中国电力 ›› 2016, Vol. 49 ›› Issue (10): 49-54.DOI: 10.11930/j.issn.1004-9649.2016.10.049.06

• 发电 • 上一篇    下一篇

IGCC系统不同气化技术的仿真模拟及性能研究

詹扬12,尤政1,吕俊复1   

  1. 1. 清华大学 机械学院,北京 100084;
    2. 中国电力工程顾问集团华北电力设计院有限公司,北京 100120
  • 收稿日期:2016-03-15 出版日期:2016-10-10 发布日期:2016-11-07
  • 作者简介:詹扬(1962—),湖北襄阳人,博士研究生,高级工程师(教授级),从事洁净煤高效发电技术研究与设计。E-mail: zhanyang@ncpe.com.cn

Studies on Simulation and Performance of Different Gasification Technologies for the IGCC System

ZHAN Yang1, 2, YOU Zheng1, LU Junfu1   

  1. 1. Mechanical Engineering School, Tsinghua University, Beijing 100084, China;
    2. North China Power Engineering Co., Ltd., of China Power Engineering Consulting Group, Beijing 100120, China
  • Received:2016-03-15 Online:2016-10-10 Published:2016-11-07

摘要: 由于THERMOFLEX对热力发电厂和IGCC电厂模拟具有实用方便的优点,因此采用THERMOFLEX软件建立了几类典型气化炉的仿真工艺流程,包括Shell气化炉、Texaco气化炉、E-gas气化炉和U-Gas气化炉,并基于实测工业数据设置相应的仿真气化条件,将各类气化炉的主要合成气成分和比例与工业数据对比分析,逐一验证了每一气化炉仿真模拟结果的准确性。以此为依据,针对同一设计煤种,仿真研究了6种现有气化技术,着重分析对比了它们的主要气化性能指标,并论证了它们用于IGCC系统时的优劣所在,为整体优化IGCC系统奠定了基础。

关键词: 整体煤气化联合循环(IGCC), 气化炉, THERMOFLEX, 性能研究

Abstract: In this paper, due to the convenience of the THERMOFLEX platform in thermal and IGCC power plant simulations, the models are built on the platform for several types of gasifiers including the Shell, Texaco, E-Gas and U-Gas ones. Based on the measured industrial data, the gasification conditions are set for simulation. Through the comparison between the composition of the synthetic gases and the industrial data, the simulation results of the gasifers are validated one by one. Then, the simulative study on six gasification technologies is carried out using the same designed coal. The study conducts the comparison of the main gasification indices between the technologies and analyzes their pros and cons when being applied in the IGCC system. The study results lay a foundation for the optimization of IGCC systems.

Key words: IGCC, gasifier, THERMOFLEX, performance study

中图分类号: