窄通道下排管敷设电缆群负荷优化

doi:10.11930/j.issn.1004-9649.202003131

中国电力 ›› 2021, Vol. 54 ›› Issue (5): 166-173.DOI: 10.11930/j.issn.1004-9649.202003131

窄通道下排管敷设电缆群负荷优化

马爱清¹, 秦波¹, 张华富²

1. 上海电力大学电气工程学院，上海 200090;
2. 国网上海电力公司金山供电公司，上海 200540

收稿日期:2020-03-19 修回日期:2020-06-04 发布日期:2021-05-05
作者简介:马爱清(1975-),女,博士,教授,从事高压电气设备结构优化和绝缘监测研究,E-mail:aqmab@sohu.com;秦波(1993-),男,硕士研究生,从事电缆的载流量与优化研究,E-mail:358056530@qq.com;张华富(1988-),男,硕士,工程师,从事电缆运维工作和输电线路电晕特性研究,E-mail:616278872@qq.com
基金资助:
上海市自然科学基金资助项目(19ZR1420600)；上海绿色能源并网工程技术研究中心科技项目(13DZ2251900)

Ampacity Optimization for Cluster Power Cables Laid in Ducts of Narrow Channel

MA Aiqing¹, QIN Bo¹, ZHANG Huafu²

1. College of Electric Power, Shanghai University of Electric Power, Shanghai 200090, China;
2. State Grid Shanghai Jinshan Power Supply Company, Shanghai 200540, China

Received:2020-03-19 Revised:2020-06-04 Published:2021-05-05
Supported by:
This work is supported by Natural Science Foundation of Shanghai (No.19ZR1420600) and Science and Technology Project of Shanghai Engineering Research Center of Green Energy Grid-connected Technology (No.13DZ2251900)

摘要/Abstract

摘要： 电力管道施工过程中，有时不可避免地要经过道路狭窄或地下管网密集的区域，为了保证安全水平净距，通常将此段电缆群变更为通道较窄的布置方式，但这会导致电缆群载流能力减小。将传热学原理和矩阵论相结合，基于IEC 60287提出了一种窄通道下电缆群不等负荷的矩阵优化方案，针对几种典型排管敷设的窄线路建立了有限元模型并进行温度场仿真，验证了优化方案的准确性；最后通过对实际工程通道变窄前后的负荷进行对比设计了合适的窄线路，结果表明该通流方案可提高电缆的利用率，减小了通道变窄对载流能力的影响，窄线路采用不等负荷通流方案可提高电缆的输电能力，随着回路数的增加最大可提升6.53%。

关键词: 窄通道, 排管敷设, 负荷优化, IEC 60287, 矩阵论, 电缆群

Abstract: In the construction of underground power cables, it is often unavoidable to pass through areas with narrow roads or dense underground pipe networks.In order to keep a safe horizontal distance, it is common to arrange the cluster cables in a narrow underground channel, which however will lead to the ampacity decrease of underground power cables in cluster. Based on the IEC 60287, an unequal load matrix optimization method is proposed for cluster cables in narrow channels by combining the heat transfer theory with matrix theory. To verify the accuracy of the optimization method, a finite element temperature model is established for several typical cable arrangement schemes in narrow underground channels, and the temperature field simulation is performed.Finally, a suitable scheme for narrow-arranged cables is designed after comparing the ampacity of actual underground power cables before and after the underground channel is narrowed. The results show that the proposed scheme can improve the utilization rate of the power cable, and reduce the influence of the narrowed channel on ampacity of power cables. The adopted unequal load flow method for the narrow channels can improve the cable transmission capacity, and it can increase by 6.53% at maximum with the increase of the number of cables loops.

Key words: narrow channel, laid in ducts, ampacity optimization, IEC 60287, matrix theory, cables in cluster

马爱清, 秦波, 张华富. 窄通道下排管敷设电缆群负荷优化[J]. 中国电力, 2021, 54(5): 166-173.

MA Aiqing, QIN Bo, ZHANG Huafu. Ampacity Optimization for Cluster Power Cables Laid in Ducts of Narrow Channel[J]. Electric Power, 2021, 54(5): 166-173.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.electricpower.com.cn/CN/10.11930/j.issn.1004-9649.202003131

https://www.electricpower.com.cn/CN/Y2021/V54/I5/166

参考文献

[1] HERNÁNDEZ JIMÉNEZ V J, CASTRONUOVO E D, RODRÍGUEZ-MORCILLO I S. Optimal statistical calculation of underground cable bundles positions for time-varying currents[J]. International Journal of Electrical Power & Energy Systems, 2018, 95: 26-35.
[2] 刘炎, 夏向阳, 李明德, 等. 高压电力电缆轨迹法在线监测方法[J]. 电力科学与技术学报, 2019, 34(3): 202-210
LIU Yan, XIA Xiangyang, LI Mingde, et al. Research on online monitoring system based on locus method of HV power cable[J]. Journal of Electric Power Science and Technology, 2019, 34(3): 202-210
[3] 刘敏, 孙廷玺, 方义治, 等. 基于权重空间MCMC抽样的高压电缆状态评价方法[J]. 南方电网技术, 2019, 13(10): 62-73
LIU Min, SUN Tingxi, FANG Yizhi, et al. A state evaluation method of high-voltage cable based on weight space MCMC sampling[J]. Southern Power System Technology, 2019, 13(10): 62-73
[4] 刘家军, 杜智亮, 李娟绒, 等. 铁路10kV电力电缆头发热分析与安全监测[J]. 电力系统保护与控制, 2019, 47(24): 131-138
LIU Jiajun, DU Zhiliang, LI Juanrong, et al. Thermal analysis and safety monitoring of railway 10kV power cable joints[J]. Power System Protection and Control, 2019, 47(24): 131-138
[5] 李攀峰, 李春筱, 冯炳. 排管敷设电缆的载流量计算与优化排列[J]. 浙江电力, 2015, 34(12): 19-23
LI Panfeng, LI Chunxiao, FENG Bing. Ampacity calculation and optimized arrangement of cables in ducts[J]. Zhejiang Electric Power, 2015, 34(12): 19-23
[6] 梁永春, 王忠杰, 刘建业, 等. 排管敷设电缆群温度场和载流量数值计算[J]. 高电压技术, 2010, 36(3): 763-768
LIANG Yongchun, WANG Zhongjie, LIU Jianye, et al. Numerical calculation of temperature field and ampacity of cables in ducts[J]. High Voltage Engineering, 2010, 36(3): 763-768
[7] 郑雁翎, 仪涛, 张冠军, 等. 10 kV地下排管电缆的分布式光纤在线测温技术的应用研究[J]. 高压电器, 2010, 46(11): 49-52
ZHENG Yanling, YI Tao, ZHANG Guanjun, et al. On-line temperature monitoring of 10 kV underground cables-in-pipe row based on distributed optical fiber sensing technology[J]. High Voltage Apparatus, 2010, 46(11): 49-52
[8] 邓长征, 肖东, 程小絮, 等. 水平排管敷设的多回电缆线路布置方式优化研究[J]. 三峡大学学报(自然科学版), 2016, 38(4): 82-86, 100
DENG Changzheng, XIAO Dong, CHENG Xiaoxu, et al. Optimization study on layout of multi-loop cable line in horizontal laying[J]. Journal of China Three Gorges University (Natural Sciences), 2016, 38(4): 82-86, 100
[9] 王有元, 陈仁刚, 陈伟根, 等. 电缆沟敷设方式下电缆载流量计算及其影响因素分析[J]. 电力自动化设备, 2010, 30(11): 24-29
WANG Youyuan, CHEN Rengang, CHEN Weigen, et al. Calculation of trench laying cable ampacity and its influencing factors[J]. Electric Power Automation Equipment, 2010, 30(11): 24-29
[10] 陈仁刚. 电力电缆载流量影响因素分析及敷设方式优化方法的研究[D]. 重庆: 重庆大学, 2010.
CHEN Rengang. Analysis of cable ampacity influencing factors and study on the optimization method of cable laying scheme[D]. Chongqing: Chongqing University, 2010.
[11] 罗涛. 电力电缆温度场及载流量计算方法研究[D]. 重庆: 重庆大学, 2009.
LUO Tao. The study on the temperature field and ampacity calculation of power cables[D]. Chongqing: Chongqing University, 2009.
[12] AL-SAUD M S. PSO of power cable performance in complex surroundings[J]. IET Generation, Transmission & Distribution, 2018, 12(10): 2452-2461.
[13] 杨永明, 程鹏, 陈俊, 等. 考虑空气流场影响的电缆散热研究及其影响因素与经济性分析[J]. 电力自动化设备, 2013, 33(1): 50-54
YANG Yongming, CHENG Peng, CHEN Jun, et al. Cable heat dissipation considering air flow field, its influencing factors and economical efficiency[J]. Electric Power Automation Equipment, 2013, 33(1): 50-54
[14] 鲁志伟, 葛丽婷, 郑良华, 等. 地下电力电缆集群的不等间距优化设计[J]. 高电压技术, 2010, 36(8): 2068-2073
LU Zhiwei, GE Liting, ZHENG Lianghua, et al. Optimum design of underground power cables with unequal spacing[J]. High Voltage Engineering, 2010, 36(8): 2068-2073
[15] 樊友兵, 赵健康, 钱康, 等. 单芯电力电缆同相多根并联运行方式分析与优化[J]. 高电压技术, 2010, 36(10): 2607-2612
FAN Youbing, ZHAO Jiankang, QIAN Kang, et al. Analysis and optimation for operation of the single-core power cables in parallel[J]. High Voltage Engineering, 2010, 36(10): 2607-2612
[16] 郭然, 牛海清, 吴炬卓. 基于有限元温度场仿真的排管敷设电缆及新增电缆的位置优化[J]. 中国电力, 2017, 50(7): 169-174
GUO Ran, NIU Haiqing, WU Juzhuo. Position optimization of existing and added cables based on finite element method[J]. Electric Power, 2017, 50(7): 169-174
[17] 鲁志伟, 葛丽婷, 张桂兰, 等. 地下电缆集群的优化运行[J]. 高电压技术, 2009, 35(10): 2557-2561
LU Zhiwei, GE Liting, ZHANG Guilan, et al. Optimal operation of underground power cable in cluster laying[J]. High Voltage Engineering, 2009, 35(10): 2557-2561
[18] 葛丽婷. 地下电缆集群的优化运行与设计[D]. 吉林: 东北电力大学, 2010.
GE Liting. Optimal operation and design of underground power cables in cluster[D]. Jilin: Northeast Dianli University, 2010.
[19] 郑文坚, 牛海清, 宋廷汉, 等. 基于热场仿真及改进粒子群算法的电缆群负荷优化方法[J]. 高电压技术, 2019, 45(6): 2010-2016
ZHENG Wenjian, NIU Haiqing, SONG Tinghan, et al. Load optimization method of cluster power cables based on thermal field simulation and modified particle swarm algorithm[J]. High Voltage Engineering, 2019, 45(6): 2010-2016
[20] MOUTASSEM W, ANDERS G J. Configuration optimization of underground cables for best ampacity[J]. IEEE Transactions on Power Delivery, 2010, 25(4): 2037-2045.
[21] ZARCHI D A, VAHIDI B. Multi objective self adaptive optimization method to maximize ampacity and minimize cost of underground cables[J]. Journal of Computational Design and Engineering, 2018, 5(4): 401-408.
[22] 郑雁翎. 电缆线路的电缆群载流量优化数值计算模型研究[J]. 高电压技术, 2015, 41(11): 3760-3765
ZHENG Yanling. Research on optimal numerical calculation method of cable groups ampacity in cable route[J]. High Voltage Engineering, 2015, 41(11): 3760-3765
[23] TAINE J, PETIT J P. Transferts thermiques[M]. Paris, France: dunod edition, 2003.
[24] 马国栋. 电线电缆载流量[M]. 2版. 北京: 中国电力出版社, 2003.
[25] Calculation of the current rating of electric cables, part 1: current rating equations (100% load factor) and calculation of losses, - general: IEC 60287-1-1: 2006/AMD1: 2014[S]. 2014.
[26] Electric cables-calculation of the current rating- part2-1: thermal resistance-calculation of thermal resistane; Edition 2.0: IEC60287-2-1: 2015[S]. 2015.
[27] ANDERS G J, COATES M, CHAABAN M. Ampacity calculations for cables in shallow troughs[J]. IEEE Transactions on Power Delivery, 2010, 25(4): 2064-2072.
[28] 杨伟航. 电力电缆排管敷设在城市规划道路上的应用[J]. 广东输电与变电技术, 2005, 7(4): 61-63
YANG Weihang. Discussion on applying the form of laying power cable in pipes one by one in the City layout road[J]. Guangdong Power Transmission Technology, 2005, 7(4): 61-63

窄通道下排管敷设电缆群负荷优化

Ampacity Optimization for Cluster Power Cables Laid in Ducts of Narrow Channel

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

[1]	郭然, 牛海清, 吴炬卓. 基于有限元温度场仿真的排管敷设电缆及新增电缆的位置优化[J]. 中国电力, 2017, 50(7): 169-174.
[2]	吴涛, 胡洪华, 黄廷辉, 何新, 王建平, 陈泾, 马玉峰, 王斌. 炼化企业热电厂热电负荷优化分配研究及应用[J]. 中国电力, 2017, 50(12): 93-97.

模态框（Modal）标题

窄通道下排管敷设电缆群负荷优化

Ampacity Optimization for Cluster Power Cables Laid in Ducts of Narrow Channel

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics