中国电力 ›› 2013, Vol. 46 ›› Issue (12): 20-23.DOI: 10.11930/j.issn.1004-9649.2013.12.20.3

• 电网 • 上一篇    下一篇

基于PSASP用户自定义的UPFC潮流控制模型

李传栋, 林因   

  1. 福建省电力有限公司 电力科学研究院,福建 福州 350007
  • 收稿日期:2013-09-03 出版日期:2013-12-23 发布日期:2015-12-10
  • 作者简介:李传栋(1979—),男,福建泉州人,博士,高级工程师,从事电力系统稳定分析及规划研究。

Study on UPFC Power Flow Control Model Based on PSASP/UD

LI Chuan-dong, LIN Yin   

  1. Electric Power Research Institute of Fujian Electric Power Company Limited, Fuzhou 350007, China
  • Received:2013-09-03 Online:2013-12-23 Published:2015-12-10

摘要: 为建立与电力系统分析综合程序(PSASP)相适应的统一潮流控制器(UPFC)潮流控制模型,提出一种解耦控制方法。串联侧分别采用串联注入电压的q轴和d轴分量控制线路传输的有功功率和无功功率,并联侧基于瞬时功率理论,采用并联侧电流的q轴分量控制UPFC并联接入点母线电压,通过改变UPFC与网络接口节点的注入电流实现UPFC的潮流控制目标。在国内某500 kV电网上进行了潮流控制计算,计算结果表明,所建立的模型正确、可行,完全可用于含UPFC的实际电网的工程研究和分析。

关键词: 统一潮流控制器(UPFC), PSASP软件, 瞬时功率理论, 节点注入电流, 潮流控制

Abstract: A decoupling UPFC power flow control model is established in this paper, which is adaptive with Power System Analysis Software Package(PSASP). On the series side of UPFC, the q-axis and d-axis components of the series-injected voltage are used to control the active and reactive power of the transmission line, respectively. On the shunt side of UPFC, the q-axis component of the UPFC shunt current is used to control the bus voltage of the UPFC-connected point based on the instantaneous power theory. The UPFC power flow control goals are achieved by regulating the injection current of the buses where UPFC is embedded into the system. The established power flow control model is applied to a 500 kV power grid and the calculation results verify that the model is accurate and feasible and can be used for engineering research and analysis of practical power grids with UPFC.

Key words: UPFC, PSASP, instantaneous power theory, bus injection current, power flow control

中图分类号: