49.
[13] GREENWOOD J A, WILLIAMSON J B P. Contact of nominally flat surfaces [J]. Proceedings of the Royal Society A Mathematical Physical & Engineering Sciences, 1966, 295(295): 300-319.
[14] 彭向阳,陈驰,饶章权,等. 基于无人机多传感器数据采集的电力线路安全巡检及智能诊断[J]. 高电压技术,2015,41（1）：159-166.
PENG Xiangyang, CHEN Chi, RAO Zhangquan, et al . Safety inspection and intelligent diagnosis of transmission line based on unmanned helicopter of multi sensor data acquisition[J]. High Voltage Engineering, 2015, 41(1): 159-166.
[15] 张文峰,彭向阳,陈锐民,等. 基于无人机红外视频的输电线路发热缺陷智能诊断技术[J]. 电网技术,2014,38（5）：1334-1338.
ZHANG Wenfeng, PENG Xiangyang, CHEN Ruimin, et al . Intelligent diagnostic techniques of abnormal heat defect in transmission lines based on unmanned helicopter infrared video[J]. Power System Technology, 2014, 38(5): 1334-1338.
[16] JACKSON R L, CRANDALL E R, BOZACK M J. An analysis of scale dependent and quantum effects on electrical contact resistance between rough surfaces[C]//Electrical Contacts (Holm), 2012 IEEE 58th Holm Conference on IEEE, 2012: 1-10.
[17] 产品集合技术规范（GPS）表面结构轮廓法表面粗糙度参数及其数值：GB/T 1031—2009[S]. 北京：中国标准出版社,2009.
Standardization Administration of China. Product specifications set surface contour method(GPS) Surface texture roughness parameters and their values: GB/T 1031-2009 [S]. Beijing: China Standard Press, 2009.
[18] 张辉,韩学山,王艳玲. 架空输电线路运行载流量分析[J]. 电网技术,2008,32（14）：31-35.
ZHANG Hui, HAN Xueshan, WANG Yanling. Analysis on current carrying capacity of overhead lines being operated[J]. Power System Technology, 2008, 32(14): 31-35.