中国电力 ›› 2022, Vol. 55 ›› Issue (4): 85-92.DOI: 10.11930/j.issn.1004-9649.202108009

• 基于电力电子装备的配电网运行控制与形态演变 • 上一篇    下一篇

新一代智能变电站采控装置

李肖博, 于杨, 姚浩, 习伟, 蔡田田   

  1. 南方电网数字电网研究院有限公司,广东 广州 510640
  • 收稿日期:2021-08-06 修回日期:2022-03-02 出版日期:2022-04-28 发布日期:2022-04-24
  • 作者简介:李肖博(1980—),男,硕士,高级工程师,从事电力系统继电保护研究,E-mail:lixb1@csg.cn;于杨(1981—),男,硕士,高级工程师,从事电力系统继电保护研究,E-mail:yuyang@csg.cn;姚浩(1981—),男,硕士,高级工程师,从事电力系统继电保护研究,E-mail:yaohao@csg.cn;习伟(1980—),男,博士,高级工程师(教授级),从事电力系统继电保护研究,E-mail:xiwei@csg.cn
  • 基金资助:
    中国南方电网有限公司科技项目(ZBKJXM20180500);国家重点研发计划资助项目(2017YFB0904900,2018YFB0904902)

Sample-Control-Device of Smart Substation

LI Xiaobo, YU Yang, YAO Hao, XI Wei, CAI Tiantian   

  1. Digital Grid Research Institute, CSG, Guangzhou 510640, China
  • Received:2021-08-06 Revised:2022-03-02 Online:2022-04-28 Published:2022-04-24
  • Supported by:
    This work is supported by Science and Technology Project of China Southern Power Grid Co.,Ltd. (No.ZBKJXM20180500); National Key Research and Development Program of China (No.2017YFB0904900, No. 2018YFB0904902).

摘要: 目前智能变电站广泛采用“智能终端+合并单元”过程层设备,但该方式合并单元无法满足“装置内部单一元件的损坏不能造成保护误动作”的基本要求。同时过程层设备间报文大多为一帧模式,一旦报文出现异常往往会导致保护误动。为提高继电保护的可靠性,提出了采集和控制完全双重化的新一代装置架构,探讨电压无缝选择技术、延时可测交换技术、过程层组网、插值算法等关键技术。新一代采控装置大幅提高了智能变电站的可靠性。

关键词: 智能变电站, 高可靠性, 采控装置, 延时可测

Abstract: At present, smart substations adopt process-level equipment of "intelligent terminals and merging units". In this way, the merging unit cannot meet the basic requirement of "the damage of a single component inside the device cannot cause the protection to malfunction". In the process layer, messages between equipment are mostly in one-frame mode. Once the message is abnormal, it will often cause the protection to malfunction. In order to improve the reliability of relay protection, a new generation device architecture with complete dual is proposed. Key technologies such as voltage seamless selection technology, time-delay measurable switching technology, process layer networking and Lagrange interpolation are proposed.

Key words: smart substation, high reliability, control device, delay measurable