中国电力 ›› 2013, Vol. 46 ›› Issue (1): 50-53.DOI: 10.11930/j.issn.1004-9649.2013.1.50.3

• 发电 • 上一篇    下一篇

600 MW机组调节级压力高问题分析及治理

陈滨, 唐海宁, 许晨光   

  1. 江苏国信扬州发电有限责任公司,江苏 扬州 225131
  • 收稿日期:2012-08-13 出版日期:2013-01-05 发布日期:2015-12-09
  • 作者简介:陈滨(1962—),男,江苏南通人,高级工程师,从事火电厂管理工作。E-mail: chenbin@yz2pp.com

Analysis and Solutions of High Governing Stage Pressure Problem for 600-MW Steam Turbines

CHEN Bin, TANG Hai-ning, XU Chen-guang   

  1. Jiangsu Guoxin Yangzhou Power Generation Co., Ltd., Yangzhou 225131, China
  • Received:2012-08-13 Online:2013-01-05 Published:2015-12-09

摘要: 某电厂超临界机组在投产后汽机调节级压力逐步升高。检修中发现汽机高压缸通流部分存在较严重的结垢,严重影响机组带额定负荷运行。通过对垢样的分析,确定了造成高压缸通流部分结垢的原因。针对这些原因,采取了高、中压缸通流部分喷丸除垢、锅炉酸洗和化学精处理系统消缺等一系列措施,使该机组检修后调节级压力和铭牌出力恢复正常,调节级压力高的问题得到了彻底解决。

关键词: 超临界机组, 调节级压力, 结垢, 汽水品质

Abstract: The governing stage pressure of a supercritical steam turbine has been increasing since the unit commitment. During the overhaul, scaling is discovered on the turbine blades, which seriously influences the turbine operated at rated load. The analysis on the deposits finally discloses the reasons for scaling. Some measures such as shotpeening for the HP and IP flow paths, acid washing for the boiler and defect elimination for the water precision treatment equipment, are taken, which enables the turbine governing stage pressure to drop to the designed value and the turbine to carry the rated load. Therefore, the problem of high governing stage pressure is solved thoroughly.

Key words: supercritical unit, governing stage pressure, scaling, quality of water and steam

中图分类号: