新型自动加氧工艺的控制方法及应用

doi:10.11930/j.issn.1004-9649.201608114

中国电力 ›› 2017, Vol. 50 ›› Issue (10): 144-147.DOI: 10.11930/j.issn.1004-9649.201608114

新型自动加氧工艺的控制方法及应用

郭金平, 王钊, 张小宏, 王宁飞

西安热工研究院有限公司,陕西西安 710032

收稿日期:2016-08-23 出版日期:2017-10-25 发布日期:2017-10-30
作者简介:郭金平（1979—）,男,山东德州人,硕士,工程师,从事火电厂化学水处理系统的研发、调试、试验、技术升级优化等工作。E-mail: gjpnt2008@163.com

Control Method and Application of Novel Automatic Oxygen Injection Technology

GUO Jinping, WANG Zhao, ZHANG Xiaohong, WANG Ningfei

Xi’an Thermal Power Research Institute Co., Ltd., Xi’an 710032, China

Received:2016-08-23 Online:2017-10-25 Published:2017-10-30

摘要/Abstract

摘要： 为保证机组负荷波动时给水溶解氧浓度的恒定,提出了新型自动加氧工艺,也称液态恒值自动加氧技术。该技术利用液体不可压缩的特性,将纯氧气与除盐水在加压后充分融合,通过加氧管线输入到给水系统,彻底避开了氧气本身具有的可压缩特性缺陷,因而可实现氧气以除盐水为载体的刚性投加。该技术已在若干采用加氧工艺的火电机组中实施,实践结果表明,采用液态恒值自动加氧技术后,在给水水量任意变化时,仍能保证省煤器入口溶解氧质量浓度波动范围控制在±3 μg/L以内,彻底解决了气态加氧时溶解氧浓度跟随机组负荷反复波动的固有难题,为机组安全连续运行、节能减排提供了有力的技术保证。

关键词: 发电机组, 给水加氧, 自动加氧, 恒值控制, 刚性投加

Abstract: In order to ensure the constant concentration of dissolved oxygen during unit load fluctuations, a new automatic oxygen injection technology is proposed, i. e. liquid state constant value automatic oxygen injection technique. By taking the advantage of the characteristics of incompressibility of liquids, the technique mixes pure oxygen with salt water sufficiently after they are pressurized and then the mixture is injected into the water supply system through the oxygen injection pipeline. In this way, the defect of the compressibility of oxygen can be avoided such that rigid dosing of oxygen dissolving is implemented in the desalted water. This technique has been implemented in a number of thermal power units with oxygen injection. From the results of the practices it is evident that even with random changes of feed water volume, the dissolved oxygen fluctuation will still be maintained within ±3 ug/L by using this technique. Therefore, the inherent difficulty of repetitive fluctuation of dissolved oxygen following the unit load change with gaseous oxygen-injection is solved completely. this technology can provide a strong technical support for the continuous operation, energy conservation and emission reduction of the power units.

Key words: power generating unit, feed water oxygen-adding, automatic oxygen-adding oxygen, constant value control, rigid dosing

中图分类号:

TM628.1

郭金平, 王钊, 张小宏, 王宁飞. 新型自动加氧工艺的控制方法及应用[J]. 中国电力, 2017, 50(10): 144-147.

GUO Jinping, WANG Zhao, ZHANG Xiaohong, WANG Ningfei. Control Method and Application of Novel Automatic Oxygen Injection Technology[J]. Electric Power, 2017, 50(10): 144-147.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.201608114

https://www.electricpower.com.cn/CN/Y2017/V50/I10/144

参考文献

[1] 顾庆华,付昱. 国华太仓发电厂超临界机组直流锅炉给水加氧处理实践[J]. 热力发电,2009,38(12)：92-94.
GU Qinghua, FU Yu. Practice of oxygen-adding treatment for feed- water of ONCE-through boilers equipped for supercritical units in Guohua taicang power plant [J]. Thermal Power Generation,2009, 38(12): 92-97.
[2] 朱莉. 1 000 MW超超临界机组给水加氧处理技术的应用[J]. 上海电力,2009(6)：448-450.
ZHU Li. Application of oxygen-feeding technique in 1 000 MW ultra-supercritical units [J]. ShangHai Electric Power, 2009(6): 448-450.
[3] 谭华安. 给水加氧技术在节能降耗上的应用[J]. 广州化工,2011,39(4)：129-130.
TAN Huaan. Application of feed water oxygenated technology in the energy saving and consumption reduction[J]. Guangzhou Chemical Industry, 2011, 39(4): 129-130.
[4] 蒙宏利,赵小平. 给水加氧处理工况在神二500 MW机组的应用[J]. 科学之友,2012(1)：38-40.
MENG Hongli, ZHAO Xiaoping. Water plus oxygen treatment conditions in the application of God, two 500 MW units [J]. Friend of Science Amateurs, 2012(1): 38-40.
[5] 张朝能. 水体中饱和溶解氧的求算方法探讨[J]. 环境科学研究,1999,12(2),54-55.
ZHANG Chaoneng. Study on calculation method of saturation values of dissolved oxygen in waters [J]. Research of Environmental Sciences, 1999, 12(2), 54-55.
[6] 刘志华,盛春林,马文静. 锅炉给水加氧处理技术及其在1 021 t/h锅炉上的应用[J]. 吉林电力,2003(3)：5-8.
LIU Zhihua, SHENG Chunlin, MA Wenjing. Feed water oxygen treatment and applied to 1 021 t/h boiler [J]. Jilin Electric Power, 2003(3)：5-8.
[7] 刘朝阳. 汽包锅炉给水加氧处理技术及应用条件分析[J]. 河北电力技术,2005,24(6)：27-41.
LIU Zhaoyang. Feed-Water oxygenation treatment of steam drum boiler and application analysis[J]. Hebei Electric Power, 2005, 24(6): 27-41.
[8] 王金玲. 660 MW超-超临界机组给水加氧技术的应用[J]. 清洗世界,2010,26(11):35-38
WAMG Jinling. Application of oxygen supply technique for 660 MW ultra-supercritical units [J]. Cleaning World, 2010, 26(11): 35-38.
[9] 曹洪宇. 潮州电厂600 MW机组给水加氧处理应用情况[J]. 广东电力,2011,24(3)：56-60.
CAO Hongyu. Application of feedwater oxygenated treatment in 600 MW unit in Chaozhou power plant[J]. Guangdong Electric Power, 2011, 24(3): 56-60.
[10] 黄校春,徐洪,赵益民. 超超临界机组实施给水加氧处理的可行性[J]. 中国电力,2011,44(12)：51-54.
HUANG Xiaochun, XU Hong, ZHAO Yimin. The feasibility of feed water oxygenation treatment in ultra-supercritical unit[J]. Eletric Power, 2011, 44(12): 51-54.

[1]	陈欢乐, 归一数, 陈伟, 王阳, 卢宏林, 明磊. 基于加热器切除的深度调频控制技术研究与实施[J]. 中国电力, 2021, 54(3): 168-176.
[2]	张学延, 屈杰, 何国安, 朱蓬勃, 姜广政, 潘渤. 大型汽轮发电机组非典型故障分析[J]. 中国电力, 2020, 53(12): 284-292,300.
[3]	王园园, 高艳锋, 胡大龙, 孟龙, 李健博, 李俊菀, 王璟, 李昭. 凝结水精处理再生废水减量及资源化研究[J]. 中国电力, 2020, 53(11): 252-256.
[4]	仝声, 刘乐, 王鹏飞. 基于多变量广义预测控制算法的两级过热汽温协调联动控制[J]. 中国电力, 2020, 53(10): 215-223.
[5]	伦涛, 鄂志君, 张利, 王鑫, 赵永亮, 严俊杰. 燃煤机组不同灵活性调节方案参与一次调频过程的经济性分析[J]. 中国电力, 2019, 52(8): 164-172.
[6]	王天堃. 基于神经网络模型及预测控制DMC的火电机组脱硝控制策略[J]. 中国电力, 2019, 52(12): 140-145.
[7]	张晓东, 王鹏飞, 刘乐. 基于多变量广义预测控制算法的脱硝优化研究及应用[J]. 中国电力, 2019, 52(10): 178-184.
[8]	牟春华, 吕凯, 许朋江, 孙大伟, 兀鹏越, 马汀山, 居文平, 李冬泉. 辅机统调动力源系统在某660 MW机组的应用[J]. 中国电力, 2018, 51(9): 65-72.
[9]	刘百成, 赵红民, 赫胜杰, 李华威, 李美双, 张继文. 单系列辅机在洛阳热电厂应用实践[J]. 中国电力, 2018, 51(5): 101-105.
[10]	王占洲, 曹丽华, 卫洪刚, 杨明. 风电介入对汽轮机转子寿命影响分析[J]. 中国电力, 2018, 51(4): 101-107.
[11]	钱君霞, 罗建裕, 江叶峰, 罗凯明, 姜太荣, 李亚平, 刘林, 张华成, 施慧娟. 适应特高压电网运行的江苏源网荷毫秒级精准切负荷系统深化建设[J]. 中国电力, 2018, 51(11): 104-109.
[12]	杜振, 杨立强, 魏宏鸽, 叶伟平, 朱跃. 低低温电除尘器对粉尘特性和SO₃脱除效果影响分析[J]. 中国电力, 2017, 50(9): 125-128.
[13]	朱智. 贵州省“W”型火焰锅炉节能及超低排放的调研[J]. 中国电力, 2017, 50(8): 158-162.
[14]	王琦, 白建云, 王欣峰, 王力. CFB锅炉脱硫脱硝系统多目标优化[J]. 中国电力, 2017, 50(7): 109-114.
[15]	王光, 陈俊, 张琦雪, 于海波, 刘乐. 无刷旋转励磁发电机组励磁绕组接地保护系统研制和工程应用[J]. 中国电力, 2017, 50(7): 159-163.

新型自动加氧工艺的控制方法及应用

Control Method and Application of Novel Automatic Oxygen Injection Technology

RichHTML

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

模态框（Modal）标题

新型自动加氧工艺的控制方法及应用

Control Method and Application of Novel Automatic Oxygen Injection Technology

RichHTML

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics