火电机组低负荷下主要节能潜力探讨

doi:10.11930/j.issn.1004-9649.2017.03.083.05

摘要/Abstract

摘要： 为降低机组低负荷运行时的供电煤耗,对华能瑞金电厂多年来节能运行优化和技改情况进行深入探讨,总结提出华能瑞金电厂机组低负荷下运行优化方式及节能技改项目。实践证明,机组低负荷运行时,针对锅炉系统进行的2台磨运行,针对汽机系统进行的压力曲线优化、冷端系统优化、凝结水泵节能优化等,实际可操作性强,在保证机组安全可靠的前提下能较好达到节能降耗的目的,具有推广价值。

关键词: 火电机组, 低负荷, 2台磨运行, 压力曲线, 冷端系统, 凝结水泵

Abstract: To reduce the net coal consumption under low loads of the units, in this article, the optimizations and technical retrofits on energy saving of Huaneng Ruijin Power Plant in recent years are discussed thoroughly and the operation optimization plans and the technical retrofit items for low loading conditions are put forward. The practices indicate that when at the low loading operation, the two-mill operation, pressure curve optimization, cold-end optimization, and condensate pump optimization are more operable to achieve energy saving on the premise of ensuring the security and reliability of the units. The discussion results are valuable for popularization.

Key words: thermal power unit, low load, two-mill operation, pressure curve, cold-end system, condensate pump

中图分类号:

TM621

邓山, 李健平, 吕海涛, 张建忠, 吴利平. 火电机组低负荷下主要节能潜力探讨[J]. 中国电力, 2017, 50(3): 83-87.

DENG Shan, LI Jianping, LV Haitao, ZHANG Jianzhong, WU Liping. Discussion on Main Energy Saving Potential under Low Loads of Thermal Power Unit[J]. Electric Power, 2017, 50(3): 83-87.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.2017.03.083.05

https://www.electricpower.com.cn/CN/Y2017/V50/I3/83

参考文献

[1] 朱光明,焦庆丰,李明,等. 大型火电机组低负荷运行经济性研究[J]. 湖南电力,2008,28（1）：24-26,34.
ZHU Guangming, JIAO Qingfeng, LI Ming, et al . Research on economic efficiency of low load operationinlargethermalpower units [J]. Hunan Electric Power, 2008, 28(1): 24-26, 34.
[2] 沈建龙,李晓东. 机组在低负荷运行下的节能控制方式探讨[J]. 宁夏电力,2007（6）：53-55.
SHEN Jianlong, LI Xiaodong. Discussion on energy saving control mode under low load operation of power units [J]. Ningxia Electric Power, 2007(6): 53-55.
[3] 郑磊,杨馥宁. 锅炉低负荷节能运行研究与应用[J]. 化工管理, 2015（22）：161-163.
ZHENG Lei, YANG Funing. Research and application of energy saving of the low boiler load[J]. Chemical Enterprise Management, 2015(22): 161-163.
[4] 李明,周志平,付晨鹏,等. 超临界 600 MW 汽轮机高压调节汽门优化及经济性分析[J]. 汽轮机技术,2010,52（2）：144-146, 149.
LI Ming, ZHOU Zhiping, FU Chenpeng, et al . 600 MW supercritical steam turbine high pressure control valve optimization and economic analysis[J]. Turbine Technology, 2010, 52(2): 144-146, 149.
[5] 范鑫,秦建明,刘静宇,等. 超临界 600 MW 汽轮机低负荷运行优化技术研究[J]. 中国电力,2012,45（11）：18-21.
FAN Xin, QIN Jianming, LIU Jingyu, et al . Study on optimization of low load operation for supercritical 600 MW steam turbines [J]. Electric Power, 2012, 45(11): 18-21.
[6] 罗江勇,吕新乐. 锅炉低负荷工况下脱硝系统投运率提高的改造技术[J]. 中国电力,2015,48（11）：138-141.
LUO Jiangyou, LV Xinle. Retrofit for SCR equipment operation rate improvement under low load conditions on 600 MW supercritical boiler [J]. Electric Power, 2015, 48(11): 138-141.
[7] 胡志宏,郝卫东,薛美盛,等. 1 000 MW 超超临界燃煤锅炉燃烧与 NO x 排放特性试验研究[J]. 机械工程学报,2010,46（4）： 105-110.
HU Zhihong, HAO Weidong, XUE Meisheng, et al . Experimental study on combustion and NO x emission characteristics of 1 000 MW ultra-supercritical coal-fired boiler[J]. Journal of Mechanical Engineering, 2010, 46(4): 105-110.
[8] 郭广领,王炳东,刘先航. 优化运行方式,强化锅炉低负荷稳燃能力[J]. 锅炉技术,2003,34（2）：38-41.
GUO Guangling, WANG Bingdong, LIU Xianhang. Optimizationg the operation mode, improving the stable burning ability of the boiler [J]. Boiler Technology, 2003, 34(2): 38-41.
[9] 郭广领. 制粉系统运行方式对锅炉低负荷运行安全性和经济性的影响[J]. 锅炉技术,2004,35（1）：57-60.
GUO Guang ling. A great influence on safety and economy because of the operating mode of pulverizating system in low load [J]. Boiler Technology, 2004, 35(1): 57-60.
[10] 沈鲁锋,宋绍伟. “W”型火焰锅炉低负荷两台磨运行技术研究[J]. 中国电力,2010,43（9）：53-56.
SHEN Lufeng, SONG Shaowei. Technology study of 2 coal pulverizers operation for W-flame boiler under low load condition [J]. Electric Power, 2010, 43(9): 53-56.
[11] 杨宇,范世望,蒋俊,等. 超超临界1 000 MW 机组加热器对系统热耗率的影响[J]. 热力发电,2016,45（5）：79-83.
YANG Yu, FAN Shiwang, JIANG Jun, et al . Influence of heater on heat consumption rate of an ultra supercritical 1 000 MW unit steam turbine [J]. Thermal Power Generation, 2016, 45(5): 79-83.
[12] 蒋寻寒. 0号高压加热器的分析和应用[J]. 热力透平,2016,45（3）：207-210.
JIANG Xunhan. Analysis and utilization of No.0 high pressure heater [J]. Thermal Turbine, 2016, 45(3): 207-210.
[13] 高亚杰,阚玉英. 基于历史数据分析的汽机调门曲线优化[J]. 华北电力技术,2012（10）：35-39,51.
GAO Yajie, KAN Yuying. Optimization of turbine governor valve curve based on historical data[J]. North China Electric Power, 2012(10): 35-39, 51.
[14] 陈文利. 循环水泵变频改造应用实例[J]. 广东科技,2011,20（10）：103.
CHEN Wenli. Circulating pump inverter application example[J].Guangdong Science & Technology, 2011, 20(10): 103.
[15] 张连涛,余学海. 1 000 MW 机组凝结水泵低负荷运行节能分析[J]. 能源工程,2011（4）：63-65.
ZHANG Liantao, YU Xuehai. Energy conservation analysis of condensate pump for 1 000 MW unit with low load operation [J].Energy Engineering, 2011(4): 63-65.
[16] 杨群发, 侯剑雄, 黄碧亮. 火电厂大型凝结水泵的优化运行[J]. 发电设备, 2016, 30(3):197-201.
YANG Qunfa, HOU Jianxiong, HUANG Biliang. Operation optimization for the large condensate water pump in a thermal power plant [J].Power Equipment, 2016, 30(3):197-201.
[17] 戈志华,杨佳霖,何坚忍,等. 大型纯凝汽轮机供热改造节能研究[J]. 中国电机工程学报,2012,32（17）：25-30.
GE Zhihua, YANG Jialin, HE Jianren, et al . Energy saving research of heating retrofitting for large scale condensing turbine [J]. Proceedings of the CSEE, 2012, 32(17): 25-30.