碳纤维复合芯导线耐张线夹断裂分析

doi:10.11930.2015.10.97

中国电力 ›› 2015, Vol. 48 ›› Issue (10): 97-100.DOI: 10.11930.2015.10.97

碳纤维复合芯导线耐张线夹断裂分析

刘纯¹，陈红冬¹，欧阳克俭¹，唐远富¹，何朋飞²，李文波¹，龚静²

1. 国网湖南省电力公司电力科学研究院，湖南长沙 410007；
2. 湖南省湘电锅炉压力容器检验中心有限公司，湖南长沙 410004

收稿日期:2015-07-12 出版日期:2015-10-25 发布日期:2015-11-25
作者简介:刘纯（1976—），男，湖北应城人，硕士，高级工程师，从事结构应力分析和安全评估的研究。E-mail: heptri@163.com

Analysis on the Strain Clamp Fracture of ACCC

LIU Chun¹, CHEN Hongdong¹, OUYANG Kejian¹, TANG Yuanfu¹, HE Pengfei², LI Wenbo¹, GONG Jing²

1. State Grid Hunan Electric Power Corporation Research Institute, Changsha 410007, China;
2. Hunan Xiangdian Boiler Pressure Inspection Center Co., Ltd., Changsha 410004, China

Received:2015-07-12 Online:2015-10-25 Published:2015-11-25

摘要/Abstract

摘要： 对某220 kV输电线路碳纤维复合芯导线的失效耐张线夹进行结构检测，发现铝管压接标示线定位错误造成压接后局部应力集中，线夹装配不符合规范要求。通过开展耐张线夹楔型夹握力、铝管握力和引流板温升试验，分析了线夹装配、温升对其握力的影响，指出引流板装配不良在大电流下发热使得楔型夹握力下降，铝管升温、承载并断裂致使碳纤维复合芯棒从楔型夹中脱落。提出碳纤维复合芯导线耐张线夹安装和安全运行的技术要求。

关键词: 碳纤维复合芯导线, 耐张线夹, 断裂分析, 线夹握力

Abstract: A structure testing was conducted on the disabled ACCC strain clamp of a 220 kV transmission line. It was found that the line for hydraulic crimping on the aluminum tube was wrongly positioned after crimping, which resulted in local stress concentration, and the assembly quality of strain clamp was not in conformity with the requirements of the specification. A series tests are conducted, including the holding force test of wedge clamp and aluminum tube, the temperature-rise test of drainage board, and the influences of the clamp assembly and the temperature rise on holding force are discussed. It is concluded that the poor installed drainage board with heavy current generates an enormous amount of heat, which decreases the holding force of clamp, and leads to the temperature rise of aluminum tube. As a result, the aluminum tube may break with loading and the carbon fiber composite core rod may fall off from the wedge clamp. The technical requirements for the installation and safe operation of strain clamp are presented.

Key words: aluminum conductor composite core (ACCC), strain clamp, fracturing analysis, holding force of clamp

中图分类号:

TM727

刘纯，陈红冬，欧阳克俭，唐远富，何朋飞，李文波，龚静. 碳纤维复合芯导线耐张线夹断裂分析[J]. 中国电力, 2015, 48(10): 97-100.

LIU Chun, CHEN Hongdong, OUYANG Kejian, TANG Yuanfu, HE Pengfei, LI Wenbo, GONG Jing. Analysis on the Strain Clamp Fracture of ACCC[J]. journal1, 2015, 48(10): 97-100.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930.2015.10.97

https://www.electricpower.com.cn/CN/Y2015/V48/I10/97

参考文献

[1] 鞠彦忠，李秋晨，孟亚男，等. 碳纤维复合芯导线的特性及应用[J]. 水电能源科学，2012，30（5）：127－129．
JU Yanzhong, LI Qiuchen, MENG Yanan, et al. Characteristics of carbon fiber composite core conductor and its application [J]. International Journal Hydroelectric Energy, 2012, 30(5): 127-129.
[2] 孟宪彬，周斌，李军. 碳纤维复合芯软铝导线的性能及应用[J]. 光纤与电缆及其应用技术， 2013（5）：4-9.
MENG Xianbin, ZHOU Bin, LI Jun. The performance and applications of carbon fiber composite core soft aluminum conductor[J]. Optical Fiber ＆ Electric Cable and Their Applications, 2013(5): 4-9.
[3] 杨宁. ACCC碳纤维复合芯导线技术在我国的应用前景分析[J]. 电气应用，2008，27（5）：50－52．
YANG Ning. Analysis of application prospect of aluminum conductor composite core in China[J]. Electrotechnical Application, 2008, 27(5): 50-52.
[4] 何州文，陈新，王秋玲，等. 国内碳纤维复合芯导线的研究和应用综述[J]. 电力建设，2010，31（4）：90－93．
HE Zhouwen, CHEN Xin, WANG Qiuling, et al. Research and application overview of ACCC conductor in China[J]. Electric Power Construction, 2010, 31(4): 90-93.
[5] 姜文东，张勇. 碳纤维复合芯导线在线路增容工程中的应用[J]. 华东电力，2009，37（3）：418－421．
JIANG Wendong, ZHANG Yong. Application of ACCC to capacity-increasing projects for lines [J]. East China Electric Power, 2009, 37(3): 418-421.
[6] 严行健，王澄. ACCC导线的应用和金具的研制[J]. 电网与水力发电进展，2008，24（6）： 8－11.
YAN Xingjian, WANG Cheng. Application of aluminum conductor composite core and study on metal model [J]. Advances of Power System & Hydroelectric Engineering, 2008, 24(6): 8-11.
[7] 张五洲. 输电线路扩容改造中碳纤维导线及金具的选择[J]. 光纤与电缆及其应用技术，2013（4）：37－38，46．
ZHANG Wuzhou. Selection of carbon fiber composite core conductor and ancillary fittings in the transmission line upgrading and reform project[J]. Optical Fiber ＆ Electric Cable and Their Applications, 2013(4): 37-38, 46.
[8] 周传让，仝伟，仝娜，等. 碳纤维复合芯导线节能配套金具的研制和应用[J]. 电力金具， 2010（2）：5-12.
ZHOU Chuanrang, TONG Wei, TONG Na, et al. Development and application of energy saving power fittings for ACCC[J]. Power Fittings, 2010(2): 5-12.
[9] 余虹云，王梁，李瑞，等. 架空导线用碳纤维复合芯棒拉伸破坏形式分析[J]. 中国电力，2014，47（1）：49－52．
YU Hongyun, WANG Liang, LI Rui, et al. Analysis on the tensile failure modes of carbon fiber composite core rod used in overhead stranded wires [J]. Electric Power, 2014, 47 (1): 49-52.
[10] 李瑞，余虹云，余长水，等. ACCC导线芯棒高温“竹节”现象浅析[J]. 电力建设，2008，29（6）：22－25．
LI Rui, YU Hongyun, YU Changshui, CAO Jun. Discussion on the “Bamboo Knot” phenomena of ACCC cable core under high temperature [J]. Electric Power Construction, 2008, 29(6): 22-25.
[11] 李瑞，余虹云，余长水，等. 碳纤维复合芯铝导线应用时需注意的问题[J]. 电力设备，2008，9（5）：73－75．
LI Rui, YU Hongyun, YU Changshui, et al. Some questions should be paid attention on ACCC in application[J]. Electrical Equipment, 2008, 9(5): 73-75.
[12] 孟宪彬，周斌，李军. 碳纤维复合芯软铝绞线拉断力试验的影响因素[J]. 光纤与电缆及其应用技术，2013（2）：17－19，40．
MENG Xianbin, ZHOU Bin, LI Jun. The influencing factors of the breaking force test for ACCC conductor[J]. Optical Fiber ＆ Electric Cable and Their Applications, 2013(2): 17-19, 40.
[13] 余长水，余虹云，曹钧. 碳纤维复合芯铝导线高温拉断力探讨[J]. 浙江电力，2008，27（3）：44－47．
YU Changshui, YU Hongyun, CAO Jun. Discussion of breaking force of aluminum conductor composite core in high temperature[J]. Zhejiang Electric Power, 2008, 27(3): 44-47.
[14] 兰逢涛，陈新，王英男，等. 新型输电线路用碳纤维复合芯蠕变行为预测[J]. 玻璃钢/复合材料，2014（3）：41－44，31．
LAN Fengtao, CHEN Xin, WANG Yingnan, et al. Creep behavior prediction for composite core of novel electric conductor [J]. Fiber Reinforced Plastics/Composites, 2014(3): 41-44, 31.
[15] 孟宪彬，戴云飞. 碳纤维复合芯导线初始伸长的探讨[J]. 光纤与电缆及其应用技术，2011（6）：8－11．
MENG Xianbin, DAI Yunfei. Discussion on the initial elongation of carbon fiber composite core conductor[J]. Optical Fiber ＆ Electric Cable and Their Applications, 2011(6): 8-11.
[16] 宋丹，张春宇，仝伟，等. 碳纤维复合芯棒断裂原因与金具质量的探讨[J]. 电力金具，2013（2）：42－47．
SONG Dan, ZHANG Chunyu, TONG Wei, et al. Fracture Analysis of carbon fiber composite core and discussion for its fittings[J]. Power Fittings, 2013(2): 42-47.
[17] DL/T 5284—2012 碳纤维复合芯铝绞线施工工艺及验收导则[S]. 北京：中国电力出版社， 2012.
[18] KAMMER C. 铝手册[M]. 北京：化学工业出版社，2009.

碳纤维复合芯导线耐张线夹断裂分析

Analysis on the Strain Clamp Fracture of ACCC

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

[1]	包健康, 高波, 张血琴. 500 kV输电线路耐张线夹电接触计算及其发热研究[J]. 中国电力, 2016, 49(11): 25-30.
[2]	耿江海，周松松，岂小梅. 碳纤维复合芯导线与钢芯铝绞线的起晕特性对比试验[J]. 中国电力, 2015, 48(1): 76-80.

模态框（Modal）标题

碳纤维复合芯导线耐张线夹断裂分析

Analysis on the Strain Clamp Fracture of ACCC

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics