[1] 钱家麟,尹亮.油页岩—石油的补充能源[M].北京:中国石化出版社,2008:81-86.
QIAN Jia-lin, YIN Liang. Oil shale-the added energy of oil[M].Beijing: China Petrochemical Press, 2008:81-86.
[2] PORTILLO P M, IERAPETRITOU M G, MUZZIO F J. Effects of rotation rate, mixing angle, and cohesion in two continuous powder mixers-A statistical approach[J]. Powder Technology, 2009(3): 217-227.
[3] DESCOINS N, DIRION J L, HOWES T. Solid transport in a pyrolysis pilot-scale rotary kiln: preliminary results stationary and dynamic results[J]. Chemical Engineering and Processing, 2005, 44(2): 315-321.
[4] GOLUBEV N. Solid oil shale heat carrier technology for oil shale retorting[J]. Oil Shale, 2003, 20(3): 324-332.
[5] 王擎,徐峰,孙佰仲,等.采用等转化率法研究油页岩热解的动力学特性[J].中国电机工程学报,2007,27(26):35-39.
WANG Qing,XU Feng,SUN Bai-zhong, et al .Study on characteristics in pyrolysis process of oil shales by isoconversional method[J].Proceedings of the CSEE, 2007,27(26):35-39.
[6] 李少华,张立栋,余侃胜,等.回转干馏炉内油页岩颗粒群断续给料混合运动模式[J]. 化工进展,2010, 29(8):1433-1437.
LI Shao-hua, ZHANG Li-dong, YU Kan-sheng, et al . Experimentals on mixed motion with discontinuous feed for oil shale particle group in rotary kiln[J]. Chemical Industry and Engineering Progress, 2010, 29(8): 1433-1437.
[7] BOATENG A A, BARR P V. Granular flow behavior in the transverse plane of a partially filled rotary cylinder [J]. J Fluid Mech, 1997(1): 233-249.
[8] 王春华,陈文仲,陈海耿,等.变径炭素回转窑内物料平均停留时间的计算[J]. 化工学报,2009, 20(3):574-579.
WANG Chun-hua, CHEN Wen-zhong, CHEN Hai-geng, et al . Calculation of mean residence time of solids in variable diameter carbon rotary kiln[J]. CIESC Journal, 2009, 20(3): 574-579.
[9] 李爱民,蔡九菊,王志,等.固体废弃物在回转窑内混合特性的试验[J]. 东北大学学报:自然科学版,2002,23(2): 152-155.
LI Ai-min, CAI Jiu-ju, WANG Zhi, et al . Experimental research on the mixing characteristics of solid waste in rotary kiln[J]. Journal of Northeastern University: Natural Science, 2002, 23(2): 152-155.
[10] 李少华,张立栋,余侃胜,等.回转干馏炉油页岩颗粒停留时间分布[J].华北电力大学学报,2011,38(1):98-102.
LI Shao-hua, ZHANG Li-dong, YU Kan-sheng, et al . Residence time distribution of oil shale particles in experimental rotary retort[J]. Journal of North China Electric Power University, 2011, 38(1): 98-102.
[11] 李少华,张立栋,余侃胜,等.页岩颗粒在回转干馏炉内停留时间的正态性分析[J].中国电机工程学报,2011,31(14):13-18.
LI Shao-hua, ZHANG Li-dong,YU Kan-sheng, et al . Normality analysis on residence time of shale particle in rotary retorting[J].Proceedings of the CSEE,2011,31(14):13-18.
[12] 刘刚,池涌,蒋旭光,等.模拟危险废物颗粒回转窑内运动特性试验研究[J]. 工程热物理学报,2005, 26(2): 343-346.
LIU Gang, CHI Yong, JIANG Xu-guang, et al . Mass transfer of simulative hazardous waste particles in rotary kiln[J]. Journal of Engineering Thermophysics, 2005, 26(2): 343-346.
[13] 李少华,张立栋,张轩,等. 回转式干馏炉内影响颗粒混合运动因素的数值分析[J]. 中国电机工程学报,2011,31(2): 32-38.
LI Shao-hua, ZHANG Li-dong, ZHANG Xuan, et al . Numerical analysis of particle mixing and movement in rotary retorting[J].Proceedings of the CSEE, 2011,31(2):32-38.
[14] 黄志刚.转筒干燥器中颗粒物料流动和传热传质过程的研究[D]. 北京:中国农业大学,2004.
HUANG Zhi-gang. Study on particulate materials flow and heat and mass transfer in rotary dryers[D]. Beijing: China Agricultural University, 2004.
[15] 《运输机械设计选用手册》编辑委员会. 运输机械设计选用手册[M]. 北京:化学工业出版社,1999:335-337.
Editorial board of design and select manual of transport machinery. Design and select manual of transport machinery[M]. Beijing: Chemical industry press, 1999:335-337.
[16] 赵洪滨,王凤辉,姬忠礼. 回转焙烧炉内物料流动性能冷态实验研究[J]. 化工装备技术,2007,28(1): 28-32.
ZHAO Hong-bin, WANG Feng-hui, JI Zhong-li. The cold experimental research of material flow performance in rotation baking furnace[J]. Chemical Equipment Technology, 2007,28(1):28-32.
[17] KOHAV T, RICHARDSON J T, LUSS D. Axial dispersion of solid particles in a continuous rotary kiln[J]. AIChE Joural, 1995, 41(11): 2465-2475.
[18] 严建华,李水清,黄景涛,等. 回转窑内MSW轴向传输和扩散的数学模型和仿真[J]. 工程热物理学报,2002,23(3): 380-383.
YAN Jian-hua, LI Shui-qing, HUANG Jing-tao, et al . Simulation on axial transport and dispersion of MSW in rotary kiln[J]. Journal of Engineering Thermophysics, 2002,23(3):380-383.
[19] BOATENG A A, BARR P V. Modeling of particle mixing and segregation in the transverse plane of rotary kiln[J]. Chem. Eng. Sei., 1996, 51(17):4167-4181. |