中国电力 ›› 2013, Vol. 46 ›› Issue (12): 52-58.DOI: 10.11930/j.issn.1004-9649.2013.12.52.6

• 发电 • 上一篇    下一篇

汽轮机调节系统模型仿真校核技术

盛锴, 朱晓星, 倪宏伟, 刘复平   

  1. 湖南省电力公司科学研究院,湖南 长沙 410007
  • 收稿日期:2013-09-06 出版日期:2013-12-23 发布日期:2015-12-10
  • 作者简介:盛锴(1983—),男,湖南长沙人,硕士,工程师,从事机网协调研究和热工自动控制优化工作。
  • 基金资助:
    湖南省电力公司科投资助项目(KZ11KI6015)

Simulation and Model Validation of Steam Turbine and Its Governing System

SHENG Kai, ZHU Xiao-xing, NI Hong-wei, LIU Fu-ping   

  1. Hunan Electric Power Research Institute, Changsha 410007, China
  • Received:2013-09-06 Online:2013-12-23 Published:2015-12-10

摘要: 汽轮机及其调节系统模型参数实测是电力系统建模的重要组成部分,仿真校核是保证模型参数正确性的关键。针对汽轮机及其调节系统模型参数仿真校核中存在的问题和难点,研究了其解决方法并开发了一套基于该解决方法的汽轮机及其调节系统模型参数仿真校核的软件。软件能够根据实际汽轮机及其调节系统的特性调整模型实现仿真,并且能够根据仿真和实际结果自动计算校核指标。软件能够减少使用者的工作量同时保证校核精度。

关键词: 汽轮机, 调节系统, 电力系统建模, 仿真校核, 软件

Abstract: Parameter testing and measurement for the steam turbine and its governor is an indispensable part of power system modeling, in which simulation and validation are playing a critical role to ensure correct parameters. Aiming at the issues and difficulties existing in the simulation and model validation, the applied solution methods are studied and a set of software was developed for simulation and validation of steam turbine and its governor’s model. The software can adjust the model and implement the simulation according to the characteristics of actual steam turbine and its governor. In addition, it can also calculate the assessment indices automatically based on the simulation results. Therefore, this software package can greatly reduce the workload of users with the accuracy of simulation and validation guaranteed.

Key words: steam turbine, governing system, modeling of power system, simulation and validation, software

中图分类号: